Just found that my previous analysis was flawed. The problem is not
related to the length of the patch cable. lii(4) comes up correctly if
the eeePC is connected to the switch at the time when the eeePC is
powered on. However, if the eeePC is not plugged in to the switch at
powerup, then there
Hello list,
I have a problem with an IPsec peer. My OpenBSD 4.1 responder (obsd in
the tcpdump below) doesn't reply to pings in the tunnel. The initiator
is an OpenBSD 4.1 appliance (not GENERIC kernel, but I don't think
that's the problem). There are two NATed hosts behind the peer-gw,
On Mon, May 19, 2008 at 03:06:21PM -0700, Kendall Shaw wrote:
I'm an openbsd novice. I replaced cards on computers in my home network
with gigabit ethernet and got a a gigabit switch. Can I determine what
speed or maybe what media my re0 interface is using?
you can use iperf or ttcp from the
On Tue, May 20, 2008 at 10:35:23AM +0200, Tobias Walkowiak wrote:
On Mon, May 19, 2008 at 03:06:21PM -0700, Kendall Shaw wrote:
I'm an openbsd novice. I replaced cards on computers in my home network
with gigabit ethernet and got a a gigabit switch. Can I determine what
speed or maybe what
On Mon, 2008-05-19 at 21:04 +0200, Marc Balmer wrote:
If you think you can step in and help oga and the project, then please
contact me off-list. We can accept donations by wire, Visacard and
Mastercard (creditcard fees are covered by my company).
I am flat ass broke. If you can provide a URL
Dear Group,
when I try to remotely ssh connect to a OpenBSD 4.3 box via port 80 I get:
ssh_exchange_identification: Connection closed by remote host
Please note, that the same box allows me to use port 443
and both ports (80 and 443) are registered in the sshd_config file.
Thanks for your
Marc Balmer [EMAIL PROTECTED] writes:
If you think you can step in and help oga and the project, then please
contact me off-list. We can accept donations by wire, Visacard and
Mastercard (creditcard fees are covered by my company).
is there a specific account or URL for this, or should we
On Tue, May 20, 2008 at 10:47:14AM +0200, Claudio Jeker wrote:
I'm an openbsd novice. I replaced cards on computers in my home network
with gigabit ethernet and got a a gigabit switch. Can I determine what
you can use iperf or ttcp from the packages.
Isn't it insane to figure out the
Hi,
On Tue, 20 May 2008, GVG GVG wrote:
Dear Group,
when I try to remotely ssh connect to a OpenBSD 4.3 box via port 80 I get:
ssh_exchange_identification: Connection closed by remote host
Are you sure you are not trying to connect to httpd?
-bash-3.2$ ssh -p 80 -v brobding.mine.nu
On Mon, May 19, 2008 at 11:51:04PM -0500, Andrew Konkol wrote:
If you're looking for a single board computer using compact
flash...I've had good luck with my ALIX 2c3
http://pcengines.ch/alix2c3.htm
would be my recommendation, too. just bought one as my home router and
works really great! and
Hello guys,
I'm very pleased to announce that about 2.5 hours after the initial
email went out, enough money had been donated to fulfill the needed
amount! I'm shocked at how fast that all happened.
I'd like to publically thank everybody who donated any money towards
this, I can't express how
On Tue, May 20, 2008 at 11:25 AM, Floor Terra [EMAIL PROTECTED] wrote:
Hi,
On Tue, 20 May 2008, GVG GVG wrote:
Dear Group,
when I try to remotely ssh connect to a OpenBSD 4.3 box via port 80 I get:
ssh_exchange_identification: Connection closed by remote host
Are you sure you are not
Owain Ainsworth wrote:
I'm very pleased to announce that about 2.5 hours after the initial
email went out, enough money had been donated to fulfill the needed
amount! I'm shocked at how fast that all happened.
Well, actually it took a little bit longer than just 2.5 hours, but
nevertheless it
Si ce message ne s'affiche pas correctement, vous pouvez le visualiser en
suivant ce lien.
[IMAGE]
[IMAGE]
[IMAGE]
[IMAGE]
Bonjour,
La sauvegarde de fichier est indispensable aujourd'hui pour toute
entreprise.
Protigez efficacement votre messagerie, fichiers contre le piratage,
mauvaises
On Tue, May 20, 2008 at 02:02:43PM +0200, Marc Balmer wrote:
Owain Ainsworth wrote:
I'm very pleased to announce that about 2.5 hours after the initial
email went out, enough money had been donated to fulfill the needed
amount! I'm shocked at how fast that all happened.
Well, actually it
Hi,
when I try to remotely ssh connect to a OpenBSD 4.3 box via port 80 I get:
Not enough info, but in case you are trying to ssh into box as root,
you will most probably fail. Root login is disabled by default in
OpenBSD.
Maxim
On Tue, May 20, 2008 at 02:32:08PM +0200, Maxim Belooussov wrote:
| Hi,
|
| when I try to remotely ssh connect to a OpenBSD 4.3 box via port 80 I get:
|
| Not enough info, but in case you are trying to ssh into box as root,
| you will most probably fail. Root login is disabled by default in
|
On Tue, May 20, 2008 at 2:32 PM, Maxim Belooussov [EMAIL PROTECTED]
wrote:
Hi,
when I try to remotely ssh connect to a OpenBSD 4.3 box via port 80 I
get:
Not enough info, but in case you are trying to ssh into box as root,
you will most probably fail. Root login is disabled by default in
On Tue, May 20, 2008 at 02:32:08PM +0200, Maxim Belooussov wrote:
Hi,
when I try to remotely ssh connect to a OpenBSD 4.3 box via port 80 I get:
Not enough info, but in case you are trying to ssh into box as root,
you will most probably fail. Root login is disabled by default in
OpenBSD.
On Tue, May 20, 2008 at 2:58 PM, Maxim Belooussov [EMAIL PROTECTED]
wrote:
Hi,
I know but I don't try to go via root! I'm using a regular user!
Can you try to do ssh -v [EMAIL PROTECTED] and take a look at the output?
There can be so many reasons, and shooting them off one by one is a
bit
Hey,
I know but I don't try to go via root! I'm using a regular user!
What does `ssh -v [***]` say?
Buhbye... Nico
On Tue, May 20, 2008 at 03:42:18PM +0200, GVG GVG wrote:
On Tue, May 20, 2008 at 2:58 PM, Maxim Belooussov [EMAIL PROTECTED]
wrote:
Hi,
I know but I don't try to go via root! I'm using a regular user!
Can you try to do ssh -v [EMAIL PROTECTED] and take a look at the output?
There
Hello all,
I've RTFM (man pf.conf) and found this :
Only TCP and UDP packets can be associated with users; for other
protocols these parameters are ignored.
But I'm pretty sure it was working before the upgrade from 4.0 to 4.1,
then 4.2, then 4.3 (in fact, what caught my attention is that
Hi, I meet the same problem. The error messages looks like following:
$ sudo apachectl start
[Tue May 20 16:45:58 2008] [warn] VirtualHost *:80 overlaps with VirtualHost
*:80, the first has precedence, perhaps you need a NameVirtualHost directive
[Tue May 20 16:45:58 2008] [warn] VirtualHost
On Tue, May 20, 2008 at 4:55 PM, Taleon [EMAIL PROTECTED] wrote:
Hi, I meet the same problem. The error messages looks like following:
$ sudo apachectl start
[Tue May 20 16:45:58 2008] [warn] VirtualHost *:80 overlaps with VirtualHost
*:80, the first has precedence, perhaps you need a
On Tue, May 20, 2008 at 11:25 AM, Floor Terra [EMAIL PROTECTED] wrote:
Thanks for your reply!
Apache doesn't run nor any other httpd service. And yes, when defining port
80 in the sshd_config file I did re-start the whole box! Also when I go via
a browser to my server it displays:
I know, Who cares? or Great! is my own response but my users have
other wishes that include msn.com and this one has me stumped.
I had a more complex pf rule set but now I'm using a simple rule set
based almost entirely on the one from the PF FAQ:
ext_if=em0 # External Public Interface
Maybe we could create a fake blog site stating that MSN.COM is offline until
the M$Soft-Yahoo deal is completed.
Would that help you out.
Jay
I know, Who cares? or Great! is my own response but my users have
other wishes that include msn.com and this one has me stumped.
I had a more
On 2008-05-19, Cesare Gargano [EMAIL PROTECTED] wrote:
On 19/05/08 15:50 +0200, Cesare Gargano wrote:
On 18/05/08 17:20 +0200, Jona Joachim wrote:
I very much appreciate the work of reyk@ on dhclient to make it renew the
lease when the
link is lost. However it might happen that you don't
On 2008-05-19, Cesare Gargano [EMAIL PROTECTED] wrote:
On 19/05/08 15:50 +0200, Cesare Gargano wrote:
On 18/05/08 17:20 +0200, Jona Joachim wrote:
I very much appreciate the work of reyk@ on dhclient to make it renew the
lease when the
link is lost. However it might happen that you don't
Could you be connected behind a proxy? Some company routing rules will
automatically forward all port-80 requests to a proxy box.
-acp
On Tue, May 20, 2008 at 01:57:20PM +0200, GVG GVG wrote:
On Tue, May 20, 2008 at 11:25 AM, Floor Terra [EMAIL PROTECTED] wrote:
Hi,
On Tue, 20 May 2008,
On Tue, 20 May 2008, Jay Hart wrote:
Maybe we could create a fake blog site stating that MSN.COM is offline until
the M$Soft-Yahoo deal is completed.
Would that help you out.
Jay
I think I smell hot tar, and I just saw a couple of naked chickens run
past the window...
Jeff
I know, Who
Taleon wrote:
Hi, I meet the same problem. The error messages looks like following:
$ sudo apachectl start
[Tue May 20 16:45:58 2008] [warn] VirtualHost *:80 overlaps with VirtualHost
*:80, the first has precedence, perhaps you need a NameVirtualHost directive
[Tue May 20 16:45:58 2008]
I have been following with interest the developments with regard to
dhcpd gaining spamd-like synchronisation features. I would like to be
able to make use of these features if I can. However, I have a question:
Currently, I have a pair of CARP firewalls in a failover configuration.
We have
Might be an MTU issue. Try tcpdumping an interface other than pflog0.
On Tue, May 20, 2008 at 10:15 AM, Jeff Ross [EMAIL PROTECTED] wrote:
I had a more complex pf rule set but now I'm using a simple rule set based
almost entirely on the one from the PF FAQ:
ext_if=em0 # External Public
On Tue, May 20, 2008 at 10:31 AM, Jeff Ross [EMAIL PROTECTED] wrote:
I think I smell hot tar, and I just saw a couple of naked chickens run past
the window...
For some reason I kept reading that as naked chicks...and while a
nice metal image, it wasn't fitting in well with the rest of the
Tobias Walkowiak wrote:
On Mon, May 19, 2008 at 11:51:04PM -0500, Andrew Konkol wrote:
If you're looking for a single board computer using compact
flash...I've had good luck with my ALIX 2c3
http://pcengines.ch/alix2c3.htm
would be my recommendation, too. just bought one as my home
Jeff Ross wrote:
I know, Who cares? or Great! is my own response but my users have
other wishes that include msn.com and this one has me stumped.
I had a more complex pf rule set but now I'm using a simple rule set
based almost entirely on the one from the PF FAQ:
ext_if=em0 # External
On Tue, 20 May 2008 01:17:52 +0700, ropers [EMAIL PROTECTED] wrote:
Well,
There is a project called bogon list and de-bogon list. We continue
monitor these un-allocated IP's to make sure that nothing from this bogons
gettin to the net.
Or it just me being paranoid...
On 2008-05-20, Daniel Melameth [EMAIL PROTECTED] wrote:
Might be an MTU issue.
Probably. Microsoft block *all* ICMP at their border. (you at the back of
the classroom, stop sniggering.. :-)
scrub max-mss should work around it, or [EMAIL PROTECTED] may be
able to get in touch with the admin of
I don't know why the quoting that way.
And my mail program (hotmail/IE7) can't set line lengths.
Up to me to just eyeball it and hit return every so often,
and then, often returns get removed somewhere anyway,
like when I put them in for other formatting reasons.
It does stink. (I even pay for the
On 2008-05-20, Insan Praja SW [EMAIL PROTECTED] wrote:
There is a project called bogon list and de-bogon list. We continue
monitor these un-allocated IP's to make sure that nothing from this bogons
gettin to the net.
Or it just me being paranoid...
On Tuesday 20 May 2008, Jay wrote:
I even pay for the premium service
to remove the annoying signature ads..
at least one good thing about gmail (besides the excellent spam
filtering) is no signature ads
--
Chris
On Tue, May 20, 2008 at 01:52:15PM -0500, Mark Rolen wrote:
I agree with all of the above (I love my little alix2c3 firewall and it was
definitely cheaper than a soekris, less than half the cost for three
interfaces + USB), but the OP is complaining about slow USB speeds...
aren't the ports
Hi,
I would like to have more than one openbsd root filesystem on my
hardrive. Could somebody please explain how to go about this?
In a linux environment I could set up 2 lv's and point to each of them
by kernel commandlines.
Using openbsd I could use multiple bios-partitions each having an a:
I have a couple jetway mini-itx boxen I like. There are daughter
boards for these guys, I put a 3x10/100/1000 card in there for 4 nics
total.
Boards: http://www.jetwaycomputer.com/VIA.html
Daughter: http://www.jetwaycomputer.com/Daughter_Board.html
Sample Dealer: http://www.logicsupply.com/
On
Lord Sporkton wrote:
requirements are simple:
usb 2.0
at least 1 pci slot free or 2 built in ethernet ports
OpenBSD compatible
cheap
FitPC! I use one my self, and it works purrfectly!
http://www.fit-pc.com/new/
--
chs
2008/5/20 Mark Rolen [EMAIL PROTECTED]:
Tobias Walkowiak wrote:
On Mon, May 19, 2008 at 11:51:04PM -0500, Andrew Konkol wrote:
If you're looking for a single board computer using compact
flash...I've had good luck with my ALIX 2c3
http://pcengines.ch/alix2c3.htm
would be my
Hello!
I would like to use lynx to manage my local small lan router. I can
manage a broadband modem that way. But the router webpage expects to be
managed by a graphical browser, so the initial control webpage just
shows up as unintelligible garbage.
Since I run command line only, I do not
On Tue, May 20, 2008 at 02:26:11PM -0700, Lord Sporkton wrote:
| this is indeed the system im going to go with, the alix2c3, i found a
| nice crypto accelerator for it too :)
Just FYI :
$ dmesg | grep ^glxsb
glxsb0 at pci0 dev 1 function 2 AMD Geode LX Crypto rev 0x00: RNG AES
$ apropos glxsb
I'm following -stable until I read some more, and I'm unclear on some
aspects of syncing source.
What's a patch?
---
There was an earlier post about why there are no security patches for
4.3 listed at:
http://www.openbsd.org/pkg-stable.html
Is that different from:
Hallo!
Some time ago i did experiment with dual-booting (actually
multi-booting) from one harddisk several OpenBSD instances, for the sake
of fun. I settled to using dualboot OpenBSD to make upgrades more
suitable for me (just unpacking new distribution's file sets under /mnt
mounted empty
On Tue, 20 May 2008, Kendall Shaw wrote:
I'm following -stable until I read some more, and I'm unclear on some
aspects of syncing source.
There was an earlier post about why there are no security patches for
4.3 listed at:
http://www.openbsd.org/pkg-stable.html
Is that different from:
Stuart Henderson wrote:
On 2008-05-20, Daniel Melameth [EMAIL PROTECTED] wrote:
Might be an MTU issue.
Probably. Microsoft block *all* ICMP at their border. (you at the back of
the classroom, stop sniggering.. :-)
scrub max-mss should work around it, or [EMAIL PROTECTED] may be
able to get
2008/5/20 Default User [EMAIL PROTECTED]:
Hello!
I would like to use lynx to manage my local small lan router. I can
manage a broadband modem that way. But the router webpage expects to be
managed by a graphical browser, so the initial control webpage just
shows up as unintelligible
s/EMCAScript/ECMAScript
2008/5/21 ropers [EMAIL PROTECTED]:
2008/5/20 Default User [EMAIL PROTECTED]:
Hello!
I would like to use lynx to manage my local small lan router. I can
manage a broadband modem that way. But the router webpage expects to be
managed by a graphical browser, so the
The last version of OpenBSD I have been able to install on my Compaq
Prolient DL360 G2 is 4.1. In all cases I am attempting to boot and
install using the i386 cd4x.iso. In both cases of attempting to
install 4.2 and 4.3, the installer hard-locks at the end of the dmesg.
No keyboard input is
I am hoping someone in the know can shed some lights on this.
My snippet of bgpd.conf:
# MCI
mci_as=11486
mci_peer1=142.77.114.132
mci_peer2=142.77.114.133
mci_peer3=208.218.245.33
# Allstream
allstream_as=15290
allstream_peer1=209.82.101.41
allstream_carp_ip=209.82.101.44
As was announced on undeadly recently, I have been back hacking on PowerPC.
One of the things noticed once SMP was working was that an occasionally seen
wdc DRQ error message occurred very frequently. This pointed out that
the interrupt controller was doing something poorly. After several attempts
For really large file systems or for small memory
machines, the algorithms in fsck_ffs will inevitably
run out of memory. It appears that there are two
possibilities to deal with this:
1) multiple sub-passes over the file system,
dealing with parts of the data each time
2) modifying
On 2008-05-20, Lu Vo [EMAIL PROTECTED] wrote:
group MCI {
remote-as $mci_as
set community 701:120
}
None of the upstream providers (MCI and Allstream) claim they see the
community strings set by me. Is this not the correct way of setting
community attribute ?
see bgpd.conf(5) -
On Tue, May 20, 2008 at 4:21 PM, Lu Vo [EMAIL PROTECTED] wrote:
I am hoping someone in the know can shed some lights on this.
match to group MCI set { community 701:120 }
match to group Allstream set { community 15290:90 }
2008/5/20 Aaron Glenn [EMAIL PROTECTED]:
On Tue, May 20, 2008 at 4:21 PM, Lu Vo [EMAIL PROTECTED] wrote:
I am hoping someone in the know can shed some lights on this.
match to group MCI set { community 701:120 }
match to group Allstream set { community 15290:90 }
Stuart and Aaron,
Thank
On Tue, 2008-05-20 at 18:25 -0400, Martin Gignac wrote:
On Tue, 20 May 2008, Kendall Shaw wrote:
I'm following -stable until I read some more, and I'm unclear on some
aspects of syncing source.
There was an earlier post about why there are no security patches for
4.3 listed at:
On Tue, 20 May 2008, Kendall Shaw wrote:
Can you also help me understand these words about -current, from the
FAQ:
There are also flag days and major system changes that the developers
navigate with one-time tools, which mean that source-based updating is
not possible.
There are changes that
On Tue, 2008-05-20 at 22:37 -0400, Martin Gignac wrote:
On Tue, 20 May 2008, Kendall Shaw wrote:
Can you also help me understand these words about -current, from the
FAQ:
There are also flag days and major system changes that the developers
navigate with one-time tools, which mean
66 matches
Mail list logo
