Re: [meta-xilinx] ZCU102 boot issue

19 12:19 AM >> To: meta-xilinx@yoctoproject.org >> Subject: Re: [meta-xilinx] ZCU102 boot issue >> >> On 30-01-19 14:13, Jean-Francois Dagenais wrote: >>> Hi guys, >>> >>>> On Jan 28, 2019, at 14:39, Manjukumar Harthikote Matha >>>> mailto:

Re: [meta-xilinx] ZCU102 boot issue

Hi Mike, > -Original Message- > From: meta-xilinx-boun...@yoctoproject.org [mailto:meta-xilinx- > boun...@yoctoproject.org] On Behalf Of Mike Looijmans > Sent: Friday, February 01, 2019 12:19 AM > To: meta-xilinx@yoctoproject.org > Subject: Re: [meta-xilinx] ZCU102 boo

Re: [meta-xilinx] ZCU102 boot issue

I agree. Much better then everyone that uses the pmu-firmware having to maintain these same patches in their own custom layer to get a working system. It would be nicer if the actual pmu_cfg_obj.c was not a patch, but just a file in pmu-firmware/files that the recipe copied to the build dir

Re: [meta-xilinx] ZCU102 boot issue

On 30-01-19 14:13, Jean-Francois Dagenais wrote: > Hi guys, > >> On Jan 28, 2019, at 14:39, Manjukumar Harthikote Matha > > wrote: >> >> Hi Alex, >> You need additional patches on pmu-firmware >>

Re: [meta-xilinx] ZCU102 boot issue

Hi guys, > On Jan 28, 2019, at 14:39, Manjukumar Harthikote Matha > wrote: > > Hi Alex, > > You need additional patches on pmu-firmware > See: > https://lists.yoctoproject.org/pipermail/meta-xilinx/2019-January/004198.html >

Re: [meta-xilinx] ZCU102 boot issue

, 2019 10:56 AM To: meta-xilinx@yoctoproject.org Subject: [meta-xilinx] ZCU102 boot issue Hello, I've got a ZCU102 rev 1.1 board and I'm trying to build yocto using this howto: https://github.com/Xilinx/meta-xilinx/blob/master/meta-xilinx-bsp/README.building.md<https://deref-gmx.net/mail/cli

Re: [meta-xilinx] ZCU102 boot issue

This is the error you get if the PMU does not get a config object on boot. When using a boot.bin object from the xilinx tools, the first stage bootloader is Xilinx's FSBL which loads a config object into the PMU at startup before it loads u-boot proper. When you use the instructions in the

[meta-xilinx] ZCU102 boot issue

Hello,   I've got a ZCU102 rev 1.1 board and I'm trying to build yocto using this howto: https://github.com/Xilinx/meta-xilinx/blob/master/meta-xilinx-bsp/README.building.md   There is following error while booting:   U-Boot SPL 2018.01 (Jan 25 2019 - 21:16:27) EL Level:   EL3 Trying to