On 2018-02-28 11:18, Stefan Sperling wrote:
The x130e can boot in either UEFI or legacy mode.
I have 'UEFI/Legacy Boot' set to 'Both' and 'UEFI/Legacy Boot Priority'
set to 'Legacy First'.
Maybe this issue only happens with UEFI?
Yes, that does it. "Legacy First" resolves the problem.
On Wed, Feb 28, 2018 at 07:18:46PM +0100, Stefan Sperling wrote:
> On Wed, Feb 28, 2018 at 11:23:20AM -0500, Allan Streib wrote:
> > j...@bitminer.ca writes:
> >
> > > Just for laughs I booted an OpenBSD 4.2 CD, circa 1997 (and five years
> > > older than the hardware) and while it recognized
On Wed, Feb 28, 2018 at 11:23:20AM -0500, Allan Streib wrote:
> j...@bitminer.ca writes:
>
> > Just for laughs I booted an OpenBSD 4.2 CD, circa 1997 (and five years
> > older than the hardware) and while it recognized few devices it did show
> > all video correctly. The video device vga1
j...@bitminer.ca writes:
> Just for laughs I booted an OpenBSD 4.2 CD, circa 1997 (and five years
> older than the hardware) and while it recognized few devices it did show
> all video correctly. The video device vga1 shows as vendor "ATI"
> unknown product 0x9806 rev 0x00.
That release
On 2018-02-28 06:51, Stefan Sperling wrote:
On Tue, Feb 27, 2018 at 04:53:06PM -0700, j...@bitminer.ca wrote:
My x130e has no problems booting -current miniroot62.fs from USB.
Video works fine ("ATI Radeon HD 6310"). dmesg below.
Did you boot from OpenBSd powered-off state or soft
On Tue, Feb 27, 2018 at 04:53:06PM -0700, j...@bitminer.ca wrote:
> I am replacing my ancient X60 with an X130e of lesser age. This model is
> previously found as working on misc.
>
> When trying to install 6.2 (release) over Windows 10 there is no video to
> see.
>
> By booting miniroot62.fs
I am replacing my ancient X60 with an X130e of lesser age. This model
is previously found as working on misc.
When trying to install 6.2 (release) over Windows 10 there is no video
to see.
By booting miniroot62.fs from USB the kernel loads, but the "OpenBSD 6.2
" and subsequent boot
7 matches
Mail list logo
