YubiKey blocked by pcscd(8)

Hi all, I was wondering if it's possible to use a YubiKey 5 a bit more conveniently if trying to use more than one of its features. When I have pcscd(8) running, e.g. gpg signing (SmartCard) works but I can't use e.g. challenge-response. After stopping pcscd(8), I can use e.g. ykchalresp(1)

Re: Clock stops working on OpenBSD qemu/kvm guest

Turns out the clock stopped every night at the time when backups were running and thus the VM was paused (saved, or 'managedsaved' if someone uses libvirt) for a minute. Not sure why, though; while I was testing pause/resume the clock didn't stop, it just failed to get synced by ntpd(8). Maybe

Re: Clock stops working on OpenBSD qemu/kvm guest

On Friday, January 26th, 2024 at 13:40, Dave Voutila wrote: > > Lévai, Dániel l...@ecentrum.hu writes: > > > Hi all! > > > > I have this OpenBSD 7.4 qemu/kvm VM managed by libvirt on an Ubuntu 22.04 > > host. [...] > > Anyway, the symptoms are funny

Clock stops working on OpenBSD qemu/kvm guest

Hi all! I have this OpenBSD 7.4 qemu/kvm VM managed by libvirt on an Ubuntu 22.04 host. I started to notice this month that it started to act weird, it seems like the clock stops every night. I couldn't pinpoint exactly what caused the change in behavior, the host had two package updates that

Re: Weird network performance with iwn(4)

Thanks for taking a shot at this! I fiddled with the few options this AP has related to the 5GHz mode, nothing special, really (channel width, number, mode). Interestingly enough, the AP says its Country is set to 'EU' (whatever that means) - can't grasp why it would report 'US', though.

Re: Weird network performance with iwn(4)

Danel Levai wrote: > Stuart Henderson wrote: > > I checked for openwrt support but your AP has a relatively uncommon > > Realtek SoC and it seems fairly unlikely to happen so you're probably > > stuck with the vendor firmware. > > > > Maybe try forcing "mode 11n" or "mode 11g" with ifconfig and

Re: Weird network performance with iwn(4)

Stuart Henderson wrote: > I checked for openwrt support but your AP has a relatively uncommon > Realtek SoC and it seems fairly unlikely to happen so you're probably > stuck with the vendor firmware. > > Maybe try forcing "mode 11n" or "mode 11g" with ifconfig and see if > that's any better.

Re: Weird network performance with iwn(4)

On Thursday, December 7th, 2023 at 19:28, Mihai Popescu > Just a lucky guess, no offense please, are you using ftp2.eu.openbsd.org ? Haha, no problem, it happens with everything, it's not about the mirrors, really, it's really just a frame of reference. Happens with my own mirror, too

Re: Weird network performance with iwn(4)

On Thursday, December 7th, 2023 at 17:10, Stefan Sperling wrote: > > > On Thu, Dec 07, 2023 at 03:39:33PM +0000, Lévai, Dániel wrote: > > > Hi all! > > > > Recently my trusty T410 died (had iwn(4) in it) and had to switch to an > > E450 - but this

Weird network performance with iwn(4)

Hi all! Recently my trusty T410 died (had iwn(4) in it) and had to switch to an E450 - but this has iwm(4). Never had any issues with iwn(4) and iwm(4) seems to operate perfectly fine in some scenarios, e.g. speedtest.net indicates 100/100Mbit down/up speed. But downloading a base74.tgz set

httpd(8) request rewrite - 500 internal server error

Hi all, I was trying to do a basic path rewrite in httpd(8) on 7.2-stable, and I just can't see what I'm missing: httpd.conf: server "host" { listen on egress port 12345 root "/htdocs" location "/" { request rewrite "/to/" } location

Re: pcengines apu{1,4} can't adjust CPU frequency automatically anymore

On Monday, November 28th, 2022 at 08:43, Jan Johansson wrote: > > > > > "Lévai, Dániel" l...@ecentrum.hu wrote: > > > I don't know since when, unfortunately, but it seems > > auto-adjusting CPU frequency doesn't work anymore on my APU1 >

pcengines apu{1,4} can't adjust CPU frequency automatically anymore

Hi all, I don't know since when, unfortunately, but it seems auto-adjusting CPU frequency doesn't work anymore on my APU1 and an APU4 PCEngines boards (I only have these versions at hand atm). They're both running an updated fw at v4.17.0.2. IIRC `apmd -A' + `sysctl hw.perfpolicy=auto' did the

Re: Changing sysctl hw.sensors names on a T410

> On 2022-09-07, Lévai Dániel wrote: > > Doesn't hurt anything really, was just wondering if anyone has seen this > > and maybe have a tech tale of an explanation for it. > > Does it depend on cold/warm boot, or whether it's on battery or plugged in? It's almost always u

Changing sysctl hw.sensors names on a T410

Hey everyone, I noticed this weirdness here on an old but trusty T410 ThinkPad, in that it sometimes changes its sysctl hw.sensors names for its battery. Sometimes it's watthour/power and other times it's amphour/current: hw.sensors.acpibat0.volt0=10.80 VDC (voltage)

how to pledge(2) for Yubikey

Hi all! I'm trying to implement pledge(2) support into kc(1) (in ports) while using it with a Yubikey. So far this is my pledge string: char*pledges = "cpath exec fattr flock proc rpath stdio tty unix wpath"; This covers everything it would do without the Yubikey. But I can't seem

Re: hostname.pppoe0, !/bin/sh when reconnecting

quot; set-state if_up } } == 8< == --  Lévai, Dániel ‐‐‐ Original Message ‐‐‐ On Wednesday, June 17, 2020 5:53 PM, Olivier Taïbi wrote: > I am in a similar situation (pppoe sessions restarts, although my IP addresses > do not change), and I needed to re-a

hostname.pppoe0, !/bin/sh when reconnecting

Hi misc@! I'm trying to run a script whenever I get a new IP address from my ISP over pppoe0. They disconnect me occasionally and the router reconnects then, eg.: /bsd: pppoe: GENERIC ERROR: RP-PPPoE: Child pppd process terminated /bsd: pppoe0: received unexpected PADO last message repeated 2

collectd graphs

Hi everyone! I noticed facette became broken in 6.7. Do you guys use any neat tool to graph collectd RRDs? Preferrably in ports or at most something git-pullable but with no outside deps (relative to base or ports). Thanks for the input! Dani

Re: RCS file ownership?

Hi all! Years ago, I mean 10+, I was -- strangely -- quite actively using RCS for local configuration file history management, and fell into the same pit myself. I made this [1] off the cuff diff then, and reading this thread thought that I need to see how badly it would apply for today's

Re: smtpd accept client certificate only from a specific CA

Sorry, running 6.5-stable. Eredeti üzenet Be 2019. júl. 24. 19:13, Lévai, Dániel írta: > Hi all! > > I have this on my relay host: > > smtpd.conf: > ca myCA cert "/path/to/myCA.pem" > > listen on egress port submission \ > tls-require v

smtpd accept client certificate only from a specific CA

Hi all! I have this on my relay host: smtpd.conf: ca myCA cert "/path/to/myCA.pem" listen on egress port submission \ tls-require verify \ ca myCA Now with that I expected that it'll only accept smtp clients that provide a certificate signed by myCA, but it turns out it accepts any

IPsec redirect to internal LAN

Hi all! I've been trying to figure out how to direct traffic into internal hosts through IPsec (IKEv2, enc0). My client is an Android phone, using strongSwan, connecting to an OpenBSD 6.5 VPN concentrator. The VPN server has two IP addresses on enc0, 172.16.0.1/24 and 172.16.0.21/24. I wanted

Re: L2TP/IPSec PSK with Android -- INVALID_ID_INFORMATION

Oh, and one other issue, if anyone gets bitten by this: Don't use the 'any' keyword after the 'from'/'to' attributes. Even though iked.conf(5) says you can, I got an "unsupported address family 0" error from iked. 0.0.0.0/0 works instead. --  Lévai, Dániel ‐‐‐ Origin

Re: L2TP/IPSec PSK with Android -- INVALID_ID_INFORMATION

packets :) Dani ‐‐‐ Original Message ‐‐‐ On Monday, 1 July 2019 19:34, Stuart Henderson wrote: > On 2019-06-30, Lévai Dániel l...@ecentrum.hu wrote: > > > I know (saw) this has come up numerous times, and someone has been > > successful, others weren't. I though

L2TP/IPSec PSK with Android -- INVALID_ID_INFORMATION

pipsec-vpn-for-android.html http://openbsd-archive.7691.n7.nabble.com/L2TP-IPSec-via-npppd-won-t-work-with-Android-5-x-td290194.html --  Lévai, Dániel publickey - leva@ecentrum.hu - 0x66E1F716.asc Description: application/pgp-keys

Multicast traffic on pflog0

Hi list! I was wondering if someone could explain this, because I've been scratching my head for a while now. I'm seeing multicast traffic logged on pflog0 for some reason -- they are 'igmp nreport' stuff from IPs in my internal network, totally legit by the way, they are supposed to do that,

Re: The right way to view the current input layout in X

That's the thing, that doesn't tell you which specific layout is active (from us,ru). I've been using skb for ages for this: https://plhk.ru/ It does the job. Dani ‐‐‐ Original Message ‐‐‐ On Tuesday, 28 May 2019 14:39, Robert Klein wrote: > On Tue, 28 May 2019 14:50:30 +0300 >

Re: athn: device timeout

On Sunday, 19 May 2019 20:42, Stefan Sperling wrote: > On Sun, May 19, 2019 at 05:38:03PM +0000, Lévai, Dániel wrote: > > > And for some reason -- and this is really strange, I know --, sometimes it > > gets into a state where no client can connect/auth to the AP, and

Re: athn: device timeout

On Sunday, 19 May 2019 18:48, Stefan Sperling wrote: > On Sun, May 19, 2019 at 02:30:25PM +0000, Lévai, Dániel wrote: > > > Hi everyone! > > I wonder if this 0 particular issue is what I'm experiencing. Judging from > > the fact that the only thing needed for this to ha

athn: device timeout

PADO pppoe0: pap failure pppoe: GENERIC ERROR: RP-PPPoE: Child pppd process terminated pppoe0: received unexpected PADO pppoe0: received unexpected PADO pppoe0: received unexpected PADO pppoe0: pap failure pppoe: GENERIC ERROR: RP-PPPoE: Child pppd process terminated pppoe0: received unexpected PADO pppoe0: received unexpected PADO pppoe0: received unexpected PADO pppoe0: pap failure pppoe: GENERIC ERROR: RP-PPPoE: Child pppd process terminated pppoe: GENERIC ERROR: RP-PPPoE: Child pppd process terminated athn0: device timeout athn0: device timeout athn0: device timeout athn0: device timeout athn0: device timeout --  Lévai, Dániel

Re: Trying to find what leaks in 6.4 after a recent network topology change

Stuart Henderson @ 2019-04-15T15:39:30 +0200: > On 2019-04-15, LÉVAI Dániel wrote: > > Hi! > > > > > > After a recent network configuration change (added re(4), vether(4)) I'm > > experiencing this memory leak from somewhere. > > > > How can I che

Trying to find what leaks in 6.4 after a recent network topology change

port 3 configuration 1 interface 0 "American Power Conversion Back-UPS XS 1400U FW:926.T1 .I USB FW:T1" rev 1.10/1.06 addr 3 uhidev0: iclass 3/0, 123 report ids upd0 at uhidev0 upd0 detached uhidev0 detached uhub3: device problem, disabling port 3 uhub3: port error, restarting port 3 uhidev0 at uhub3 port 3 configuration 1 interface 0 "American Power Conversion Back-UPS XS 1400U FW:926.T1 .I USB FW:T1" rev 1.10/1.06 addr 3 uhidev0: iclass 3/0, 123 report ids upd0 at uhidev0 -- LÉVAI Dániel PGP key ID = 0x83B63A8F Key fingerprint = DBEC C66B A47A DFA2 792D 650C C69B BE4C 83B6 3A8F

Re: Nextcloud with httpd(8)

d made a test account for them, they found no issues. Now I'll try to somehow get logs from the application, but this is now unrelated to OpenBSD. Thanks for helping out Bruno, much appreciated! Dani -- LÉVAI Dániel PGP key ID = 0x83B63A8F Key fingerprint = DBEC C66B A47A DFA2 792D 650C C69B BE4C 83B6 3A8F

Re: RS-232 serial to ethernet

Thank you everyone so much for the information! There are now some interesting alternatives for me to look at! Cheers, Dani LÉVAI Dániel @ 2019-04-08T18:04:37 +0200: > Hi misc@! > > I was wondering if I could use some budget solution to access my OpenBSD > machine via its serial

RS-232 serial to ethernet

o-Ethernet-TCP-IP-Server-Module-Ethernet-Converter/32685599659.html -- LÉVAI Dániel PGP key ID = 0x83B63A8F Key fingerprint = DBEC C66B A47A DFA2 792D 650C C69B BE4C 83B6 3A8F

Re: Nextcloud with httpd(8)

Hi Bruno! Bruno Flückiger @ 2019-04-02T06:58:15 +0200: > On 01.04., LÉVAI Dániel wrote: > > Hey Bruno! > > > > Hi Dani > > > That's the most curious thing, nothing shows up in the logs when the app > > says "Download failed/Could not download ". >

Re: Nextcloud with httpd(8)

images)","userAgent":"Mozilla\/5.0 (Android) ownCloud-android\/3.5.1","version":"15.0.5.3"} I don't believe it's related, though. I can upload anything from the app, and I can do (even download) anything on Nextcloud's web UI. It's just the Android

Nextcloud with httpd(8)

, does anyone here use nextcloud from ports on OpenBSD with httpd(8) and the infamous Nextcloud Android app? Dani -- LÉVAI Dániel PGP key ID = 0x83B63A8F Key fingerprint = DBEC C66B A47A DFA2 792D 650C C69B BE4C 83B6 3A8F

Re: Intel i350 Offloading not working

69=1.270 Without trying to sound like the chicken [1], if you're adventurous enough, you can always enable it for I350 and 1) recompile 2) try 3) report back / send in diff :) Daniel [1] https://en.wikipedia.org/wiki/The_Chicken_and_the_Pig -- LÉVAI Dániel PGP key ID = 0x83B63A8F Key fingerprint = DBEC C66B A47A DFA2 792D 650C C69B BE4C 83B6 3A8F

Re: Intel i350 Offloading not working

LÉVAI Dániel @ 2018-07-18T09:20:15 +0200: > Adonis Peralta @ 2018-07-18T03:47:43 +0200: > > Hi, > > [...] > > ifconfig on my lan port shows: > > > > ``` > > em2: flags=8843 mtu 1500 > > hwfeatures=10 hardmtu 9216 > > lladdr 00:1

Re: Intel i350 Offloading not working

ckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.05 addr 2 uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub&quo

Re: Rebuilding a degraded RAID5 softraid array

LÉVAI Dániel @ 2017-06-20T10:22:27 +0200: > Joel Sing @ 2017-06-19T18:14:30 +0200: [...] Hit reply too fast. > > > You in fact gave the advice at a so lucky time, that I was about to > > > return the disk for a warranty replacement -- had I done that, I could > > >

Re: Rebuilding a degraded RAID5 softraid array

Joel Sing @ 2017-06-19T18:14:30 +0200: > On Friday 16 June 2017 10:11:20 LÉVAI Dániel wrote: > > Karel Gardas @ 2017-06-15T09:07:39 +0200: > > > On Thu, Jun 15, 2017 at 7:04 AM, LEVAI Daniel <l...@ecentrum.hu> wrote: > > [...] > > > > > > Strang

Re: Rebuilding a degraded RAID5 softraid array

ave keep the failing disk connected. Anyway, all sync'd now, and the rebuild speed was quite good -- around 100MB/s --, so it basically finished overnight. Thanks again, Daniel -- LÉVAI Dániel PGP key ID = 0x83B63A8F Key fingerprint = DBEC C66B A47A DFA2 792D 650C C69B BE4C 83B6 3A8F

Re: Rebuilding a degraded RAID5 softraid array

Karel Gardas @ 2017-06-15T09:07:39 +0200: > On Thu, Jun 15, 2017 at 7:04 AM, LEVAI Daniel wrote: > > Thanks Karel for pointing this out, you are in fact right, and > > nothing is wrong with the logging, I just forgot that I'm decrypting > > that device 'automatically' in

Rebuilding a degraded RAID5 softraid array

0.00 addr 2 vscsi0 at root scsibus3 at vscsi0: 256 targets softraid0 at root scsibus4 at softraid0: 256 targets sd7 at scsibus4 targ 1 lun 0: <OPENBSD, SR RAID 1, 006> SCSI2 0/direct fixed sd7: 228933MB, 512 bytes/sector, 468856433 sectors softraid0: not all chunks were provided; attempting to bring volume 1 online softraid0: trying to bring up sd7 degraded softraid0: sd7 is offline, will not be brought online root on sd7a (625bf83321ffc7ea.a) swap on sd7b dump on sd7b sd8 at scsibus4 targ 2 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed sd8: 155872MB, 512 bytes/sector, 319227056 sectors -- LÉVAI Dániel PGP key ID = 0x83B63A8F Key fingerprint = DBEC C66B A47A DFA2 792D 650C C69B BE4C 83B6 3A8F

Findig the bad device in a degraded softraid RAID5

5d9,sd3:d4945527f3b6f5b6,sd4:2e2a1c57ee8b6dc3, 02a11b61f9,sd11:493bc0dd8d86c23f Thanks, Daniel -- LÉVAI Dániel PGP key ID = 0x83B63A8F Key fingerprint = DBEC C66B A47A DFA2 792D 650C C69B BE4C 83B6 3A8F

Re: DHCP over vr(4) on bridge(4) through vether(4) no working?

Raimo Niskanen @ 2016-10-07T09:46:06 +0200: > Hello misc@ > > I have a home router where it seems that DHCP over vr(4) on bridge(4) > through vether(4) does not work. > [...] > Any hints on how to procede? Just a shot in the dark, but maybe: http://marc.info/?l=openbsd-misc=147462832805431=2

Re: 6.0-stable bridge doesn't "forward"

LÉVAI Dániel @ 2016-09-23T11:50:21 +0200: > Hi! > > Yesterday I've upgraded to 6.0, and my Wi-Fi AP (bridge) kind of stopped > working. > It's a setup like this: [...] > I start dhclient on 'Client', then trace the discover packet to the router's > dhcpd(8), and the offer bac

6.0-stable bridge doesn't "forward"

yte fifo pcppi0 at isa0 port 0x61 spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 wbsio0 at isa0 port 0x2e/2: NCT5104D rev 0x52 usb5 at ohci2: USB revision 1.0 uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1 usb6 at ohci3: USB revision 1.0 uhub6 at usb6 "ATI OHCI root hub" rev 1.00/1.00 addr 1 umass0 at uhub2 port 1 configuration 1 interface 0 "Generic Flash Card Reader/Writer" rev 2.01/1.00 addr 2 umass0: using SCSI over Bulk-Only scsibus2 at umass0: 2 targets, initiator 0 sd1 at scsibus2 targ 1 lun 0: <Multiple, Card Reader, 1.00> SCSI2 0/direct removable serial.058f6366058F63666485 vscsi0 at root scsibus3 at vscsi0: 256 targets softraid0 at root scsibus4 at softraid0: 256 targets root on sd0a (523379404f543826.a) swap on sd0b dump on sd0b -- LÉVAI Dániel PGP key ID = 0x83B63A8F Key fingerprint = DBEC C66B A47A DFA2 792D 650C C69B BE4C 83B6 3A8F

Re: Two athn devices acting weird

Stuart Henderson @ 2016-05-18T10:23:26 +0200: > On 2016-05-15, Mihai Popescu wrote: > > The other thing is you have managed to obscure the MACs > > They're in the IPv6 addresses. > Allright-allright :D I messed up. Daniel

Re: Two athn devices acting weird

Stefan Sperling @ 2016-05-16T11:36:58 +0200: > On Sun, May 15, 2016 at 09:36:19PM +0200, LÉVAI Dániel wrote: > > hostname.athn0: > > ==8<== > > media autoselect > > mode 11g > > chan 10 > > nwid daniell > > wpakey _ > > w

Re: Two athn devices acting weird

Mihai Popescu @ 2016-05-15T22:48:51 +0200: > Can you delete the 'media autoselect' from both configurations? Doesn't make any difference. As I mentioned, if I rerun netstart *with the same* hostname.if file, it sets it up properly. > The other thing is you have managed to obscure the MACs but

Two athn devices acting weird

.I USB FW:T1" rev 1.10/1.06 addr 4 uhidev2: iclass 3/0, 123 report ids upd0 at uhidev2 uhub3: illegal enable change, port 3 upd0 detached uhidev2 detached uhub3: device problem, disabling port 3 uhub3: port error, restarting port 3 uhidev2 at uhub3 port 3 configuration 1 interface 0 "American Power Conversion Back-UPS XS 1400U FW:926.T1 .I USB FW:T1" rev 1.10/1.06 addr 4 uhidev2: iclass 3/0, 123 report ids upd0 at uhidev2 uhub3: illegal enable change, port 3 -- LÉVAI Dániel PGP key ID = 0x83B63A8F Key fingerprint = DBEC C66B A47A DFA2 792D 650C C69B BE4C 83B6 3A8F

Re: assigning ipv6 addresses to interfaces

cd/info/59cdbb6e777c4bec I'm currently using that patch on top of the 6.10.2 port from -current, and getting the same result as before. (Just in case someone will run into this) Daniel -- LÉVAI Dániel PGP key ID = 0x83B63A8F Key fingerprint = DBEC C66B A47A DFA2 792D 650C C69B BE4C 83B6 3A8F

Re: assigning ipv6 addresses to interfaces

obsd @ 2016-01-31T17:49:04 +0100: > On 31-01-16 17:13, LÉVAI Dániel wrote: [...] > >So turns out, that if I request anything other than sla_id 0 or 1, I get > >another subnet, but with a /72 prefix. Also, using: > >ia_pd 1 re1/1 athn0/2 athn1/3 > >... resulted in the sa

Re: assigning ipv6 addresses to interfaces

Stuart Henderson @ 2016-01-30T23:01:54 +0100: > On 2016-01-30, LÉVAI Dániel <l...@ecentrum.hu> wrote: > > Hi! > > > > My ISP recently enabled ipv6 on their network, and started sending > > router advertisements (offering a /64 prefix) on their pppoe end. So now &g

Re: assigning ipv6 addresses to interfaces

LÉVAI Dániel @ 2016-01-31T14:10:21 +0100: > Stuart Henderson @ 2016-01-30T23:01:54 +0100: > > On 2016-01-30, LÉVAI Dániel <l...@ecentrum.hu> wrote: > > > Hi! > > > > > > My ISP recently enabled ipv6 on their network, and started sending > >

assigning ipv6 addresses to interfaces

address. Does this make sense? Is this possible? Daniel -- LÉVAI Dániel PGP key ID = 0x83B63A8F Key fingerprint = DBEC C66B A47A DFA2 792D 650C C69B BE4C 83B6 3A8F

Unable to umount a USB drive without -f

0/direct fixed sd3: 476936MB, 512 bytes/sector, 976766528 sectors root on sd3a (f4326f22d7495af3.a) swap on sd3b dump on sd3b sd4 at scsibus4 targ 2 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed sd4: 488381MB, 512 bytes/sector, 1000206308 sectors ### AML PARSE ERROR (0xd514): Undefined name: D1F0 error evaluating: \\_GPE._L09 -- LÉVAI Dániel PGP key ID = 0x83B63A8F Key fingerprint = DBEC C66B A47A DFA2 792D 650C C69B BE4C 83B6 3A8F

Re: wle200nx WiFi card on apu2b4 - no link

ly problem with my WLE card was that I set the mode to 11g before setting it to a 5GHz channel, and that combo does not exist, and I could not set it back without a reboot. But other than that, it is performing really well, set to 11a and 5GHz. Daniel -- LÉVAI Dániel PGP key ID = 0x83B63A8F Key fingerprint = DBEC C66B A47A DFA2 792D 650C C69B BE4C 83B6 3A8F

Re: drops to ddb when disconnecting from serial line

Tati Chevron @ 2015-12-27T22:32:45 +0100: > On Sun, Dec 27, 2015 at 07:04:10PM +, Stuart Henderson wrote: > >On 2015-12-27, Ted Unangst <t...@tedunangst.com> wrote: > >>LÉVAI Dániel wrote: > >>>So I guess it didn't panic, but just dropped to ddb from conso

drops to ddb when disconnecting from serial line

ed PADO pppoe0: pap failure pppoe: GENERIC ERROR: RP-PPPoE: Child pppd process terminated pppoe0: received unexpected PADO pppoe0: received unexpected PADO pppoe0: pap failure pppoe: GENERIC ERROR: RP-PPPoE: Child pppd process terminated pppoe0: received unexpected PADO pppoe0: received unexpecte

UPDATE: fonts/terminus

.tar.gz) = MQg4OYazZaS5zAjDGkGVGW9t6XTSc1139sbvqf6x9b8= -SIZE (terminus-font-4.39.tar.gz) = 324890 +SHA256 (terminus-font-4.40.tar.gz) = ZPUsJNPxweOfIebEMHepvj4h1DhPF29XZsAFWLpnBxE= +SIZE (terminus-font-4.40.tar.gz) = 558440 Daniel -- LÉVAI Dániel PGP key ID = 0x83B63A8F Key fingerprint = DBEC

Re: UPDATE: fonts/terminus

LÉVAI Dániel @ 2015-11-13T10:20:35 +0100: > Hi! > > Update to terminus font: Sorry, wrong list.

Intel I218-V NIC -- hardware initialization failed

  uaudio0 port 4 disabled port 5 disabled port 6 addr 6: full speed, power 100 mA, config 1, VFS5011 Fingerprint Reader(0x0011), Validity Sensors(0x138a), rev 0.78, iSerialNumber 7a09f8ea7da9   ugen0 port 7 addr 7: full speed, self powered, config 1, product 0x0a2a(0x0a2a), Intel(0x8087), rev 0.0

Re: smtpd.conf.5 relay tls | verify

. +.Ic tls verify +options should only be used in private networks as they will prevent proper +relaying on the Internet. .It Xo .Ic relay via .Ar host -- LÉVAI Dániel PGP key ID = 0x83B63A8F Key fingerprint = DBEC C66B A47A DFA2 792D 650C C69B BE4C 83B6 3A8F

smtpd.conf.5 relay tls | verify

Hi! I maybe have overlooked something, but this syntax mentioned in the manual didn't work: accept from any for domain ... relay backup verify expire 30d ... on the other hand, this has been working: accept from any for domain ... relay backup tls verify expire 30d ... and writing only 'tls'

Extend RAID 5

create a RAID5(4 disks) and a RAID0(2 disks) array and then create another RAID0 from these two former softraids? Thanks, Daniel [1] - http://marc.info/?l=openbsd-techm=142877132517229w=2 -- LÉVAI Dániel PGP key ID = 0x83B63A8F Key fingerprint = DBEC C66B A47A DFA2 792D 650C C69B BE4C 83B6 3A8F

tmux move-window behavior changed

Hi! Suddenly I realized that I can not move a window to a non-existing (new) window number? Like if I have windows at [0:mutt 1:ksh], I can not do `move-window -s 1 -t 8' anymore, it just stays at 1. This had to work before. Am I just being silly? Daniel

Re: SIL3114 SATA RAID controller

ports? I have a Silicon Image PCI SATA card, like this: CMD Technology SiI3512 SATA This has been working since 5.3 or 5.4 for me (at least that's when I bought it). I don't use its RAID capabilities either, I only needed the SATA ports; and it was cheap. Daniel -- LÉVAI Dániel PGP key ID

Re: SIL3114 SATA RAID controller

it was 5.1 :) Yes, after those precautions [1] (disabled onboard IDE, IRQ settings) it has been running since! Daniel [1] - http://marc.info/?l=openbsd-miscm=134138512202896w=2 -- LÉVAI Dániel PGP key ID = 0x83B63A8F Key fingerprint = DBEC C66B A47A DFA2 792D 650C C69B BE4C 83B6 3A8F

Re: SIL3114 SATA RAID controller

On p, szept 12, 2014 at 20:58:42 +0200, LÉVAI Dániel wrote: On p, szept 12, 2014 at 20:47:01 +0200, Robert wrote: [...] Hi Daniel, regarding this old threat: http://marc.info/?l=openbsd-miscm=134095569417063 Does your card still show DMA errors with 5.5 or current? I'm still

HP desktop pc network card not recognized

Hi! I got a HP dx7500 desktop PC for testing, and I'm struggling with the network card on OpenBSD -current. Linux's lspci reports it as Intel Corporation 82567V-2 Gigabit Network Connection. Also its dmesg says eth0: (PCI Express:2.5GB/s:Width x1) eth0: Intel(R) PRO/1000 Network Connection Is

pppoe server

Hi! I wish to experiment setting up a PPPoE server (AC) on OpenBSD 4.4. Although I've read the pppoe(8) man page and googled around, it is not clear for me how to set up such configuration. If one could point me to some docs and howtos, especially if it could be done using the kernel ppp

Re: Apache PHP

On Sunday 08 March 2009 08.13.58 you wrote: I compile some c code and link it statically. It's the simple 'hello world' program. I name it 'hello' and put it in /var/www/test/ I then try to execute it through php using the shell_exec function like so: $output =

OpenSSL rsa key to use with OpenSSH

Hi! I was wondering if I could get away with using my already working OpenSSL private/public key pair with OpenSSH, so I wouldn't need to create a new one with ssh-keygen (yes, this is just for plain convenience :). But unfortunately I can't get it to work. I've created a public key from my

ftpd(8) is not logging

Hi! I'm using OpenBSD's ftpd(8), and specified the -l option on the command line when starting it, which according to the man page, makes ftpd(8) to log to syslog with facility LOG_FTP. Well, I've set up syslog.conf to capture that facility to a file: LOG_FTP.* /var/log/ftpd After a `pkill

Re: ftpd(8) is not logging

On Friday 28 November 2008 11.26.55 you wrote: On 2008-11-28, LIVAI Daniel [EMAIL PROTECTED] wrote: Hi! I'm using OpenBSD's ftpd(8), and specified the -l option on the command line when starting it, which according to the man page, makes ftpd(8) to log to syslog with facility LOG_FTP.

patch for ftpd(8) - option to specify port on command line

Hi! This [1] is a simple diff to ftpd.c. It adds an optional parameter -p. One can specify a port number with -p, and then ftpd(8) will listen on this port instead of the default (which gets looked up from /etc/services). Man page updated too. Would someone look at it, it works fine here.

Re: internal-sftp and umask

On Wednesday 26 November 2008 14.39.08 you wrote: Hi! I have a setup: OpenBSD 4.4 /etc/ssh/sshd_config: [..] Match Group sftponly ChrootDirectory %h ForceCommand internal-sftp PasswordAuthentication yes But, after login I need to set the umask for the

internal-sftp and umask

Hi! I have a setup: OpenBSD 4.4 /etc/ssh/sshd_config: [..] Match Group sftponly ChrootDirectory %h ForceCommand internal-sftp PasswordAuthentication yes But, after login I need to set the umask for the session. I can not use .ssh/rc because of ForceCommand, and I can

Re: PF + ATLQ on openbsd 4.4

On Monday 24 November 2008 17.24.04 you wrote: Hi, I'm trying to set up a simple packet queueing policy on openbsd 4.4. These are the PF rules I set up : ~# grep -v \# /etc/pf.conf | grep -v ^$ altq on em1 cbq bandwidth 100Mb queue { ftp,other } queue ftp on em1 bandwidth 1Mb

tar(1) bug?

Hi! $ uname -mrsv OpenBSD 4.4 GENERIC#0 i386 $ pwd /home/daniell $ tar -C / -cvf test.tar ./home/daniell/.ksh* tar: Unable to access ./home/daniell/.ksh*: No such file or directory tar: WARNING! These file names were not selected: ./home/daniell/.ksh* $ ls -l /home/daniell/.ksh* -rw-r- 1

Re: tar(1) bug?

LIVAI Daniel wrote: $ tar -C / -cvf test.tar ./home/daniell/.ksh* tar: Unable to access ./home/daniell/.ksh*: No such file or directory tar: WARNING! These file names were not selected: ./home/daniell/.ksh* $ ls -l /home/daniell/.ksh* -rw-r- 1 daniell daniell [...]

Re: tar(1) bug?

Andris wrote: On Wed, Nov 19, 2008 at 10:06 AM, Andris [EMAIL PROTECTED] wrote: If you are at /home/daniell, the tar tries to find the files at /home/daniell/home/daniell. Try: tar -C / -cvf test.tar ./daniell/.ksh* Sorry, try this: tar -C / -cvf test.tar .ksh* According to man 1 tar: -C

Re: tar(1) bug?

On Wednesday 19 November 2008 14.33.11 Hannah Schroeter wrote: Hi! On Wed, Nov 19, 2008 at 01:55:02PM +0100, LIVAI Daniel wrote: $ uname -mrsv OpenBSD 4.4 GENERIC#0 i386 $ pwd /home/daniell $ tar -C / -cvf test.tar ./home/daniell/.ksh* tar: Unable to access ./home/daniell/.ksh*: No such

/bin/ksh file completion bug

Hi! Can anyone else see this behaviour? I could reproduce it on two different OS: $ mkdir asd[fgh]jkl $ mkdir asd[fg]hjkl $ cd asd -- now press the completion key, in my case TAB $ cd asd\[fg -- ksh completed the name partially, so I add another character to narrow my options to exactly

Re: Intel D201GLY2 install failure, OpenBSD 4.4

On Thursday 06 November 2008 22.24.49 Ted Unangst wrote: On Thu, Nov 6, 2008 at 11:49 AM, Jamie Cuesta [EMAIL PROTECTED] wrote: I was hoping to include a dmesg via serial port capture (my box does not include a floppy), but Use ftp. On Friday 07 November 2008 17.24.52 Ted Unangst wrote:

4.3 crashed, but don't know why

Hi! This morning there was a ~short outage on my system, and I didn't know why. I thought that maybe the UPS again... But then suddenly, it came back online again after a minute or so. I realized only when watching last(1)'s output, that it has crashed. $ last -20 [...] reboot~

Re: newer net-snmp ports are not working with mrtg anymore

Stuart Henderson wrote: On 2008/09/22 02:36, Stuart Henderson wrote: seems to work on sparc64, amd64, arm. any i386 testers around? compiling now. Thanks! Daniel -- LEVAI Daniel PGP key ID = 0x4AC0A4B1 Key fingerprint = D037 03B9 C12D D338 4412 2D83 1373 917A 4AC0 A4B1

making man(1) to open a file

Hi! I think there is a way for this but I can not find it in man's man :) Like in Linux there is a `-l' option to man(1) which opens a Local file, like man -l /usr/local/man/man1/somemanpage.1. I'm in trouble opening net-snmp package's snmpd(8) or snmpd.conf(5) man page, because it conflicts

Re: making man(1) to open a file

On Sunday 21 September 2008 21.51.48 Hannah Schroeter wrote: No, but in your case, you can use the option -M /usr/local/man (or -m /usr/local/man) probably. On Sunday 21 September 2008 21.45.59 Stuart Henderson wrote: man -M /usr/local/man snmpd Argh, thanks, thanks! Sorry, I knew I read it

Re: Call for testing - uvideo(4)

Hi! I wish to test this, but I need some assistance. If someone would be kind enough to provide me a way to test this without actually installing OpenBSD on my notebook, that would be great. I can't use it yet, because it doesn't support my network card (Marvell 88E8071 PCI-E Gigabit) and I

Re: Intel D201GLY2 and OpenBSD 4.3

On Sunday 25 May 2008 05.28.41 Sergey Aikinkulov wrote: Hi, After upgrade to OpenBSD 4.3 from 4.2 my Intel D201GLY2 based gateway go to reboot on kernel initializing. Intel D201GLY2 bios was upgrated to latest but problem was not fixed. Any ideas? Just a confirm. Exactly the same here,

Re: Time for OBSD everywhere?

On 2008. May 16. 11:59:33 Tim Post wrote: On Fri, 2008-05-16 at 10:21 +0100, Tomas Bodzar wrote: http://blog.wired.com/defense/2008/05/air-force-mater.html That reminds me of a story where investigators were stumped for 3 months trying to get data off a 1541 5.25 drive connected to a

Re: BSD authentication username rewrite

On Monday 12 May 2008 10.09.19 you wrote: hi, I have an imap server (dovecot) that can auhenticate using BSD authentication. however, when imap server requests authenitcation for user xyzzy, I'd like the bsd authentication layer to authenticate user 'xyzzy/mail' (which has a separate

Re: BSD authentication username rewrite

On Monday 12 May 2008 12.01.29 you wrote: On 12 maj 2008, at 11.43, LIVAI Daniel wrote: Just simply out of curiosity; why don't you use dovecot with virtual users in plain text passwd-file style, or even sql/ldap? 'cause the users are provisioned using kerberos. jakob Could this be

Re: marvell yukon GigE freezes the bootup

On Wednesday 06 February 2008 18:35:01 you wrote: On Wednesday 06 February 2008 18:02:58 you wrote: On Wednesday 06 February 2008 17:57:00 you wrote: A first start would be to tell us what version of OpenBSD you are running, and to send a full dmesg. If you are not running -current,

  1   2   >