Hello misc,
I Have a ethernet RTL8169SC based chipset and it work very well with OpenBSD
4.8, the same card not work with 4.9
The motherboard of 4.9 is Intel DP43BF
in attach dmesg.boot of 4.9
Regards,
[demime 1.01d removed an attachment of type application/octet-stream which had
a name of
Hi
The only mailing list that allows attachments is the _ports_ list,
they will be removed from messages on the other mailing lists.
http://www.openbsd.org/mail.html
you can upload your dmesg to pastebin and provide link in email.
On 14:53 Thu 07 Jul , R0me0 *** wrote:
Hello misc,
I Have a
Sorry,
The link of dmesg on pastebin : http://pastebin.com/fK9HSrfY
Regards,
2011/7/7 Sergey Bronnikov este...@gmail.com
Hi
The only mailing list that allows attachments is the _ports_ list,
they will be removed from messages on the other mailing lists.
http://www.openbsd.org/mail.html
On 07/07/2011 02:01 PM, Sergey Bronnikov wrote:
...
you can upload your dmesg to pastebin and provide link in email.
Just put it in-line.
Rule #1 of getting free help: don't make it annoying to the people
giving you the free help. I'm not going to third party sites for
something that
*Sorry about the direct response Nick. :0
These two lines make me think it's a configuration problem.
bge0 at pci7 dev 0 function 0 Broadcom BCM57788 rev 0x01, BCM57780
A1 (0x57780001): apic 0 int 17 (irq 10), address 00:22:4d:4c:40:ee
brgphy0 at bge0 phy 1: BCM57780 10/100/1000baseT PHY, rev. 1
Allright, I disabled bge0 on BIOS SETUP but the error continues:
pciide0 at pci2 dev 0 function 0 Marvell 88SE6101 IDE rev 0xb2: DMA
(unsupported), channel 0 configured to native-PCI, channel 1
configured to native-PCI
2011/7/7 Zeb Packard zeb.pack...@gmail.com
*Sorry about the direct
I booted OBSD 4.8 on this motherboard and I have the same error:
can be this error related with BUG as described on man page of re driver ?
Regards,
2011/7/7 R0me0 *** knight@gmail.com
Allright, I disabled bge0 on BIOS SETUP but the error continues:
pciide0 at pci2 dev 0 function 0
This machine does not have an re(4) chip in it. You need to use bge0
for your ethernet device.
On 2011 Jul 07 (Thu) at 11:39:20 -0700 (-0700), Zeb Packard wrote:
:*Sorry about the direct response Nick. :0
:
:These two lines make me think it's a configuration problem.
:
:bge0 at pci7 dev 0
On 07/07/2011 02:39 PM, Zeb Packard wrote:
*Sorry about the direct response Nick. :0
These two lines make me think it's a configuration problem.
bge0 at pci7 dev 0 function 0 Broadcom BCM57788 rev 0x01, BCM57780
A1 (0x57780001): apic 0 int 17 (irq 10), address 00:22:4d:4c:40:ee
brgphy0 at bge0
the ethernet that I'm plugging work very well on old hardware and work very
well ( OBSD 4.8 )
the same ethernet accurs this error: ( re(4) chip )
pciide0 at pci2 dev 0 function 0 Marvell 88SE6101 IDE rev 0xb2: DMA
:(unsupported), channel 0 configured to native-PCI, channel 1
:configured to
dmesg.boot of old hardware: ( same ethernet )
OpenBSD 4.8 (GENERIC.MP) #359: Mon Aug 16 09:16:26 MDT 2010
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz (GenuineIntel 686-class) 3.01 GHz
cpu0:
I'd like to see the output from ifconfig.
dmesg.boot of old hardware: ( same ethernet )
[...]
bios0 at mainbus0: AT/286+ BIOS, date 04/25/06, BIOS32 rev. 0 @ 0xfad90,
SMBIOS rev. 2.3 @ 0xf0100 (34 entries)
bios0: vendor Award Software International, Inc. version F3e DB date
04/25/2006
bios0: Gigabyte Technology Co., Ltd.
# uname -smr
OpenBSD 4.8 i386
# ifconfig
re0
re0: flags=8b43UP,BROADCAST,RUNNING,PROMISC,ALLMULTI,SIMPLEX,MULTICAST mtu
1500
lladdr 00:08:54:69:13:54
priority: 0
media: Ethernet 100baseTX full-duplex
status: active
inet 192.168.0.1 netmask 0xff00
That dmesg is about a year old, I'm leaning towards ESD damage.
Yes, the machine are different, I'm doing upgrade of hardware, I buy
tp-link model n. TG-3269 and have the same chipset and work very well on
this machine that have OBSD 4.8, but I tested the SAME ethernet that I'm
running on 4.8 in new hardware with 4.9
2011/7/7 Miod Vallat m...@online.fr
Other thing, I have others servers, that are running OBSD 4.8 with the same
ethernet model, and it work very well.
The ethernet is ENLGA-1320 ( encore electronics ) ( YES, is a generic
network card )
2011/7/7 R0me0 *** knight@gmail.com
Yes, the machine are different, I'm doing upgrade of
On 07/07/11 15:59, R0me0 *** wrote:
[...snip a whole lot of incomplete, fragmentary and wrong stuff...]
here's the scoop.
Realtek cards work. re(4) driver works. Got at least a couple, it's
not something I usually brag about, but here's one from 4.9:
re0 at pci3 dev 0 function 0 Realtek 8169
On Thu, Jul 7, 2011 at 12:53 PM, R0me0 *** knight@gmail.com wrote:
# uname -smr
OpenBSD 4.8 i386
# ifconfig
re0
re0: flags=8b43UP,BROADCAST,RUNNING,PROMISC,ALLMULTI,SIMPLEX,MULTICAST
mtu
1500
lladdr 00:08:54:69:13:54
priority: 0
media: Ethernet 100baseTX
19 matches
Mail list logo
