In keeping with your 'lets get something up on there to point the whiners at',
how about adding this:
* Add support for RFC5837 to OpenBSD's IP stack.
This could be suitable task since it presumably has 'cool factor' is an
easily definable task, and is not trivial to write.
/Pete
On 22.
On 22/04/2010, at 5:02 PM, sonjaya wrote:
hi all ...
i have problem installed maia in openbsd 4.6 , problem module perl file(1).
Application/Module Version Status
Perl : 5.10.0 : OK
file(1)
On 20/04/2010, at 4:05 PM, STeve Andre' wrote:
On Monday 19 April 2010 23:51:21 Sean Howard wrote:
I have a Kingston, it has behaved very erratically (and currently lost its
partition, leaving the drive unformatted). I've done no research into
this,
but a similar problem is there. I found
On Wed, 21 Apr 2010 10:54:07 + (UTC)
Stuart Henderson s...@spacehopper.org wrote:
On 2010-04-21, Duncan Patton a Campbell campb...@neotext.ca wrote:
I looked at the support site and found that there's a
substantial driver to download that only supports recent
MS products.
same
i get solusion why this happent.
me using sonicwall ass gateway ...
here i capture log in server and sonicwall
# wget
ftp://anga.funkfeuer.at/pub/OpenBSD/4.6/packages/i386/clamav-0.95.2.tgz
--2010-04-22 17:53:03--
ftp://anga.funkfeuer.at/pub/OpenBSD/4.6/packages/i386/clamav-0.95.2.tgz
On 4/22/10 2:05 AM, Pete Vickers wrote:
In keeping with your 'lets get something up on there to point the whiners at',
how about adding this:
* Add support for RFC5837 to OpenBSD's IP stack.
This could be suitable task since it presumably has 'cool factor' is an
easily definable task, and is
On 4/22/2010 1:02 AM, sonjaya wrote:
i have problem installed maia in openbsd 4.6 , problem module perl file(1).
http://marc.info/?m=126887732124225
Please test and let me know how it goes. I fixed this by just removing
the check. Now that I'm actually looking at it more, I think maybe
On Thu, Apr 22, 2010 at 07:14:31AM -0400, Daniel Ouellet wrote:
On 4/22/10 2:05 AM, Pete Vickers wrote:
In keeping with your 'lets get something up on there to point the whiners
at',
how about adding this:
* Add support for RFC5837 to OpenBSD's IP stack.
This could be suitable task
On Thu, Apr 22, 2010 at 01:40:42PM +0200, Claudio Jeker wrote:
In the end all that matters is that someone gets up from his comfy couch,
hacks something up and sends a diff around and the only way that is going
to happen is because of egoistical reasons. Nobody will move a finger
unless there
On 4/22/10 2:44 PM, Owain Ainsworth wrote:
On Thu, Apr 22, 2010 at 01:40:42PM +0200, Claudio Jeker wrote:
In the end all that matters is that someone gets up from his comfy couch,
hacks something up and sends a diff around and the only way that is going
to happen is because of egoistical
On 04/22/10 06:44, Owain Ainsworth wrote:
On Thu, Apr 22, 2010 at 01:40:42PM +0200, Claudio Jeker wrote:
In the end all that matters is that someone gets up from his comfy couch,
hacks something up and sends a diff around and the only way that is going
to happen is because of egoistical
Lars Nooden wrote:
On 04/19/2010 09:12 PM, Leonardo Carneiro - Veltrac wrote:
... the gateway features does not work 100% yet (at least in the
server that i use)
There are additional solutions. One is to work with the contacts to
get them set up with XMPP clients, since the gateway
I have two spare t2000 machines that I am setting up load balancing on.
Is there anything I can test to confirm this? I tried the snapshot
dated 2010-04-20.
Jason Wagstaff
System Administrator - Specialist
Information Technology Services (ITS)
University of Missouri St.Louis
One University
Shane Lazarus wrote:
Heya
Seems to me that you should probably allow traffic out to the $proxy
via the $dmz_if at some point...
For that matter, allow from the $proxy back in through the $dmz_if and
out...
Something like:
# tables
table msn_rdr persist const file /etc/pf.conf.d/msn-rdr
Novatel (0x1410) makes an MC760 (0x6002) used by
Virgin Mobile in their BroadBand2Go card.
This card advertises itself as incompatible with
linux at this time.
After adding the device to usbdevs, rebuilding
usbdevs.h and usbdevs_data.h, and adding to
umsm.c it was finally recognized and mounted
You have been invited to join lina susana alvarez carmona's email list(s).
Click the link(s) to confirm your subscription:
Tratamiento 100% natural para el control de la diabetes y la eliminacisn de las
neuropatmas.
Uso: 4 meses y en dosis de 2 capsulas en cada comida
el tratamiento Kit
On Thu, Apr 22, 2010 at 3:44 PM, Ted Roby ted.r...@gmail.com wrote:
Novatel (0x1410) makes an MC760 (0x6002) used by
Virgin Mobile in their BroadBand2Go card.
...
Still, I have no success yet in initiating ppp.
I consider this as my own error, and suspect
the device will operate as
On Thu, Apr 22, 2010 at 8:57 AM, David Coppa dco...@gmail.com wrote:
The diff is ok.
Regarding your problem:
have you tried all ports?
Usually it can be /dev/cuaU0 or /dev/cuaU2
Yes. But thank you for the confirmation.
I will continue troubleshooting my ppp syntax.
My pasting of ppp.conf
Hi,
I have two ISPs and a LAN. I need to load balance outgoing connections
from the LAN between the ISPs.
My router is running OpenBSD 4.6-stable, up-to-date.
-
| |
ISP 1 ---(isp1 box)---+-ext1_if |
Hello,
Yes it loaded properly. Yes I had missied the macro for the external
NIC it is included in the original ruleset. t_externa = fxp0
This is the result for pfctl -sr:
match in all scrub (no-df)
block drop all
pass out all flags S/SA keep state
pass out quick on fxp0 inet proto tcp from
Why are you doing from any to (fxp0) ? That's your problem. Change all
the rules like that to from any to any since you're already putting
the rule on that interface and it should fix you up. As long as you're
not redirecting you can turn logging on specific rules and see why
they're blocking
On 2010-04-22, Ted Roby ted.r...@gmail.com wrote:
On Thu, Apr 22, 2010 at 8:57 AM, David Coppa dco...@gmail.com wrote:
The diff is ok.
Regarding your problem:
have you tried all ports?
Usually it can be /dev/cuaU0 or /dev/cuaU2
Yes. But thank you for the confirmation.
I will continue
Neither are you, so why does that matter?
Never said on imply I was.
If you got a different feeling, my deepest apology to you Claudio!
Best,
Daniel
http://larosa.com.mx/catalogo/promocion-mayo-p-273.html
[demime 1.01d removed an attachment of type application/octet-stream which had
a name of MAYOPROMO2.jpg]
N N5 VISA card ON5 3 N,ON?N:N5O N4O ON5N9O
N N5 MASTER card ON5 3 N,ON?N:N5O N4O ON5N9O
N N5 AMERICAN EXPRESS ON5 6 N,ON?N:N5O N4O ON5N9O
** **
**N N9 NNON?ON9N:N-O N5ON1N9ON5N/N5O NON?ON?O
N= N=N1
ON;N7OON=N?ON= N:N1N9 NN5 3/4NN7N=N5O N5ON9ON1N3N-O**
**NN1N9
On 04/22/10 18:22, Allie Daneman wrote:
Why are you doing from any to (fxp0) ? That's your problem. Change all
I fail to see why that would cause any issues. Care to elaborate?
/Alexander
the rules like that to from any to any since you're already putting
the rule on that interface and it
Steve Shockley wrote:
On 4/22/2010 1:02 AM, sonjaya wrote:
i have problem installed maia in openbsd 4.6 , problem module perl
file(1).
http://marc.info/?m=126887732124225
Please test and let me know how it goes. I fixed this by just
removing the check. Now that I'm actually looking
Hi there!
I think it's very convenient to cycle through windows in a group.
So I made a quick patch to demonstrate this feature [1].
If you think it's nice and useful, I can rewrite client_cycleingroup()
to use a flag for client_cycle(), make documentation and so.
[1]
On Tue, Apr 20, 2010 at 8:17 AM, Tomoyuki Sakurai
tomoyu...@reallyenglish.com wrote:
Failover works, IP balancing doesn't.
Trying to make it work, tweaking every possible options.
Then, you set wrong advskew in the process... #fail
Failover works.
IP balancing DOES work.
Sorry for the noise
On 4/22/2010 6:38 PM, Helmut Schneider wrote:
Actually it matches any string containing a minus followed by 1 or more
digits or dots, e.g. file-4.24 but also file-..
I'd use -(\d+\.)+\d+.
Thanks. It appears it's not the regex that's the problem, apparently
file changed the output of file -v
Hola Mi nombre es Pilar Zanella, directora general de Juveness Mexicana.
Me pongo en contacto contigo para hacerte llegar un nuevo concepto en
cosmitica masculina. El concepto de belleza masculina ha sufrido un cambio
asombroso en los zltimos aqos, consciente de aquellos factores que afectan de
Hello,
THat solved the issue but I have about 20 rulesets that have the same
syntax. I dont see anything yet also about this.
Please elaborate.
Andres
On Thu, Apr 22, 2010 at 3:59 PM, Alexander Hall alexan...@beard.se wrote:
On 04/22/10 18:22, Allie Daneman wrote:
Why are you doing from any
Hi,
At work, we use OpenBSD as a gateway (PF for firewalling, and Vpn using
(ipsec.conf file and isakmpd -K).
We have 2 companies connected in vpn with our OpenBSD Box. All works fine.
Now, i wish to connect at work from my home using a Mac (MAC OS 10.6), but
i don't know how to configure it.
On
Any CD's shown up? Especially in Europe?
Andri
--
34 matches
Mail list logo
