Currently using a zoom x4 modem in half bridge mode with 3.6 stable and
haven't had any problems with dhclient obtaining a lease from the modem
so maybe it's a 3.7 thing?.
I'm just about to move to 3.7 current so this is worthwhile knowing.
Many thanks.
Nathan Gould wrote:
Just for interest,
Just for interest, I've set this up successfully using a Zoom X4 (about #45)
using half bridge but originally ran into problems getting the OBSD box to
collect the address via DHCP on the external interface when in this mode (no
such
problems without half-bridge).
Eventually, narrowed it
On Saturday 27 August 2005 16:36, Simon Morgan wrote:
On 8/27/05, poncenby [EMAIL PROTECTED] wrote:
i've been using an Alcatel Speedtouch usb modem with openbsd 3.7 with no
problems. take a look...http://www.speedtouchdsl.com/prod330.htm
How stable has it been?
I use the same modem on a
On 8/15/05, Simon Morgan [EMAIL PROTECTED] wrote:
Does anyone have any suggestions? Any advice is welcome.
To anyone who might be reading this in the future (Hi! Do you have robots
and flying cars yet?), I've given up looking for a native solution. The
state of ADSL hardware support under BSD
On 8/27/05, Simon Morgan [EMAIL PROTECTED] wrote:
On 8/15/05, Simon Morgan [EMAIL PROTECTED] wrote:
Does anyone have any suggestions? Any advice is welcome.
To anyone who might be reading this in the future (Hi! Do you have robots
and flying cars yet?), I've given up looking for a native
On 8/27/05, poncenby [EMAIL PROTECTED] wrote:
i've been using an Alcatel Speedtouch usb modem with openbsd 3.7 with no
problems. take a look...http://www.speedtouchdsl.com/prod330.htm
How stable has it been?
i have a few documents which explains how to get it working, if you want
them mail
Simon Morgan wrote:
On 8/15/05, Simon Morgan [EMAIL PROTECTED] wrote:
Does anyone have any suggestions? Any advice is welcome.
To anyone who might be reading this in the future (Hi! Do you have robots
and flying cars yet?), I've given up looking for a native solution. The
state of ADSL
Hi Jared,
On 25/08/2005, at 1:55 PM, jared r r spiegel wrote:
the thread has kinda gone this way already, but i believe the only
way you can get true i don't have NAT on PPPoA, outside of
getting a
business class service plan (or anything else with static IP WAN
and LAN allocations)
On Thu, 25 Aug 2005 15:28:36 +1000, Shane J Pearson wrote:
Hi Jared,
On 25/08/2005, at 1:55 PM, jared r r spiegel wrote:
the thread has kinda gone this way already, but i believe the only
way you can get true i don't have NAT on PPPoA, outside of
getting a
business class service
On Tue, Aug 16, 2005 at 01:54:46AM -0700, J.C. Roberts wrote:
On Tue, 16 Aug 2005 08:20:33 +0100, Simon Farnsworth
[EMAIL PROTECTED] wrote:
On Tuesday 16 August 2005 06:34, J.C. Roberts wrote:
You seem to be confused on your terms. The term PPPoA means
Point-to-Point Protocol over ATM
On Wed, Aug 24, 2005 at 09:55:50PM -0600, jared r r spiegel wrote:
take a phone cord coming in and an ethernet cord going out.
it's possible
i suppose
there could be a
please forget this train of thought.
it may be possible to use OpenBSD as a
*replacement* for the DSL
On 16/08/2005, at 6:54 PM, J.C. Roberts wrote:
Great info Simon, thank you. All the DSL modems I've seen here in the
USA are ethernet based on the user side and as misfortune would have
it, many providers *require* using their particular modem, so the user
side of it is all that matters. It's
On Mon, Aug 22, 2005 at 10:39:13AM +0100, [EMAIL PROTECTED] wrote:
You must now stand corrected :-)
In Britain (and probably the rest of Europe), that is precisely how ADSL is
done - with ATM (rather than PPPoE, which is how it's done in North America).
There are probably more ATM over
* Reyk Floeter [EMAIL PROTECTED] [2005-08-22 17:37]:
On Mon, Aug 22, 2005 at 10:39:13AM +0100, [EMAIL PROTECTED] wrote:
You must now stand corrected :-)
In Britain (and probably the rest of Europe), that is precisely how ADSL is
done - with ATM (rather than PPPoE, which is how it's done
Hi,
You beat me to the post. Unfortunately for me it doesn't support ADSL
over ISDN. I'm one of those poor souls that uses iDSL to connect to the
Big-I, to far away from the CO, then I could ditch my ancient iDSL
router.
you could give this one a try.
http://accoom.kd85.com/
iDSL is very
On Tuesday 16 August 2005 06:34, J.C. Roberts wrote:
You seem to be confused on your terms. The term PPPoA means
Point-to-Point Protocol over ATM (Asyncronous Transfer Mode). I
seriously doubt you're running ADSL over ATM. ;-)
Given that G.992 DSL protocols are all ATM physical layers, it's
On Tue, 16 Aug 2005 08:20:33 +0100, Simon Farnsworth
[EMAIL PROTECTED] wrote:
On Tuesday 16 August 2005 06:34, J.C. Roberts wrote:
You seem to be confused on your terms. The term PPPoA means
Point-to-Point Protocol over ATM (Asyncronous Transfer Mode). I
seriously doubt you're running ADSL
--On 16 August 2005 01:54 -0700, J.C. Roberts wrote:
Assuming you don't have a provider requirement of using their
specified DSL modem, it may be possible to use OpenBSD as a
*replacement* for the DSL modem itself. I know we've got some degree
of ATM support but I don't know how well (or if)
Another solution is to buy an ethernet modem that supports 'Half Bridge
Mode'. I have two such units, an ADSL Nation X-Modem and a Zoom X4.
When operating in half bridge the modem does all the PPPoA negotiation
with the DSL provider to login and obtain and IP address. Once done it
acts as a
J.C. Roberts wrote:
You seem to be confused on your terms. The term PPPoA means
Point-to-Point Protocol over ATM (Asyncronous Transfer Mode). I
seriously doubt you're running ADSL over ATM. ;-)
He could be right, in the UK PPPoE is very rare most providers instead
prefer to present their
On Tue, 16 Aug 2005, Stuart Henderson wrote:
--On 16 August 2005 01:54 -0700, J.C. Roberts wrote:
Assuming you don't have a provider requirement of using their
specified DSL modem, it may be possible to use OpenBSD as a
*replacement* for the DSL modem itself. I know we've got some degree
Stuart Henderson wrote:
--On 16 August 2005 16:49 +0100, Simon Slaytor wrote:
There's a nice little racket on ebay.co.uk at the moment with someone
selling 'Nortel E20B ethernet modems' and advertising them as
operating in RFC1483 bridge mode i.e. PPPoE which they do. The seller
does not
Hi,
I have a PPPoA ADSL connection and would like to use FreeBSD or OpenBSD
as a gateway/server and am looking for compatible hardware that would
facilitate this. I'm specifically looking to avoid combination modem
+ routers and NAT and port forwarding in particular. This will be
a pure routed IP
On Mon, 15 Aug 2005 23:18:19 +0100, Simon Morgan [EMAIL PROTECTED]
wrote:
Hi,
I have a PPPoA ADSL connection and would like to use FreeBSD or OpenBSD
as a gateway/server and am looking for compatible hardware that would
facilitate this. I'm specifically looking to avoid combination modem
+
24 matches
Mail list logo
