variations which can be
: either ural, rum or zyd. The manufacturer didn't even have the common
: courtesy of changing the model number.
:
fuck! Now i must search another different hardware
Thanks to all,
--
ip
On 9/25/06, ip [EMAIL PROTECTED] wrote:
I'm thinking to buy the Belink F5D7050USB 2.0 802.11b/g adapter,
listed in i386 hardware list.
Chipset Ralink RT2500 - ural driver.
And I hope it working in g mode...
Cheers,
--
ip
Argh.. I have bought it...but when I have inserted it, the message
v2000?
From dmesg I look:
ugen0: Belkin USB2.0 WLAN, rev 2.00/48.10, addr 2
so, I think to have the revision 2000...or 4810 (looking also usbdev) ?!
Which is my situation ?
Thanks for the tips,
--
ip
, on the box is reported only the F5D7050 model...and
it's not more enough for a correct choice...i'm frustrated :(
--
ip
: ar5k_ar5212_nic_wakeup: failed to
resume the AR5212 (again)
Sep 25 13:07:34 vapordrago /bsd: ath0: unable to reset hardware; hal status 2
How can I resolve ?
Thanks,
best regards
--
ip
I'm thinking to buy the Belink F5D7050USB 2.0 802.11b/g adapter,
listed in i386 hardware list.
Chipset Ralink RT2500 - ural driver.
And I hope it working in g mode...
Cheers,
--
ip
I have resolved configuring the printer in raw mode...and reading
carefully the official samba how-to: Classical Printing, and CUPS
Printing
;-)
-- Forwarded message --
From: ip [EMAIL PROTECTED]
Date: May 30, 2006 5:06 PM
Subject: Help with CUPS and Samsung ML-1710
To: misc
(pid=28339)
and also when I search to bypass the spooler mechanism,
# lptest /dev/ulpt0
it doesn't print :(
I hope in your help :)
Thanks,
--
ip
and the kernel config file options are:
# GENERIC.RAID
include arch/i386/conf/GENERIC
option RAID_AUTOCONFIG
pseudo-device raid 4
However, this week I will re-start from zero and I'll write you,
thanks ;-)
ip
mode, the error messages seem
to indicate that the Auto RAID system has not been activated.
Infact I have fixed dev/console and other mechanisms, but this
solution go to recreate a minimum complete installation into wd1a...
Help :\
--
ip
BIOS drive 0x80
dkcsum wd1 matches BIOS drive 0x81
root on wd1a
rootdev=0x10 rrootdev=0x320 rawdev=0x312
warning: /dev/console does not exist
init: not found
panic: no init
...
ddb
Well, where I have make a mistake ?
Thanks in andvance and sorry for the english...
--
ip
11 matches
Mail list logo