Hi,
I had a silimar issue on a Lenovo V130.
For this machine I needed to remove the amdgpu driver in the kernel.
See also:
https://marc.info/?l=openbsd-misc=160232897421774=2
https://marc.info/?l=openbsd-tech=160383074317608=2
Do you get the error "entry point at 0x1001000" also with the
On 1/3/24 12:17, Stuart Henderson wrote:
On 2024-01-03, Kenneth Hendrickson wrote:
Is there any newer information than this:
https://OpenBsdMailBox.blogspot.com/2023/05/protectli-vp2420-with-dasharo.html
That is exactly how a boot looks if you are on a device with serial console
and don't
On 12/28/23 12:30, Michael Hekeler wrote:
I try to install OpenBSD on netcup ARM, too...
I disabled the pluart driver in the ramdisk kernel (on a other machine with
config -e -f /bsd.rd and copied the ramdisk kernel over to the nectup
server) and got access the the installation script.
I also can recommend openbsd.amsterdam :)
My OpenBSD VM at netcup.de (KVM) also runs without any issues for over year
On 4/18/22 00:00, Alexis wrote:
Mihai Popescu writes:
It lowers my confidence in Vultr as a reliable OpenBSD host.
Very well, it will match the confidence of running
Original location caused the line to be printed every time for ec keys.
I suspect copy error from rsa_key_create.
---
usr.sbin/acme-client/key.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/usr.sbin/acme-client/key.c b/usr.sbin/acme-client/key.c
index
On 2/3/22 21:33, Sergey Andrianov wrote:
Yes, it did not help. Just noticed that in README for xf86-video-intel
it's written:
PineView-M (Atom N400 series)
but mine is N570.
The N455 and N570 should have the same 3150 GFX, see
On 2/3/22 17:59, Sergey Andrianov wrote:
[ 1833.653] (--) Using wscons driver on /dev/ttyC4
[ 1833.671] (WW) checkDevMem: failed to open /dev/xf86 and /dev/mem
(Permission denied)
Check that you have set 'machdep.allowaperture=1'
in /etc/sysctl.conf and reboot your machine
refer to xf86(4)
On 11/24/21 19:06, Allan Streib wrote:
Recently a 4K monitor became available at work, it appears to support
3840x2160 at 60Hz only. My video card (ATI Radeon HD 5870) will do that
but only at 30Hz. Anyone know of a supported card that will do 3840x2160
60Hz on DisplayPort?
Allan
I've a
Hi list,
I've attached an XBOX 360 controller to my system.
The controller gets detected as:
usbdev:
addr 02: 045e:028e \M-)Microsoft Corporation, Controller
dmesg:
uhidev1 at uhub1 port 1 configuration 1 interface 0 "\M-)Microsoft
Corporation Controller" rev 2.00/1.14 addr 2
ugen1
vious default.
You can also fiddle with the X resources (~/.Xresources ) to fix
font sizes in invidual applications."
Sven
On 11/12/21 5:16 PM, Sven Wolf wrote:
Hi list,
I've upgraded three computers to the current snapshot
OpenBSD 7.0-current (GENERIC.MP) #90: Thu Nov 11 22:43:05 MST 2021
Hi list,
I've upgraded three computers to the current snapshot
OpenBSD 7.0-current (GENERIC.MP) #90: Thu Nov 11 22:43:05 MST 2021
I use i3 as window manager.
On my Intel based systems the dpi changed
X230 (inteldrm,i5-3320/HD4000) from 96 to 125
L14 (inteldrm,i5-10210U/UHD) from 96 to 157
On
Use of only CN is not allowed according to Baseline Requirements 1.8.0
from CA Browser Forum. Using CN is not prohibited, but if it is present,
value in it must also be present in SAN. And SAN is always required.
While currently Let's Encrypt does accept requests without CN, in the
interest of
Greetings,
I'm trying to use macros in my acme-client.conf, but it seems I cannot
get the syntax right. In addition to that, even when I try the example
from the acme-client.conf(5):
api_url="https://acme-v02.api.letsencrypt.org/directory;
authority letsencrypt {
api url $api_url
:04 PM, Sven Wolf wrote:
Hi,
on my x230 the rsync over ssh speed is extremly slow - about 700 kB/s
over wireless. I don't see a performance issue on the source and target
systems. When I reboot to Linux the speed is acceptable - about 12 mB/s
over wireless.
The compression an ciphers parameters
Hi,
on my x230 the rsync over ssh speed is extremly slow - about 700 kB/s
over wireless. I don't see a performance issue on the source and target
systems. When I reboot to Linux the speed is acceptable - about 12 mB/s
over wireless.
The compression an ciphers parameters don't have impact to
Hi,
the guys at corellium can boot the Linux kernel and also Ubuntu Linux on
a arm based mac mini. Some details can be found at:
https://corellium.com/blog/linux-m1
https://github.com/corellium
https://asahilinux.org/
Some details sound strange:
"...If that wasn't enough, Apple designed
Hello,
On 2021-01-09 22:20:26 +, Stuart Henderson wrote:
> On 2021-01-09, Wolf wrote:
> > I have small suggestion for improving man page for acme-client.conf.5.
> > Basically just adding "comma separated" to clarify on the format of the
> > list for
Hello,
I have small suggestion for improving man page for acme-client.conf.5.
Basically just adding "comma separated" to clarify on the format of the
list for alternative names. I had to dig into the parser.y to figure
this out, so it would be nice to have it documented.
diff --git
Hi,
thanks to the fix from Mark, see
https://marc.info/?l=openbsd-tech=160383074317608=2 the problem is
solved for my machine.
Best regards,
Sven
On 10/10/20 11:56 AM, Sven Wolf wrote:
Hi,
on my Lenovo V130 I've to build a custom kernel without radeondrm and
amdgpu.
https://marc.info
Hi Fabian,
the today posted patch from Marc Kettenis works on my system -
https://marc.info/?l=openbsd-tech=160383074317608=2
For test purposes you can download my build BOOTX64.EFI from
http://mailinglist.fusion-zone.net/BOOTX64.EFI
Just replace it in your EFI partition. Please make a
Hi Mark,
on my Lenovo V130 the patch works. Now I'm able to boot the current
kernel again, without the need to remove the radeon and amdgpu driver
(https://marc.info/?l=openbsd-misc=159276382718317=2)
Thanks and best regards,
Sven
On 10/27/20 1:40 PM, Mark Kettenis wrote:
Hi Kastus,
Hi,
on my Lenovo V130 I've to build a custom kernel without radeondrm and
amdgpu.
https://marc.info/?l=openbsd-misc=159276382718317=2
The modified efiboot.c, see
https://marc.info/?l=openbsd-misc=159401011632149=2, doesnt work on
this machine.
Best regards,
Sven
On 10/9/20 9:32 PM,
Hi guys,
with the patch the kernel loads and doesn't stop at "entry point at
0x1001000". But the kernel stops with a "Stopped at
gfx_v9_0_wait_reg_mem+0x307: int $3"
So for my machine the patch is the right direction but not the solution
:( I've tried the boot with the current snapshot
0+...
The kernel boots successfully
Default 6.7 MP kernel
booting sr0a:bsd: 12952904+2753544+331808+0+...
and also my custom kernel without radeondrm und amdgpu
booting sr0a:bsd: 10409288+2253840+306784+0+...
Thanks and best regards,
Sven
On 6/24/20 6:02 PM, Sven Wolf wrote:
Hi,
I did some more
don't have an Elitebook to
test with?
As a workaround, mount the efi partition and copy in boot64.efi from
6.6.
-Matt Kunkel
June 23, 2020 2:16 PM, "Sven Wolf" wrote:
Hi,
also after the new installation of the current snapshot the system stops with
"entry point at
0x1
Hi,
also after the new installation of the current snapshot the system stops
with "entry point at 0x1001000".
It's interesting, that a installation via bsd.rd is possible. But after
that the system doesn't boot via bsd.mp/bsd.sp.
Best regards,
Sven
On 6/21/20 8:55 PM, Sven Wolf
kernel.
Best regards,
Sven
On 6/21/20 8:33 PM, Sven Wolf wrote:
Hi,
I found the same issue in a thread some weeks ago.
https://marc.info/?l=openbsd-misc=159039904132502=2
I'll test an reinstall/older loader. Boot from mbr isn't an option :(
Best regards,
Sven
On 6/21/20 8:20 PM, Sven Wolf wrote
Hi,
I found the same issue in a thread some weeks ago.
https://marc.info/?l=openbsd-misc=159039904132502=2
I'll test an reinstall/older loader. Boot from mbr isn't an option :(
Best regards,
Sven
On 6/21/20 8:20 PM, Sven Wolf wrote:
Hi,
I've upgraded my Lenovo V130 from snapshot 6.6 (April
Hi,
I've upgraded my Lenovo V130 from snapshot 6.6 (April 2020) to the
snapshot from 2020-06-20. The boot via boot.rd is always possible.
But when I load bsd.sp or bsd.rd the boot process stops with the error
"entry point 0x1001000". Do you have an idea how I can fix this error?
In the past I
vertheless, maybe it's useful for further discussion.
Thanks a lot for your time,
--
Wolf
>From b87031f89bdbdaff956e307cc18dd3aa3b95aca3 Mon Sep 17 00:00:00 2001
From: Wynn Wolf Arbor
Date: Wed, 18 Mar 2020 19:47:54 +0100
Subject: [PATCH 1/3] Fix string truncation in menu_draw
The previous siz
Hi Peter,
thanks for your information.
Everything is fine now :)
Thanks,
Sven
On 03/19/18 12:43, Peter N. M. Hansteen wrote:
On Mon, Mar 19, 2018 at 12:34:43PM +0100, Sven Wolf wrote:
I've updated my system to the latest amd64 snapshot. When I run a system
updade from bsd.rd and pkg_add
Hi,
I've updated my system to the latest amd64 snapshot. When I run a system
updade from bsd.rd and pkg_add then it points to /pub/OpenBSD/6.3/
instead to /pub/OpenBSD/snapshots/.
The problem occurs in my opinion since last friday. Is there something
which I can fix on my machine? Or is
possibility to tell pf to
LOCAL-HOST. I have search with google but no relevant articles found, maybe I
have not asked correct.
Thank you very much for any idea.
Regards,
Robert Wolf.
) port rdr-to 127.0.0.1 port 22
block in quick proto tcp from ! OurNetwork to (self) port 22 no state
pass flags any no state
==
Is this better?
Thank you all for your answers.
Regards,
Robert Wolf.
no
state label From main to PolicyIn-LAN of PolicyIn
-
Thank you very much for you answers.
Regards,
Robert Wolf
Hello
The Lemote Netbook is great, got mine some month ago. And the progress
of OpenBSD development for it is impressive (as usual). The only
disadvantage are the graphical browsers wich keep crashing. But links -g
works for most stuff.
Greetings and thanks to the developers
Wolf
On 05/19
The official registrar is Switch (http://switch.ch/) a foundation to
provide internet services to swiss universities. They have quite a good
reputation.
Regards
Wolf
On 12/08/10 17:03, Brad Tilley wrote:
Can anyone recommend good/reputable domain name registrars in
Switzerland to buy .ch
http://pubwww.hsz-t.ch/~wstettle/
Martin Toft wrote:
http://pics.martintoft.dk/Events/OpenBSD%204.7%2020100508/dscn2548.jpg
:-D
Hello,
I've successfully installed OpenBSD -current on a Asus EEE Box 202.
There are some minor issues:
- only the bsd.rd and bsd.mp kernel boots the system, bsd just stops at
entry point 0x200120
- re0 detected wrong media options (10BaseT), so I set it manually to
100basetx full-duplex
I
at 10:26:26PM +0200, Sven Wolf wrote:
Hi,
I've successfully installed -current on a ASUS EEEPC 1000H (via an usb
stick).
At the moment lii doesn't detect the wired lan adapter: Attansic
Technology L1E rev 0xb0 but maybe there will be a patch in the future...
For the LAN connection I've used
as written on [EMAIL PROTECTED]
the solution is Either wait, or build from ports. Currently I build my
own packages from the ports. Because the offical snapshot packages
haven't been updated since august.
Best regards,
Sven
Stanislaus Hoppe wrote:
Hello,
I've tried to install the bash
Hi,
I've successfully installed -current on a ASUS EEEPC 1000H (via an usb
stick).
At the moment lii doesn't detect the wired lan adapter: Attansic
Technology L1E rev 0xb0 but maybe there will be a patch in the future...
For the LAN connection I've used an USB adapter: axe0 at uhub0 port 2
Hi,
I say thank you to all developers for the great operating system. With
xorg 7.2 (xenocara) now I can use my nvidia 7600 gs on my 1680x1050
widescreen without any problems.
Best regards,
Sven
Theo de Raadt wrote:
Nov 1, 2006.
We are pleased to announce the official release of OpenBSD 4.0.
This is our 20th release on CD-ROM (and 21st via FTP). We remain
proud of OpenBSD's record of ten years with only a single
Oops, maybe something went wrong at my last post :(
Here is the missing wd0 line:
wd0 at pciide0 channel 0 drive 0: ExcelStor Technology J360
Stuart Henderson wrote:
On 2006/09/21 22:50, Sven Wolf wrote:
wd0 at pciide0 channel 0 drive 0:
^
haven't
Hi Gilles,
I've switched my Strato Power Server (dedicated server -
http://www.strato.de/server/power/index.html) from Linux to OpenBSD 3.9.
For more information read: http://www.dettus.net/openbsd_at_strato.txt
And here is the dmesg of my Power Server:
OpenBSD 3.9 (GENERIC) #617: Thu Mar
z0mbix wrote:
On 2/2/06, Kenny Mann [EMAIL PROTECTED] wrote:
I'm looking for something that which I can slap OpenBSD 3.8 on and use
it as a router.
This will be used for a house (~ 4 people) and I'm looking for something
small in form factor and that which doesn't run hot because it will
Hello,
I've a server at the German hoster Strato and I try to install OpenBSD
3.8 on this machine. But I always get a device timeout of the Intel Nic
(because of a wrong irq assignment?) :(
Here is the dmesg output:
OpenBSD 3.8 (RAMDISK) #9: Tue Jan 17 18:24:51 CET 2006
[EMAIL
48 matches
Mail list logo
