Re: [MBZ] Resetting ECM was: Re: Whither the OBD Port in a 1986 300E?

2018-08-10 Thread Kaleb C. Striplin via Mercedes
I will dig thru my pile and see if I have one I can send you to try. You might 
look at yours and send me the numbers off it.

Sent from my iPhone

> On Aug 10, 2018, at 10:20 AM, M. Mitchell Marmel  wrote:
> 
> It cuts out at random intervals when it warms up.  Could idle for three hours 
> with no trouble,  could conk out after ten minutes.   Also has sluggish 
> performance from a standing start.   Coil and ignition module replaced so 
> far. 
> 
>> On Fri, Aug 10, 2018 at 7:08 AM Kaleb C. Striplin via Mercedes 
>>  wrote:
>> So tell me again what it is doing? And what has been replaced so far?
>> 
>> Sent from my iPhone
>> 
>> > On Aug 10, 2018, at 6:12 AM, M. Mitchell Marmel via Mercedes 
>> >  wrote:
>> > 
>> > Having gone through the laundry list, we're thinking bad ECM.  Can this be
>> > reflashed?   Are they universal,  or, if I get a used one on eBay,  does it
>> > need to be specifically programmed for the 300E?
>> > 
>> > Thanks!
>> > 
>> > Mitch
>> > 
>> >> 
>> >> 
>> > ___
>> > http://www.okiebenz.com
>> > 
>> > To search list archives http://www.okiebenz.com/archive/
>> > 
>> > To Unsubscribe or change delivery options go to:
>> > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>> > 
>> 
>> 
>> ___
>> http://www.okiebenz.com
>> 
>> To search list archives http://www.okiebenz.com/archive/
>> 
>> To Unsubscribe or change delivery options go to:
>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>> 
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] Resetting ECM was: Re: Whither the OBD Port in a 1986 300E?

2018-08-10 Thread Curt Raymond via Mercedes
 Beat me to it...
Curt

On Friday, August 10, 2018, 11:22:09 AM EDT, Randy Bennell via Mercedes 
 wrote:  
 
 Where is the ECM located?
Can you put a bag of ice on it and see if it acts normally while it is cold?

RB

On 10/08/2018 10:20 AM, M. Mitchell Marmel via Mercedes wrote:
> It cuts out at random intervals when it warms up.  Could idle for three
> hours with no trouble,  could conk out after ten minutes.  Also has
> sluggish performance from a standing start.  Coil and ignition module
> replaced so far.
>


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

  
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] Resetting ECM was: Re: Whither the OBD Port in a 1986 300E?

2018-08-10 Thread Randy Bennell via Mercedes

Where is the ECM located?
Can you put a bag of ice on it and see if it acts normally while it is cold?

RB

On 10/08/2018 10:20 AM, M. Mitchell Marmel via Mercedes wrote:

It cuts out at random intervals when it warms up.  Could idle for three
hours with no trouble,  could conk out after ten minutes.   Also has
sluggish performance from a standing start.   Coil and ignition module
replaced so far.




___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] Resetting ECM was: Re: Whither the OBD Port in a 1986 300E?

2018-08-10 Thread M. Mitchell Marmel via Mercedes
It cuts out at random intervals when it warms up.  Could idle for three
hours with no trouble,  could conk out after ten minutes.   Also has
sluggish performance from a standing start.   Coil and ignition module
replaced so far.

On Fri, Aug 10, 2018 at 7:08 AM Kaleb C. Striplin via Mercedes <
mercedes@okiebenz.com> wrote:

> So tell me again what it is doing? And what has been replaced so far?
>
> Sent from my iPhone
>
> > On Aug 10, 2018, at 6:12 AM, M. Mitchell Marmel via Mercedes <
> mercedes@okiebenz.com> wrote:
> >
> > Having gone through the laundry list, we're thinking bad ECM.  Can this
> be
> > reflashed?   Are they universal,  or, if I get a used one on eBay,  does
> it
> > need to be specifically programmed for the 300E?
> >
> > Thanks!
> >
> > Mitch
> >
> >>
> >>
> > ___
> > http://www.okiebenz.com
> >
> > To search list archives http://www.okiebenz.com/archive/
> >
> > To Unsubscribe or change delivery options go to:
> > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> >
>
>
> ___
> http://www.okiebenz.com
>
> To search list archives http://www.okiebenz.com/archive/
>
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
>
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] Resetting ECM was: Re: Whither the OBD Port in a 1986 300E?

2018-08-10 Thread Kaleb C. Striplin via Mercedes
So tell me again what it is doing? And what has been replaced so far?

Sent from my iPhone

> On Aug 10, 2018, at 6:12 AM, M. Mitchell Marmel via Mercedes 
>  wrote:
> 
> Having gone through the laundry list, we're thinking bad ECM.  Can this be
> reflashed?   Are they universal,  or, if I get a used one on eBay,  does it
> need to be specifically programmed for the 300E?
> 
> Thanks!
> 
> Mitch
> 
>> 
>> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



[MBZ] Resetting ECM was: Re: Whither the OBD Port in a 1986 300E?

2018-08-10 Thread M. Mitchell Marmel via Mercedes
Having gone through the laundry list, we're thinking bad ECM.  Can this be
reflashed?   Are they universal,  or, if I get a used one on eBay,  does it
need to be specifically programmed for the 300E?

Thanks!

Mitch

>
>
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com