Re: pfctl: Cannot allocate memory and spamd-setup -bd

2010-06-23 Thread Ruy Bento
On 21-06-2010 22:44, Ruy Bento wrote: ... My question is: In this small env. (100 MB - RAM) I need to change the Kernel memory or other sysctl value, which one? Thank you for all your replys and comments. In 4.6 everything work perfect, so what happen 4.6 - 4.7, it need more mem? And if

Re: pfctl: Cannot allocate memory and spamd-setup -bd

2010-06-22 Thread Stuart Henderson
On 2010-06-21, Ruy Bento r...@madeira.dyndns.org wrote: spamd_black=YES # set to YES to run spamd without greylisting you don't want blacklist-only mode if you have limited RAM.

pfctl: Cannot allocate memory and spamd-setup -bd

2010-06-21 Thread Ruy Bento
spamlogd(8) /etc/mail/spamd.conf: with:china:korea: it's ok with:uatraps:china:korea: - pfctl: Cannot allocate memory. or :nixspam::china:korea: - pfctl: Cannot allocate memory. with the shell /usr/libexec/spamd-setup -bd vmstat -m

Re: pfctl: Cannot allocate memory and spamd-setup -bd

2010-06-21 Thread Theo de Raadt
avail mem = 87961600 (83MB) with:uatraps:china:korea: - pfctl: Cannot allocate memory. Not enough kernel memory.

Re: pfctl: Cannot allocate memory and spamd-setup -bd

2010-06-21 Thread Chris Bennett
interface and see spamlogd(8) /etc/mail/spamd.conf: with:china:korea: it's ok with:uatraps:china:korea: - pfctl: Cannot allocate memory. or :nixspam::china:korea: - pfctl: Cannot allocate memory. with the shell /usr/libexec/spamd-setup -bd vmstat -m

Re: pfctl: Cannot allocate memory and spamd-setup -bd

2010-06-21 Thread Theo de Raadt
OpenBSD 4.7 (GENERIC) #558: Wed Mar 17 20:46:15 MDT 2010 dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel Pentium II (GenuineIntel 686-class, 512KB L2 cache) 234MHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,MMX real mem = 100233216

Re: pfctl: Cannot allocate memory and spamd-setup -bd

2010-06-21 Thread Chris Bennett
Theo de Raadt wrote: OpenBSD 4.7 (GENERIC) #558: Wed Mar 17 20:46:15 MDT 2010 dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel Pentium II (GenuineIntel 686-class, 512KB L2 cache) 234MHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,MMX real mem =

Re: OpenBSD 3.9 - 4.3: pfctl Cannot allocate memory

2008-10-08 Thread Stuart Henderson
On 2008-10-07, Henning Brauer [EMAIL PROTECTED] wrote: * Christophe Rioux [EMAIL PROTECTED] [2008-10-07 13:15]: # pfctl -f pf.conf pfctl: failed to create table __automatic_e11ee055_282 in : Cannot allocate memory so the ruleset optiomizer optimized a large list of addresses into a table

Re: OpenBSD 3.9 - 4.3: pfctl Cannot allocate memory

2008-10-07 Thread Stuart Henderson
On 2008-10-07, Christophe Rioux [EMAIL PROTECTED] wrote: # pfctl -f pf.conf pfctl: failed to create table __automatic_e11ee055_282 in : Cannot allocate memory pfctl in free(): error: chunk is already free Abort trap (core dumped) that's a PF ruleset optimizer bug. I think it was fixed after

Re: OpenBSD 3.9 - 4.3: pfctl Cannot allocate memory

2008-10-07 Thread Henning Brauer
ok, we have multiple issues here. * Christophe Rioux [EMAIL PROTECTED] [2008-10-07 13:15]: NameSize Requests Fail Releases Pgreq Pgrel Npage Hiwat Minpg Maxpg Idle ... pfrktable 1240 54345 4434 334 0 334 334 0 334 0 ... The rest seems to be OK. the 5

Re: OpenBSD 3.9 - 4.3: pfctl Cannot allocate memory

2008-10-07 Thread Christophe Rioux
PROTECTED] De la part de Christophe Rioux Envoyi : mardi 16 septembre 2008 17:33 @ : misc@openbsd.org Objet : OpenBSD 3.9 - 4.3: pfctl Cannot allocate memory Hi, During a manual migration (installation with 4.3 CD, and renew the configuration manually), I get this error message: # pfctl -f

Re: OpenBSD 3.9 - 4.3: pfctl Cannot allocate memory

2008-10-07 Thread Henning Brauer
* Stuart Henderson [EMAIL PROTECTED] [2008-10-07 15:16]: On 2008-10-07, Christophe Rioux [EMAIL PROTECTED] wrote: # pfctl -f pf.conf pfctl: failed to create table __automatic_e11ee055_282 in : Cannot allocate memory pfctl in free(): error: chunk is already free Abort trap (core

Re: OpenBSD 3.9 - 4.3: pfctl Cannot allocate memory

2008-10-07 Thread Christophe Rioux
The workaround work fine ... thanks -Message d'origine- De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] De la part de Stuart Henderson Envoyi : mardi 7 octobre 2008 15:10 @ : misc@openbsd.org Objet : Re: OpenBSD 3.9 - 4.3: pfctl Cannot allocate memory On 2008-10-07, Christophe

Re: OpenBSD 3.9 - 4.3: pfctl Cannot allocate memory

2008-10-07 Thread Theo de Raadt
PROTECTED] De la part de Stuart Henderson Envoyi : mardi 7 octobre 2008 15:10 @ : misc@openbsd.org Objet : Re: OpenBSD 3.9 - 4.3: pfctl Cannot allocate memory On 2008-10-07, Christophe Rioux [EMAIL PROTECTED] wrote: # pfctl -f pf.conf pfctl: failed to create table

Re: OpenBSD 3.9 - 4.3: pfctl Cannot allocate memory

2008-10-07 Thread Stuart Henderson
Cannot allocate memory On 2008-10-07, Christophe Rioux [EMAIL PROTECTED] wrote: # pfctl -f pf.conf pfctl: failed to create table __automatic_e11ee055_282 in : Cannot allocate memory pfctl in free(): error: chunk is already free Abort trap (core dumped) that's a PF ruleset

OpenBSD 3.9 - 4.3: pfctl Cannot allocate memory

2008-09-16 Thread Christophe Rioux
Hi, During a manual migration (installation with 4.3 CD, and renew the configuration manually), I get this error message: # pfctl -f pf.conf pfctl: failed to create table __automatic_e11ee055_282 in : Cannot allocate memory pfctl in free(): error: chunk is already free Abort trap (core dumped)

Re: OpenBSD 3.9 - 4.3: pfctl Cannot allocate memory

2008-09-16 Thread Bryan Vyhmeister
As you can read from the first lines of the upgrade guides, Upgrades are only supported from one release to the release immediately following it. Do not skip releases. It is very likely that this is the cause of your problems. http://www.openbsd.org/faq/upgrade43.html Bryan

pfctl: Cannot allocate memory. [yes, i have set limit table-entries ]

2008-02-28 Thread Juan Miscaro
I had a 4.0 system where this was happening all the time. Back then, everyone said to update to 4.1!. Well now I'm running 4.2 (stable) and it's happening all over again. I reduced my blacklists from nixspam:uatraps:china:korea to just uatraps:china:korea and it's still happening. This is

Note on pfctl: cannot allocate memory from spamd-setup

2007-12-06 Thread Steve Shockley
I'm running spamd in blacklist mode, and it started running out of memory today. It turns out the lists are getting close to the default limit: # /usr/libexec/spamd-setup -b -d Getting http://www.openbsd.org/spamd/traplist.gz blacklist uatraps 157348 entries Getting

spamd-setup: pfctl: Cannot allocate memory

2007-06-07 Thread Soner Tari
entries Getting http://www.openbsd.org/spamd/traplist.gz blacklist uatraplist 45380 entries Getting http://www.openbsd.org/spamd/nixspam.gz blacklist nixspam 39983 entries # pfctl: Cannot allocate memory. I know that there's not much shared memory in my system (and it's a slow machine

pfctl Cannot allocate memory

2007-04-13 Thread Rimas Šliumba
I want to load about 5mln of IP addresses to pf table for spamd,and I get pfctl Cannot allocate memory. here is my sytem: /bsd: real mem = 1073061888 (1047912K) /bsd: avail mem = 972406784 (949616K) /bsd: using 4278 buffers containing 53755904 bytes (52496K) of memory When I load those IP

Re: pfctl Cannot allocate memory

2007-04-13 Thread Sebastian Benoit
I want to load about 5mln of IP addresses to pf table for spamd,and I get pfctl Cannot allocate memory. You have to increase the max number of table entries with set limit table-entries num in pf.conf. /B. -- Sebastian Benoit [EMAIL PROTECTED]

Re: pfctl Cannot allocate memory

2007-04-13 Thread Peichaer Robert
Sebastian Benoit wrote: I want to load about 5mln of IP addresses to pf table for spamd,and I get pfctl Cannot allocate memory. You have to increase the max number of table entries with set limit table-entries num in pf.conf. /B. Hi There's a hard-limit of the number of table

pfctl: Cannot allocate memory

2007-02-23 Thread M...
Follow-up. I googled previously and read a bunch of posts relating to 3.6, 3.7 3.8. More info. - all:\ :bobbeck1:white:spews1:white:china:white:korea:white: # Bob Beck's traplist mirrored at OpenBSD bobbeck1:\ :black:\ :msg=SPAM. Go forth and multiply

Re: pfctl: Cannot allocate memory

2007-02-23 Thread Florian Fuessl
] [mailto:[EMAIL PROTECTED] On Behalf Of M... Sent: Friday, February 23, 2007 2:12 PM To: misc@openbsd.org Subject: pfctl: Cannot allocate memory Hello. I've been running spamd with greylisting for a few weeks. Today, I am getting 'pfctl: Cannot allocate memory' notifications

pfctl cannot allocate memory for using spamd w/ Table for CBL

2005-12-01 Thread Paul Pruett
suggestions? since upgrading to openbsd 3.8 I noted my spamd was not blocking, looked closer and with me using the CBL table (huge) trying spamd-setup gave this response: pfctl Cannot allocate memory The spamd is loading okay so long as I don't use a whopper table like the CBL, rsync

Re: pfctl: Cannot allocate memory.

2005-09-11 Thread Lukasz Sztachanski
.. 'pfctl: Cannot allocate memory.' google tells me, that this issue is quite well discused; after all you can try to split this file into smaller chunks. -- Lukasz Sztachanski ...proud user of C8H10N4O2 :) http://szati.blogspot.com

pfctl: Cannot allocate memory.

2005-09-10 Thread Mike Spenard
Openbsd 3.7 Memory: Real: 16M/33M act/tot Free: 55M Swap: 0K/512M used/tot Trying to load a table from a file that is 21megs and pfctl -t spamd -Tr -f file.txt is outputting.. 'pfctl: Cannot allocate memory.' -mike