Re: [MBZ] Parts cleaner

2022-11-14 Thread Randy Bennell via Mercedes
Have a look on Youtube as well for videos on upgrading your HF parts washer. Mostly a  matter of moving the pump into a 5 gallon pail under the tank and putting a filter inline to clean the solvent. Randy On 14/11/2022 1:24 PM, Jim Cathey via Mercedes wrote: The HF parts washer I bought some

Re: [MBZ] Parts cleaner

2022-11-14 Thread Jim Cathey via Mercedes
The HF parts washer I bought some years ago is entirely adequate, but only if you use solvent. The detergent cleaners were pretty worthless. It also has a fuse in the spring mechanism that holds the lid up, so that if a fire starts it'll drop the lid to smother it. (Assuming your whatsis doesn't

Re: [MBZ] Parts cleaner

2022-11-14 Thread Buggered Benzmail via Mercedes
Good point. I’ll have to scrounge around for some kind of metal box or build one with my new welding skills! --FT Sent from iFōn > On Nov 14, 2022, at 2:17 PM, Allan Streib via Mercedes > wrote: > > If you make one out of plastic I'd be cautious about using any flammable > solvent. Plastic w

Re: [MBZ] Parts cleaner

2022-11-14 Thread Allan Streib via Mercedes
I have not built one but I agree there's nothing to them but a box and a pump. I bought a cheap HF one years ago. Used it a few times, then it ended up sitting for a long time. Don't even know if it still works. But it worked fine at the time and I'd guess it's as cheap as anything you'd make y

Re: [MBZ] Parts cleaner

2022-11-14 Thread MG via Mercedes
I have for years had a similar cleaner. I use Diesel and change it about once a year or whenever it gets too dirty. MG Buggered Benzmail via Mercedes wrote: I was thinking that a small parts cleaner would be useful. I see this one and it seems to be basically a box with a tray and some sort o

Re: [MBZ] Parts cleaner

2022-11-14 Thread OK Don via Mercedes
I've been thinking of making one using an old stainless darkroom sink when I get around to rebuilding an aircraft engine. A 5 gallon can of solvent (mineral spirits, paint thinner, etc.) and pump and a filter of some kind and some hose. I was buying parts cleaner solvent in a 5 gallon can from Trac

[MBZ] Parts cleaner

2022-11-13 Thread Buggered Benzmail via Mercedes
I was thinking that a small parts cleaner would be useful. I see this one and it seems to be basically a box with a tray and some sort of submersible pump to circulate cleaning solvent. Nothing exotic about that. A comment says the pump is akin to a HF pump. Parts Washer 3.5 Gallon Capacity Ta