The section on setting the slop (33-300) says Place tester on front
wheel hub and set dial guage to approx. 2mm preload but then it says
under Data Wheel bearing end play 0.01-0.02 with no units
--R
On 7/8/13 7:53 AM, Michael Canfield wrote:
Rich,
You better check that spec
On Mon, 08 Jul 2013 10:29:17 -0400 Rich Thomas
richthomas79td...@constructivity.net wrote:
On 7/8/13 7:53 AM, Michael Canfield wrote:
Rich,
You better check that spec again2mm is way too loose.
Mike
The section on setting the slop (33-300) says Place tester on front
wheel
Yeah I am going to go do that later this afternoon, looks like maybe the
rain has stopped for awhile. I was all confused...
--R
On 7/13/13 12:47 PM, Craig wrote:
On Mon, 08 Jul 2013 10:29:17 -0400 Rich Thomas
richthomas79td...@constructivity.net wrote:
On 7/8/13 7:53 AM, Michael Canfield
On Sat, 13 Jul 2013 13:33:21 -0400 Rich Thomas
richthomas79td...@constructivity.net wrote:
Yeah I am going to go do that later this afternoon, looks like maybe
the rain has stopped for awhile. I was all confused...
Don't worry about it, it happens to us all.
Craig
On 7/13/13 12:47 PM,
Rich,
You better check that spec again2mm is way too loose.
Mike
___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
I believe the spec is 0.01-0.02mm, I use 0.0005 which is between lines on my HF
dial indicator.
-Curt
Date: Mon, 8 Jul 2013 07:53:35 -0400
From: Michael Canfield slozuk...@gmail.com
To: Mercedes Discussion List mercedes@okiebenz.com
Subject: Re: [MBZ] Setting my hubs
Message-ID
...@gmail.com
To: Mercedes Discussion List mercedes@okiebenz.com
Subject: Re: [MBZ] Setting my hubs
Message-ID:
calhj_1ceth6qaazcyb_zs5+x9kvjf3n_wugdswzfgmx0gec...@mail.gmail.com
Content-Type: text/plain; charset=ISO-8859-1
Rich,
You better check that spec again2mm is way too
On Mon, 8 Jul 2013 13:16:32 -0400 Michael Canfield slozuk...@gmail.com
wrote:
Yeah, what Curt said. It's been a while. Sorry.
Mike
On Jul 8, 2013 1:15 PM, Curt Raymond curtlud...@yahoo.com wrote:
I believe the spec is 0.01-0.02mm, I use 0.0005 which is between
lines on my HF dial
...@okiebenz.com] On Behalf Of Curt
Raymond
Sent: Monday, July 08, 2013 1:15 PM
To: Diesel List
Subject: Re: [MBZ] Setting my hubs
I believe the spec is 0.01-0.02mm, I use 0.0005 which is between lines on my
HF dial indicator.
-Curt
Date: Mon, 8 Jul 2013 07:53:35 -0400
From: Michael Canfield slozuk
Scott Ritchey wrote:
Yup. It's just enough movement to see detectable needle movement on my
cheapie dial gauge. It also seemed to me that the setting was correct when
you can just barely detect any movement when you push/pull on the disk.
When doing motorcycle valve lash, minimum feel for
Scott Ritchey wrote:
Yup. It's just enough movement to see detectable needle movement on my
cheapie dial gauge. It also seemed to me that the setting was correct when
you can just barely detect any movement when you push/pull on the disk.
When doing motorcycle valve lash, minimum feel for me
Can also rap the wheel as you tighten. The resonance will change when its
right. Put a dial indicator on it and should be spot on.
On Monday, July 8, 2013, Dieselhead 126die...@gmail.com wrote:
Scott Ritchey wrote:
Yup. It's just enough movement to see detectable needle movement on my
Ha!! Sounds like a senior moment like I have sometimes! At least you
noticed something was odd before putting the wheels back on! ;-)
BTW, don't forget the lug nuts
Larry
(waiting for my wife to get home from work so I can try some of the
great suggestions I rec'd to troubleshoot my AT
13 matches
Mail list logo