Hi Vivek,
Vivek Ayer schrieb:
Just wondering if the sparc64 ports supports any binary emulation
modes. COMPAT_LINUX perhaps.
compat_linux(8) only applies to i386 for now. Feel free to port it to
sparc64 ;-)
Also, I was looking into recompiling the kernel in sparc64 and I
notice no such
is there a way to re-attach a USB device (in my example; USB Keyboard)
from the Commandline, so that to the System it appears just as if i had
unplugged and replugged it? I am trying to work around a Problem i am
experiencing, where a certain other Device only works right if i FIRST
plug
Hello
i'm looking for advices as i have recently a lot of errors messages
about CF in my soekris (dmesg at the end)
i reinstall my box and get the following during install
(1: Crucial Tech CF 1GB)
The next step *DESTROYS* all existing data on these partitions!
Are you really sure that you're
Hello,
i'm looking for advices as i have recently a lot of errors messages
about CF in my soekris (dmesg at the end)
i reinstall my box and get the following during install
(1: Crucial Tech CF 1GB)
The next step *DESTROYS* all existing data on these partitions!
Are you really sure that
Use UKC to disable IDE DMA. Cards other than SanDisk seem not to honor
the reset line, so the normal downgrade to PIO modes won't work. It's
more or less a feature.
Theo de Raadt wrote:
is there a way to re-attach a USB device (in my example; USB Keyboard)
from the Commandline, so that to the System it appears just as if i had
unplugged and replugged it? I am trying to work around a Problem i am
experiencing, where a certain other Device only works right
Christopher Linn wrote:
very sorry, mangled my reply and didn't catch it.
On Mon, Oct 20, 2008 at 11:15:27AM -0400, Christopher Linn wrote:
On Mon, Oct 20, 2008 at 10:59:00AM -0400, Brad Tilley wrote:
On Mon, Oct 20, 2008 at 9:35 AM, Julian Leyh [EMAIL PROTECTED] wrote:
make
Hi,
We provide an ADSL service to our clients in our shared building at 1:20
contention from
our 10MB symmetric leased line. For some of our clients we also handle packet
filtering,
rather than leaving it open for their own router to cope with. My problem is
that I cannot
find a way to both
Jussi Peltola wrote on 24/11/08 10:34:
Use UKC to disable IDE DMA. Cards other than SanDisk seem not to honor
the reset line, so the normal downgrade to PIO modes won't work. It's
more or less a feature.
thanks but how i do this with bsd.rd on install ?
from faq
On 2008-11-24, jul [EMAIL PROTECTED] wrote:
thanks but how i do this with bsd.rd on install ?
from faq
http://www.openbsd.org/faq/faq14.html#pciideErr
http://www.openbsd.org/cgi-bin/man.cgi?query=wdsektion=4
i suppose i need to do something like that at boot
boot -c
UKC change wd1
(flag
Use the same queue names for up down and you can use the default keep state.
On 2008-11-24, Matthew Sibson [EMAIL PROTECTED] wrote:
Hi,
We provide an ADSL service to our clients in our shared building at 1:20
contention from
our 10MB symmetric leased line. For some of our clients we also
Stuart Henderson wrote on 24/11/08 13:09:
from faq
http://www.openbsd.org/faq/faq14.html#pciideErr
http://www.openbsd.org/cgi-bin/man.cgi?query=wdsektion=4
i suppose i need to do something like that at boot
boot -c
UKC change wd1
(flag 0x1f to disable dma)
but with pxeboot and bsd.rd, i
Stuart Henderson wrote:
Use the same queue names for up down and you can use the default keep
state.
Wouldn't that mean they get the same bandwidth up and down? We also provide
SDSL and
that costs more!
Matthew
On 2008-11-24, Matthew Sibson [EMAIL PROTECTED] wrote:
Hi,
We provide an
On Sun, Nov 23, 2008 at 07:39:37PM +0100, vincent wrote:
Following this old thread (Feb 08)
http://marc.info/?l=openbsd-miscm=120345491121853w=2 ,
I'm wondering what's the status of booting with root filesystem in
softraid in 4.4 or in -current. It was said by Marco Peereboom in the
same
I'm fiddling around with a redundant VPN-solution. The setup is rather
simple at the moment but will grow more complex over time. Since I've
been having problem even seting up a basic IPSec tunnel(weird timeouts
with random intervals on all connections.). I went with a openvpn
solution instead due
I am using the default spamd.conf file on a 4.4 RELEASE system and I
get several error messages a day:
ftp: connect: Connection timed out
First, why does it mention ftp when I am using http?
Second, why do I regularly get such errors? They occur about 3 a day
on different boxes in different
On 10:22 24 Nov 08, Juan Miscaro wrote:
First, why does it mention ftp when I am using http?
ftp(1) can also be used for http transfers.
Second, why do I regularly get such errors? They occur about 3 a day
on different boxes in different geographical locations (albeit not all
4.4 RELEASE).
On Mon, Nov 24, 2008 at 10:22:26AM -0500, Juan Miscaro wrote:
First, why does it mention ftp when I am using http?
ftp does http too.
man ftp
I;ve just compiled jdk-1.5.0.4
I cannot not make plugin works
/usr/local/jdk-1.5.0/jre/plugin has 2 files .so cannot remember the name
I have copied to to /usr/local/lib/mozilla-plugin
also when i exec manually /usr/local/jdk-1.5.0/bin/ControlPanel,
I see the table which has:
Hi,
I'm trying to set up a simple packet queueing policy on openbsd 4.4.
These are the PF rules I set up :
~# grep -v \# /etc/pf.conf | grep -v ^$
altq on em1 cbq bandwidth 100Mb queue { ftp,other }
queue ftp on em1 bandwidth 1Mb priority 0 cbq(ecn)
queue other on em1 bandwidth
Anirban Sinha([EMAIL PROTECTED])@2008.11.20 19:25:57 -0800:
I am wondering if any work is currently underway to port the latest
OpenNTPD to other platforms? Looks like there has been lot of good work
in OpenNTPD since version 3.9. It would be really nice to have it for
other platforms as well.
On 2008-11-24, Matthew Sibson [EMAIL PROTECTED] wrote:
Stuart Henderson wrote:
Use the same queue names for up down and you can use the default keep
state.
Wouldn't that mean they get the same bandwidth up and down?
no - just list the same queue names for 1 interface.
altq on em0 ...
On 2008-11-24, jul [EMAIL PROTECTED] wrote:
Stuart Henderson wrote on 24/11/08 13:09:
from faq
http://www.openbsd.org/faq/faq14.html#pciideErr
http://www.openbsd.org/cgi-bin/man.cgi?query=wdsektion=4
i suppose i need to do something like that at boot
boot -c
UKC change wd1
(flag 0x1f to
On Monday 24 November 2008 17.24.04 you wrote:
Hi,
I'm trying to set up a simple packet queueing policy on openbsd 4.4.
These are the PF rules I set up :
~# grep -v \# /etc/pf.conf | grep -v ^$
altq on em1 cbq bandwidth 100Mb queue { ftp,other }
queue ftp on em1 bandwidth 1Mb
Hello,
I receive sunfire V100 hardware wifh 512K RAM , IDE cdrom without hard disk.
Does any one know it support regular ide hard drive?
what bsd architecture support it? is it sparc 64 or sun ?
if any one has experience helps to make it work is greatly appreciated since i
have no ideas.
Hi Daniel,
Well, I know this is weird, I come from a linux environment myself,
but according to http://www.openbsd.org/faq/pf/queueing.html queue
designation should take place on another interface than the one where
queueing is applied :
Note that queue designation can happen on an interface
In gmane.os.openbsd.misc, you wrote:
I'm fiddling around with a redundant VPN-solution. The setup is rather
simple at the moment but will grow more complex over time. Since I've
Simple is good.
been having problem even seting up a basic IPSec tunnel(weird timeouts
with random intervals on
On 2008-11-24, LIVAI Daniel [EMAIL PROTECTED] wrote:
On Monday 24 November 2008 17.24.04 you wrote:
Hi,
I'm trying to set up a simple packet queueing policy on openbsd 4.4.
These are the PF rules I set up :
~# grep -v \# /etc/pf.conf | grep -v ^$
altq on em1 cbq bandwidth 100Mb queue {
LIVAI Daniel escreveu:
On Monday 24 November 2008 17.24.04 you wrote:
Hi,
I'm trying to set up a simple packet queueing policy on openbsd 4.4.
These are the PF rules I set up :
~# grep -v \# /etc/pf.conf | grep -v ^$
altq on em1 cbq bandwidth 100Mb queue { ftp,other }
queue ftp on
On 2008-11-24, Damian Higgins [EMAIL PROTECTED] wrote:
However, I did try to apply the queue designation on em1 interface
with the statement pass out quick on em1 from 86.55.8.30 flags any
queue ftp but got the same result. Nothing got matched. I'll paste
the outputs tomorrow because I don't
Damian Higgins escreveu:
Hi Giancarlo,
I pasted my interfaces configuration at the beggining of the thread
but you've probably missed it, let me know if you need other
parameters than :
Sorry, i missed it. Have you tried setting up the altq on the em0
interface? Also, i suggest that you
On Nov 24, 2008, at 9:32 AM, K H A I wrote:
Hello,
I receive sunfire V100 hardware wifh 512K RAM , IDE cdrom without
hard disk.
Does any one know it support regular ide hard drive?
what bsd architecture support it? is it sparc 64 or sun ?
if any one has experience helps to make it work
Brian Keefer wrote:
On Nov 24, 2008, at 9:32 AM, K H A I wrote:
Hello,
I receive sunfire V100 hardware wifh 512K RAM , IDE cdrom without
hard disk.
Does any one know it support regular ide hard drive?
Yes it does, but there is the limitation of the 137GB on it.
So, for example I use
Hi All,
I'm looking at replacing a Cisco 6506 with an OpenBSD machine serving a
university network. The current Cisco setup is basically providing routing and
VLAN trunks to our HP ProCurve switches with some basic firewall services. I'd
like to look at replacing it with an OpenBSD based
On Mon, Nov 24, 2008 at 01:29:24PM -0800, James Peltier wrote:
Hi All,
I'm looking at replacing a Cisco 6506 with an OpenBSD machine serving a
university network. The current Cisco setup is basically providing routing
and VLAN trunks to our HP ProCurve switches with some basic firewall
Quoting James Peltier [EMAIL PROTECTED]:
Hi All,
I'm looking at replacing a Cisco 6506 with an OpenBSD machine
serving a university network. The current Cisco setup is basically
providing routing and VLAN trunks to our HP ProCurve switches with
some basic firewall services. I'd like to look
the server halt after running one day
show uvm_mapent_alloc: out of static map entries when i shutdown it
how can i fix it?
dmesg:
OpenBSD 4.4-stable (GENERIC.MP) #2: Mon Nov 3 10:06:38 CST 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: AMD Athlon(tm) 64 X2 Dual
Call For Papers
The CanSecWest 2009 CFP is now open.
Deadline is December 8th, 2008.
CanSecWest CALL FOR PAPERS
VANCOUVER, Canada -- The tenth annual CanSecWest applied
technical security conference - where the eminent figures
in the international security industry will get
Lost2008_02
www.lostargentina.com.ar
Newsletter #02 - 24-11-2008
MARTN PREZ BICAMPEN LATINOAMERICANO
Martn Prez se consagr por segundo ao consecutivo como el campen
latinoamericano de la categora Longboard, en las olas de Los Caracas
(Venezuela) el argentino se qued
39 matches
Mail list logo
