Well the cable that connects to it seems fine, I could try using a different
one. Or perhaps an internal wire. I might see if I can figure out how to take
it apart without screwing it up.
Yesterday when I had the issue with the beam being blocked to the back on the
left side, the RF was
Or, if there are any plug connectors in the wiring harness, pull them apart,
clean, connect/disconnect them a few times.
On Sun, Oct 8, 2023, at 20:00, Allan Streib via Mercedes wrote:
> Yeah, check for chafed wiring, maybe mice were dining on it while it
> was in storage.
>
> On Sun, Oct 8,
Yeah, check for chafed wiring, maybe mice were dining on it while it was in
storage.
On Sun, Oct 8, 2023, at 19:42, Buggered Benzmail via Mercedes wrote:
> Sounds like an intermittent electrical fault, bad connection?
>
> --FT
> Sent from iFōn
>
>> On Oct 8, 2023, at 7:19 PM, Kaleb Striplin via
Sounds like an intermittent electrical fault, bad connection?
--FT
Sent from iFōn
> On Oct 8, 2023, at 7:19 PM, Kaleb Striplin via Mercedes
> wrote:
>
> Today I went back and made sure I had the steering wheel centered to the
> rack, which I do not think I did initially. I also did a better
Today I went back and made sure I had the steering wheel centered to the rack,
which I do not think I did initially. I also did a better job of evening out
the tie rods. Got machine all setup again and still getting that damn error for
the RF sensor saying tow transducer has a problem. None of
Today I went back and made sure I had the steering wheel centered to the rack,
which I do not think I did initially. I also did a better job of evening out
the tie rods. Got machine all setup again and still getting that damn error for
the RF sensor saying tow transducer has a problem. None of