Hi community,
I'm a newbie and have a few questions according performance in
workstation. The following changes I've made in sysctl.conf:
kern.maxproc=4096
kern.maxthread=4096
kern.maxfiles=32768
further in the login.conf:
staff:\
:datasize-cur=4096M:\
:datasize-max=infinity:\
Hi misc,
I am getting a Pinebook Pro soon and just wondering how many hours the battery
tends to last from a full charge with OpenBSD?
Use case is some web browsing, light code compilation and coding in terminal,
watching occasional tv show on mpv.
Brett.
--
Sent from my Android
Paul Pace writes:
> On 2024-05-02 07:32, Manuel Giraud wrote:
>> table { 127.0.0.1 }
>> table { 127.0.0.1 }
>> table { 127.0.0.1 }
>
> On 2024-05-02 07:02, Zé Loff wrote:
>> table { 10.17.16.10 }
>> table { 10.17.16.10 }
>> table { 10.17.16.10 }
>
> Multiple tables - I didn't
On Fri, May 3, 2024 at 1:15 AM Stuart Henderson
wrote:
> On 2024-05-03, Amit Kulkarni wrote:
> > Hi all,
> > Referring to the existing email chain on bugs@
> > https://marc.info/?l=openbsd-bugs=171468519914343=2
> >
> > Unable to boot to a prompt. How do I recover by booting an older kernel?
>
On 2024-05-03, Harald Dunkel wrote:
> On 2024-05-02 21:25:00, Stuart Henderson wrote:
>>
>> You have an old fw_update(1) manual lying around which should be
>> removed. It moved to fw_update(8).
>>
>
> "Moved"?
Yes.
It used to be in section 1, it has moved to section 8.
Unless you remove the
On 2024-05-02 07:32, Manuel Giraud wrote:
table { 127.0.0.1 }
table { 127.0.0.1 }
table { 127.0.0.1 }
On 2024-05-02 07:02, Zé Loff wrote:
table { 10.17.16.10 }
table { 10.17.16.10 }
table { 10.17.16.10 }
Multiple tables - I didn't see that!
I'm going with something like
On Fri, 03 May 2024 04:29:24 +0200,
Amit Kulkarni wrote:
>
> Unable to boot to a prompt. How do I recover by booting an older kernel?
> There is no /obsd to try out.
Keep current /bsd as /obsd in the case of snapshot migth work only if you're
updating quite oftne, otherwise the userland migth
On 2024-05-02 21:25:00, Stuart Henderson wrote:
You have an old fw_update(1) manual lying around which should be
removed. It moved to fw_update(8).
"Moved"?
And yet another BTW: https://man.openbsd.org/OpenBSD-7.5/ seems to
be forgotten.
Regards
Harri
On 2024-05-03, Amit Kulkarni wrote:
> Hi all,
> Referring to the existing email chain on bugs@
> https://marc.info/?l=openbsd-bugs=171468519914343=2
>
> Unable to boot to a prompt. How do I recover by booting an older kernel?
> There is no /obsd to try out.
sysupgrade doesn't save old kernels
Hi all,
Referring to the existing email chain on bugs@
https://marc.info/?l=openbsd-bugs=171468519914343=2
Unable to boot to a prompt. How do I recover by booting an older kernel?
There is no /obsd to try out.
Thanks
On 2024-05-02, Harald Dunkel wrote:
> On 2024-04-30 13:25:39, Страхиња Радић wrote:
>> Дана 24/04/30 01:12PM, Kirill A. Korinsky написа:
>>> You may download it by hand and install as fw_update /path/to/firmware.tgz
>>
>> BTW, this is in fw_update(8).
>>
>> man 8 fw_update
>> /SYNOPSIS
>>
>
>
Removing the inode check (-Y option) files are updated correctly to ext2fs.
So the command would be:
$ pax -rw -v -Z $files $target
So, it's something with the inode check what doesn't work with ext2fs.
Дана 24/05/02 02:55PM, Harald Dunkel написа:
> SYNOPSIS
>fw_update [-adinv] [-p path] [driver ...]
>
> What is -F supposed to do? What happened to the -i?
I'm not sure what flavor are you using, but you should update it and
the packages (type ‘pkg_add -u’ as root).
With
Paul Pace writes:
> Hello!
>
> I have an OpenBSD server that hosts multiple services listening on
> various ports (some projects have their own web server, some projects
> require a reverse proxy, some projects just use httpd, etc.). This
> server receives requests via relayd on a different
UPDATE
By doing some research I found this to be a bug in ATF.
Since this is another topic I left the message dedicated to it in hope
some openbsd dev would implement a workaround in kernel.
https://marc.info/?l=openbsd-misc=171448854117299=2
On Tue, Apr 30, 2024 at 4:13 PM OBI wrote:
>
> On
On Thu, May 02, 2024 at 06:34:51AM -0700, Paul Pace wrote:
> Hello!
>
> I have an OpenBSD server that hosts multiple services listening on various
> ports (some projects have their own web server, some projects require a
> reverse proxy, some projects just use httpd, etc.). This server receives
On Thu, 2 May 2024 12:03:10, Stuart Henderson wrote
> I don't have a suitable filesystem handy to test, but does OpenBSD's
> implementation of ext2fs support sub-second timestamps?
>
> stat -f %Fm $filename
>
> If not, that's a probable explanation for the difference in behaviour.
> You could
Hello!
I have an OpenBSD server that hosts multiple services listening on
various ports (some projects have their own web server, some projects
require a reverse proxy, some projects just use httpd, etc.). This
server receives requests via relayd on a different server. I was hoping
to not
On Thu, May 02, 2024 at 02:55:33PM +0200, Harald Dunkel wrote:
> On 2024-04-30 13:25:39, ?? wrote:
> > 24/04/30 01:12PM, Kirill A. Korinsky :
> >> You may download it by hand and install as fw_update /path/to/firmware.tgz
> >
> > BTW, this is in
On 2024-04-30 13:25:39, Страхиња Радић wrote:
Дана 24/04/30 01:12PM, Kirill A. Korinsky написа:
You may download it by hand and install as fw_update /path/to/firmware.tgz
BTW, this is in fw_update(8).
man 8 fw_update
/SYNOPSIS
Another BTW:
# fw_update -i
fw_update:
On 2024-05-02, Walter Alejandro Iglesias wrote:
> I expect from that command no more and no less than what is explained in
> the man page:
>
> Update (and list) only those files in the destination directory
> /backup which are older (less recent inode change or file
> modification
I expect from that command no more and no less than what is explained in
the man page:
Update (and list) only those files in the destination directory
/backup which are older (less recent inode change or file
modification times) than files with the same name found in the source
I see, thanks for the detailed explanation.
I'll use mg then. :)
Regards,
--ext
Stuart Henderson írta 2024. máj.. 2, Cs-n 11:15 órakor:
> On 2024-05-02, Mizsei Zoltán wrote:
>> I am unsure if this is the correct list for this to report, but there seems
>> to be other mails regarding ports
On 2024-05-02, Mizsei Zoltán wrote:
> I am unsure if this is the correct list for this to report, but there seems
> to be other mails regarding ports here, so...
po...@openbsd.org is better for ports-related questions.
> I am facing issues with the port of the "micro" editor (written in go) on
Hi,
I am unsure if this is the correct list for this to report, but there seems to
be other mails regarding ports here, so...
I am facing issues with the port of the "micro" editor (written in go) on OBSD
7.5. While the color handling was broken in 7.4, but otherwise the editor used
to work,
On Tue, Apr 30, 2024 at 5:50 AM Walter Alejandro Iglesias
wrote:
> I'd never used pax(1), reading the man page I found this command can be
> used to make a backup:
>
> $ pax -r -w -v -Y -Z home /backup
>
> Faster than using rsync indeed, but it seems that the -Y and -Z options
> don't work
> From your dmesg:
>
> iwx0 at pci6 dev 0 function 0 "Intel Wi-Fi 6 AX210" rev 0x1a, msix
>
> if you read the end of man page for iwx you'll see:
>
> This driver does not support powersave mode.
Ah.
I guess that’s a failure to read man page. Thank you.
I’ve tested disabling the port in
Hello,
Failure to read man pages before posting.
Chris
Sent from Proton Mail Android
Original Message
On 5/1/24 5:42 PM, Kirill A. Korinsky wrote:
> On Thu, 02 May 2024 00:33:47 +0200,
> "Nathaniel Griswold" wrote:
> >
> > Does apmd keep a running average for the
On Thu, 02 May 2024 00:33:47 +0200,
"Nathaniel Griswold" wrote:
>
> Does apmd keep a running average for the current and voltage or is it based
> on instantaneous (as close as that can be)?
>
As far as I understand the code it devides hw.sensors.acpibat0.amphour3
(remaining capacity, Ah) by
On Wed, 01 May 2024 23:58:53 +0200,
"Nathaniel Griswold" wrote:
>
> I guess it's a matter of figuring out which drivers or kernel features are
> saving so much power.
>
From your dmesg:
iwx0 at pci6 dev 0 function 0 "Intel Wi-Fi 6 AX210" rev 0x1a, msix
if you read the end of man page for
> 1. Snapshot's kernel:
>
> Apr 28 13:32:23 matebook apmd: battery status: CRITICAL. external power
> status: not connected. estimated battery life 14% (11 minutes life time
> estimate)
>
> 2. Solene's patch:
>
> May 1 11:52:28 matebook apmd: battery status: CRITICAL. external power
>
On Wed, 01 May 2024 23:54:52 +0200,
"Nathaniel Griswold" wrote:
>
> Interesting, maybe i'll test on it.
>
I've played with this patch a bit more today, as result I've inlined an
updated version to end of this email.
> > Regarding estimated life time:
> >
> > Battery state: high, 66%
>
> I tried disabling cores in my bios down to 3 CPUs and did comparisons and i
> didn't really notice a savings.
That was for idle usage, though. This may help out with an actual workload
> Linux has drivers for devices shutdown when not used and idle power
> states, pretty much like Windows has. Android, who is Linux derived,
> took this concept to a much higher level.
> Think of a wireless card and you can see on man ath(4): " The driver
> does not fully enable power-save
> It is extention of powersave mode which disabling / enabling CPUs.
Interesting, maybe i'll test on it.
> Regarding estimated life time:
>
> Battery state: high, 66% remaining, 152 minutes life estimate
> AC adapter state: not connected
> Performance adjustment mode: powersaving (400
On Tue, 30 Apr 2024 18:07:50 +0200,
"Nathaniel Griswold" wrote:
>
> What could be taking so much power? CPUs are idling.
You may try this patch.
It is extention of powersave mode which disabling / enabling CPUs.
It should degradate to single-core mode, but it may contains bugs :)
Right now
> How does fw_update install the drivers?
> How does it know which driver is missing on the system?
Just list the following sequence (outputs inserted too):
$ which fw_update
/usr/sbin/fw_update
$ cat /usr/sbin/fw_update
#!/bin/ksh
# $OpenBSD: fw_update.sh,v 1.56 2024/03/21 01:02:29 afresh1
> I am conducting my tests with manual hw.setperf=0
I think maybe it’s the drivers not powering down like you said
On Tue, Apr 30, 2024, at 3:13 PM, Mihai Popescu wrote:
> https://marc.info/?l=openbsd-misc=165231418528297=2
>
>
I am conducting my tests with manual hw.setperf=0
On Tue, 30 Apr 2024 21:00:25 +0200,
Kirill A. Korinsky wrote:
>
> On Tue, 30 Apr 2024 18:36:57 +0200,
> Stuart Henderson wrote:
> >
> > https://cneira.github.io/posts/openbsd-save-battery-changes/
>
> Do you have an idea what had happened with it?
>
After reading some code I have a
https://marc.info/?l=openbsd-misc=165231418528297=2
On Tue, 30 Apr 2024 18:36:57 +0200,
Stuart Henderson wrote:
>
> On 2024-04-30, Nathaniel Griswold wrote:
> > What could be taking so much power? CPUs are idling.
>
> some things in this area that people have been looking into:
>
> https://cneira.github.io/posts/openbsd-save-battery-changes/
On Tue Apr 30, 2024 at 5:09 PM BST, Stuart Henderson wrote:
On 2024-04-30, Souji Thenria wrote:
>
> Could you elaborate on your point that Go ports are a pain?
> I thought a port written in Go would probably be easier to maintain
> because no additional libraries are needed to run the
On 2024-04-30, Nathaniel Griswold wrote:
> What could be taking so much power? CPUs are idling.
some things in this area that people have been looking into:
https://cneira.github.io/posts/openbsd-save-battery-changes/
https://github.com/openbsd/src/compare/master...jcs:openbsd-src:jcs
On 2024-04-30, Souji Thenria wrote:
>
> Could you elaborate on your point that Go ports are a pain?
> I thought a port written in Go would probably be easier to maintain
> because no additional libraries are needed to run the program, and
> cross-compilation is relatively easy, too.
With
Kirill thanks for the patch, but i am still worried about the power usage. Even
if i put apmd in manual mode and setperf=0, my system sucks 9-9.5W, which means
the patch will not do much in my situation since any benefit from the patch
comes from setperf=0.
What could be taking so much power?
On Sun, Apr 28, 2024, at 4:17 PM, Mihai Popescu wrote:
> > Any ideas if it's remediable or where to start digging?
>
> Linux has drivers for devices shutdown when not used and idle power
> states, pretty much like Windows has. Android, who is Linux derived,
> took this concept to a much higher
On Tue, Apr 30, 2024, at 7:52 AM, Nathaniel Griswold wrote:
> For this reason, I’m not sure it’s doing straight pass through — it must be
> some kind of hybrid design or something I don’t understand.
For anyone interested, I guess I was wrong it stays at zero current even under
high load. I
On 2024/04/30 16:46, Marc Peters wrote:
> Am Tue, Apr 30, 2024 at 12:03:10PM UTC, schrieb Stuart Henderson:
> > Do be aware that they often have less airflow than the original fans.
> >
> > Sometimes that is not a problem, but sometimes you might want to think
> > twice (especially in, say, the
On Tue Apr 30, 2024 at 3:23 PM BST, Kirill A. Korinsky wrote:
On Tue, 30 Apr 2024 15:30:25 +0200,
"Souji Thenria" wrote:
>
> Could you elaborate on your point that Go ports are a pain? I thought a
> port written in Go would probably be easier to maintain
> because no additional libraries are
Dear Misc,
I own a rockpro64 device + openbsd 7.5 and for some reason
shutdown -p now does not powering off the device
-> shutdown -p now
-
Shutdown NOW!
shutdown: [pid 39459]
*** FINAL System shutdown message from root@*** ***
System
Am Tue, Apr 30, 2024 at 12:03:10PM UTC, schrieb Stuart Henderson:
> Do be aware that they often have less airflow than the original fans.
>
> Sometimes that is not a problem, but sometimes you might want to think
> twice (especially in, say, the power supply in poe switches, which might
> end up
On Tue, 30 Apr 2024 15:30:25 +0200,
"Souji Thenria" wrote:
>
> Could you elaborate on your point that Go ports are a pain? I thought a
> port written in Go would probably be easier to maintain
> because no additional libraries are needed to run the program, and
> cross-compilation is relatively
On Tue Apr 30, 2024 at 1:24 PM BST, Stuart Henderson wrote:
On 2024-04-30, Souji Thenria wrote:
> Hi everyone,
>
> In the last couple of days, I played with the webserver Caddy [1] and
> would like to use it for some of my web applications. However, the
> webserver is currently not in the ports
On Tue, 30 Apr 2024 13:39:55 +0200
"Cristian Danila" wrote:
> HI Olivier,
>
> I cannot express how grateful I am that finally is booting emmc.
> However, I still have an issue, power button does not seem to work
> and shutdown -p now does not really turn off the device.
>
> pw# shutdown -p now
On Tue, 30 Apr 2024 15:01:43 +0200,
"Nathaniel Griswold" wrote:
>
> My serperf seems to be at a consistent zero in my idle tests which makes
> me think the patch may not help my idle tests much, but may help actual
> usage.
>
In my personal use case it allows to win near 30 minutes of battery
On 2024-04-30, Stuart Henderson wrote:
> On 2024-04-30, Souji Thenria wrote:
>> Hi everyone,
>>
>> In the last couple of days, I played with the webserver Caddy [1] and
>> would like to use it for some of my web applications. However, the
>> webserver is currently not in the ports tree. Is there
> Well, I haven't tried it but I've read documentation [1] and it seems a bit
> differently, isn't it?
Um, obsdfreqd sets a cpu frequency “percentage” which I thought might just be
setperf. One difference is it sets a range based on a usage algorithm while
solene’s patch seems to setperf 100 or
> is it an genuine (really in strict sense of the term) brand battery or a
> compatible replacement (even if they call it "genuine", always puzzles me).
> Since I keep alive a lot of vintage laptops and am the author of
> GNUstep's BatteryMonitor I share the experience that non-original
>
On 2024-04-30, Souji Thenria wrote:
> Hi everyone,
>
> In the last couple of days, I played with the webserver Caddy [1] and
> would like to use it for some of my web applications. However, the
> webserver is currently not in the ports tree. Is there a specific reason
> for that, or has no one
On 2024-04-30, Marc Peters wrote:
> Am Mon, Apr 29, 2024 at 05:31:14PM UTC, schrieb Daniel Gracia:
>>I replaced my 8 Pro fans with Noctua units and I'm pretty happy with
>>them; they came with several adapters that allow you to choose the
>>speed of the fans.
>
> +1 for the noctua
Hello,
I'd never used pax(1), reading the man page I found this command can be
used to make a backup:
$ pax -r -w -v -Y -Z home /backup
Faster than using rsync indeed, but it seems that the -Y and -Z options
don't work with ext2fs?
--
Walter
HI Olivier,
I cannot express how grateful I am that finally is booting emmc.
However, I still have an issue, power button does not seem to work
and shutdown -p now does not really turn off the device.
pw# shutdown -p now
Shutdown NOW!
shutdown: [pid 39459]
pw#
*** FINAL System shutdown message
Дана 24/04/30 01:12PM, Kirill A. Korinsky написа:
> You may download it by hand and install as fw_update /path/to/firmware.tgz
BTW, this is in fw_update(8).
man 8 fw_update
/SYNOPSIS
On Tue, 30 Apr 2024 12:35:17 +0200,
fr...@lilo.org wrote:
>
> How does fw_update install the drivers?
It downloads firmware from http://firmware.openbsd.org/firmware/
and installs it as package in system.
> How does it know which driver is missing on the system?
It checks patterns from
Hi everyone,
In the last couple of days, I played with the webserver Caddy [1] and
would like to use it for some of my web applications. However, the
webserver is currently not in the ports tree. Is there a specific reason
for that, or has no one wanted to create and maintain
the port yet?
If
Hello,
Firmwares aren't drivers per say they are required along with the driver
Chris
Sent from Proton Mail Android
Original Message
On 4/30/24 5:35 AM, wrote:
> How does fw_update install the drivers?
> How does it know which driver is missing on the system?
> All
How does fw_update install the drivers?
How does it know which driver is missing on the system?
All these questions to install the drivers manually (offline)
Tks
Am Mon, Apr 29, 2024 at 05:31:14PM UTC, schrieb Daniel Gracia:
>I replaced my 8 Pro fans with Noctua units and I'm pretty happy with
>them; they came with several adapters that allow you to choose the
>speed of the fans.
+1 for the noctua fans from me. I replaced a couple of annoying
On Tue, 30 Apr 2024 11:17:35 +0200,
Kirill A. Korinsky wrote:
>
> Frankly speaking I never care about watt consumption, but offline time which
> is depend on it is important in my case, so here the recovered patch.
>
Here a bit updated version which introduced a flag -P in apmd which you may
On Tue, 30 Apr 2024 05:31:21 +0200,
"Nathaniel Griswold" wrote:
>
> > I had near the same question sometime ago but on different machine, and I've
> > discovered a patch which I've inlinded into this email.
> >
>
> Hm, ok, i'll try it. Do you have any insight into whether obsdfreqd has
> similar
Hi Nathaniel,
Nathaniel Griswold wrote:
I meant to clarify: I have had the battery for over a year and I’m not
sure why the cycles reset to 5. I am puzzled by it.
is it an genuine (really in strict sense of the term) brand battery or a
compatible replacement (even if they call it
Den mån 29 apr. 2024 kl 17:35 skrev Daniel Gracia :
> I replaced my 8 Pro fans with Noctua units and I'm pretty happy with them;
> they came with several adapters that allow you to choose the speed of the
> fans.
For the record, I've also tried this and would recommend Noctua fans.
They look as
> I had near the same question sometime ago but on different machine, and I've
> discovered a patch which I've inlinded into this email.
>
Hm, ok, i'll try it. Do you have any insight into whether obsdfreqd has similar
power saving to this patch? It seems to set the perf similarly. I wasn't
Greetings,
On Sun, 28 Apr 2024 18:53:09 +0200,
"Nathaniel Griswold" wrote:
>
> Any ideas if it's remediable or where to start digging?
>
I had near the same question sometime ago but on different machine, and I've
discovered a patch which I've inlinded into this email.
My laptop on last
On Mon, Apr 29, 2024, at 5:06 AM, Polarian wrote:
> Hello,
>
> Just a quick thing I wanted to point out.
>
> > I have no idea why my charge cycles is so low. It's at 5 now. And i
> > tested that on Linux, too, so it's not just OpenBSD.
>
> Having low charge cycles is good, that isn't the
On Mon, Apr 29, 2024 at 01:47:45AM +0200, Odd Martin Baanrud said:
I’m planning to set up a VPN on my router with iked(8).
The first goal is to have my Macbook and iPhone connected, both to route the
traffic thrugh my router at home, and to get access to the services running on
a machine
On Mon, Apr 29, 2024 at 05:35:49PM +0200, Janne Johansson wrote:
> > Any help is much appreciated. The ER-8 right now idles a lot anyhow and
> > I plan on using it for the 8 RJ45 ports.
>
> I run some Pro 8s in a small rack where I have ripped out the internal
> fan of the edgerouters, and then
Den mån 29 apr. 2024 kl 15:41 skrev Peter J. Philipp :
>
> Hi,
>
> What sort of things can I do to keep an edgerouter 8 cool that doesn't have
> fans? I'm ready to pull the fans out of it because they have a certain
> harmonic that makes me physically ill. But I like the octeon!
>
> So short of
I replaced my 8 Pro fans with Noctua units and I'm pretty happy with them;
they came with several adapters that allow you to choose the speed of the
fans.
Converting to passive cooling, if you have enough room on the cabinet and
are a proficient user of drills, I'd try to (i) remove the heatsink
On Mon, Apr 29, 2024 at 4:42 PM Peter J. Philipp
wrote:
> Hi,
>
> What sort of things can I do to keep an edgerouter 8 cool that doesn't have
> fans? I'm ready to pull the fans out of it because they have a certain
> harmonic that makes me physically ill. But I like the octeon!
>
> So short of
> Did you inject RPI UEFI firmware into the BOOT partition?
Are you talking about some third-party bootloader software? No, I'm
using the default U-Boot that comes with the miniroot. No modification
required.
Hi,
What sort of things can I do to keep an edgerouter 8 cool that doesn't have
fans? I'm ready to pull the fans out of it because they have a certain
harmonic that makes me physically ill. But I like the octeon!
So short of throwing it out I'm thinking of pulling the plug (on the fans).
Would
On Sat, 27 Apr 2024 17:11:56 +0200
"Cristian Danila" wrote:
> Dear Misc,
>
> I would really appreciate if someone can give
> me a hint on how can make emmc card bootable
> on a RockPro64 board.
> This is what I did:
> 1) prepared micro sd card:
> dd if=install75.img of=/dev/sdg bs=1024M
> dd
Has anyone tried this? I read that Microsoft has Hyper-V for ARM.
I've been running OpenBSD on amd64 hardware in Hyper-V for a while. I suspect
there wouldn't be endian issues since arm64 and amd64 are both LE, is there any
other concerns?
I'm inquiring because mainly I know I have my sights
Hello,
I’m planning to set up a VPN on my router with iked(8).
The first goal is to have my Macbook and iPhone connected, both to route the
traffic thrugh my router at home, and to get access to the services running on
a machine behind the router.
I’ve read the VPN section in the FAQ, and I
> Any ideas if it's remediable or where to start digging?
Linux has drivers for devices shutdown when not used and idle power
states, pretty much like Windows has. Android, who is Linux derived,
took this concept to a much higher level.
Think of a wireless card and you can see on man ath(4): "
> Nevertheless, writing egress or $ext_If, what difference does it really
> make? You're just repeating a different word. Lol
It doesn't make any difference for me.
Being curious I added em0 do egress group and restarted all intefaces. However,
em0 seems not to be in ergess group and the rule
> So you are running on battery, not AC.
Yes, i am testing the power usage on battery
> > hw.sensors.acpibat0.raw1=4 (discharge cycles)
>
> Probably not related, but your battery has dropped full charge
> from 3.57 Ah to 3.01 in four cycles?
>
>
> > hw.sensors.acpitz0.temp0=42.80 degC (zone
I trimmed the dmesg.boot to be just the last boot
On Sun, Apr 28, 2024 at 08:01:58PM +0200, Jan Stary wrote:
> > > hw.sensors.acpibat0.volt0=15.40 VDC (voltage)
> > > hw.sensors.acpibat0.volt1=14.29 VDC (current voltage)
> > > hw.sensors.acpibat0.current0=0.69 A (rate)
>
> I think he got it from
On Sun, Apr 28, 2024 at 08:01:58PM +0200, Jan Stary wrote:
> > hw.sensors.acpibat0.volt0=15.40 VDC (voltage)
> > hw.sensors.acpibat0.volt1=14.29 VDC (current voltage)
> > hw.sensors.acpibat0.current0=0.69 A (rate)
I think he got it from here (from dc):
14.29 0.69 * p
9.86
This is explained
Where do you get the > 10W number?
Not in the sysctl output, and you are running on battery.
On Apr 28 11:53:09, n...@fastmail.com wrote:
> I am seeing a lot of power drawn even when nothing is going on on the system
> (top shows everything at zero, load average is 0.01). This is even if the
>
Oh now I remember, you might need to add it to the egress interface group.
Does that rule you posted error out or are you just seeing blocks with it?
On Sun, Apr 28, 2024, 12:49 PM Mike wrote:
> If I remember right, you can run 'ifconfig' and see if that interface is
> marked as an egress
On Sun, Apr 28, 2024, at 11:49 AM, Mike wrote:
> If I remember right, you can run 'ifconfig' and see if that interface
> is marked as an egress interface or not. I can't remember how OBSD
> determines what interfaces are egress or not but your em0 seems to be
I forgot to mention that I have apmd running in automatic mode. I've also tried
obsdfreqd but it does not seem to have much of an effect on or off. Here is my
`sysctl hw.sensors' output (with obsdfreqd on)
```sysctl hw.sensors
hw.sensors.cpu0.temp0=47.00 degC
I am seeing a lot of power drawn even when nothing is going on on the system
(top shows everything at zero, load average is 0.01). This is even if the
backlight is dim.
On an Ubuntu Linxu system, i was getting about 3.5-4W when nothing much was
going on.
Any ideas if it's remediable or where
If I remember right, you can run 'ifconfig' and see if that interface is
marked as an egress interface or not. I can't remember how OBSD determines
what interfaces are egress or not but your em0 seems to be in a private
network so it might not be classifying itself as egress.
Nevertheless,
> change $lan_if to $int_if, change (egress:0) to $ext_carpif, and it will work
> as the rule you say works.
I made minor changes and tested the egress version.
ext_if = "em0"
ext_carpif = "carp0"
int_if = "carp2"
This rule works for me:
match out log on $ext_if from $int_if:network to any
I found a dmesg! Thank you!
https://marc.info/?l=openbsd-bugs=171430467412856=2
No other needed!
-pjp
Tethering worked with openbsd 7.4 bios/mbr.
Doesn't work anymore since installing 7.5 uefi/gpt.
I have to reinstall with a legacy bios boot just to see.
Original message
> From: Zé Loff
> To: Pascal
> Subject: Re: Usb tethering
> Date: 27/04/2024 10:56:37 Europe/Paris
> Cc:
301 - 400 of 183741 matches
Mail list logo