I've been trying to set up a sparc64 machine this evening with two
drives: a 512MB CF card on an IDE adapter, and a 4GB IDE drive. The
boot disk is the CF card at wd0. I decided to put a small swap
partition on the 4GB drive, which is wd1. FAQ 14.5.2 said 'If you do
not wish to use swap on the
Small update. Theo has suggested to try i386 without apm support.
@@ -1,4 +1,4 @@
-OpenBSD 4.7-current (RAMDISK_CD) #6: Thu Jul 22 20:21:46 EDT 2010
+OpenBSD 4.8-beta (RAMDISK_CD) #1: Thu Jul 27 20:29:08 EDT 2010
r...@acer.westerback.sa:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R)
On 28 July 2010 06:57, Nathan Sandver nsand...@gmail.com wrote:
The swap partition I created at wd1b is correctly listed in /etc/fstab:
# cat /mnt/etc/fstab
/dev/wd1b none swap sw 0 0
/dev/wd0a / ffs rw 1 1
/dev/wd1a /usr ffs rw,nodev 1 2
What happens when you remove the wd1b line from
Hi,
I have th following aim : Master OpenBSD, pass BSDP(OpenBSD)exam when this
one will be available.
I have good knowledege on TCP/IP;PF use
Is there a good training center in French or English language?
(I will be ready to buy a plane ticket.)
With these covered topics :
INSTALLATION
UNIX BASIC
Maybe anyone knows how can I get any debugging information about my device?
I could try to solve it on my own if I understood where the error is...
Dmitrij D. Czarkoff czark...@gmail.com wrote:
Hello!
I'm trying to connect a wireless network on my ASUS R2Hv. Both the built-in
and usb dongle
On 27. juli 2010, at 15.09, Pete Vickers wrote:
Hi,
From dmesg, the graphics card in my Sun blade100 is:
machfb0 at pci0 dev 19 function 0 ATI Rage XL rev 0x27
machfb0: ATY,RageXL, 1280x1024
which is connected via DVI cable to a Sun monitor #365-1429. This monitor
supports
On 07/28/10 04:44, open...@e-solutions.re wrote:
Hi,
I have th following aim : Master OpenBSD, pass BSDP(OpenBSD)exam when this
one will be available.
I have good knowledege on TCP/IP;PF use
Is there a good training center in French or English language?
(I will be ready to buy a plane ticket.)
Synproxy only appears to work on the interface with the default gateway
(egress). I could never make it work on a firewall with more than 1
external interface properly.
I don't know if this is a bug or by design.
Tom
On Wed, 28 Jul 2010 05:50:19 -0600
Chris Bennett ch...@bennettconstruction.biz wrote:
My advice is to setup a server with some websites (doesn't matter if the
are real or bogus) and learn to deal with the problems that pop-up. Be
sure to get an ISP with remote IP-KVM so you can fix any
Hi,
I'm trying to get my head round Queue'ing / Atlq and have read
(http://www.openbsd.org/faq/pf/queueing.html).
We are getting a Gigabit connection to the local internet peering exchange, and
I would like to offer other tenants in our building internet access to help
offset our costs.
What
Pete Vickers p...@systemnet.no wrote:
From dmesg, the graphics card in my Sun blade100 is:
machfb0 at pci0 dev 19 function 0 ATI Rage XL rev 0x27
machfb0: ATY,RageXL, 1280x1024
which is connected via DVI cable to a Sun monitor #365-1429.
DVI? On a Blade 100?
I thought that one of the
On 07/28/10 07:49, Robert wrote:
On Wed, 28 Jul 2010 05:50:19 -0600
Chris Bennettch...@bennettconstruction.biz wrote:
My advice is to setup a server with some websites (doesn't matter if the
are real or bogus) and learn to deal with the problems that pop-up. Be
sure to get an ISP with remote
Stefan Sperling s...@cvs.openbsd.org wrote:
Log message:
Install the en_US.UTF-8 ctype locale support file, and allow the UTF-8
ctype locale to be enabled via setlocale(3) (export LC_CTYPE='en_US.UTF-8').
A lot of programs, especially from ports, will now start using UTF-8 if the
UTF-8
On 28/07/10 14:49, Robert wrote:
On Wed, 28 Jul 2010 05:50:19 -0600
Chris Bennettch...@bennettconstruction.biz wrote:
My advice is to setup a server with some websites (doesn't matter if the
are real or bogus) and learn to deal with the problems that pop-up. Be
sure to get an ISP with
Buenos Dias/Tardes Sr/a:
La crema de Concha Nacar, borra manchas generadas por el paso de los
aqos, por el sol y aquellas producidas por el embarazo. Atenza todo tipo
de cicatrices, elimina el acni, los barritos y espinillas en forma rapida
y efectiva. Alivia las picaduras de insectos y
| Maybe anyone knows how can I get any debugging information about my device?
| I could try to solve it on my own if I understood where the error is...
ifconfig zyd0 debug is usually a good start.
Damien
Little status update. We got one laptop ordered (thanks everyone!) and
are a few hundred short of the next. So if you care about these bugs
please pony up ;-)
/marco
On Mon, Jul 26, 2010 at 12:52:35PM -0500, Marco Peereboom wrote:
I have got a few pledges for hp laptops. I have gotten good
On Wed, 28 Jul 2010 15:59:33 +0100
Michal mic...@sharescope.co.uk wrote:
Apart from ESXi is free but the management isn't...you need vSphere to
manage the thing. This seams like a very expensive way to learn an
Just a note:
You don't need vSphere for this setup; only if you have to manage a
On Mon, Jul 26, 2010 at 12:52:35PM -0500, Marco Peereboom wrote:
I have got a few pledges for hp laptops. I have gotten good (as in bad)
test reports of the following models that fail one way or another:
* HP eb8730w
* HP nw9440
* HP Mini 5102
* HP 530
While I cannot donate my HP
On Wed, Jul 28, 2010 at 05:45:14PM +0200, Jan Stary wrote:
On Mon, Jul 26, 2010 at 12:52:35PM -0500, Marco Peereboom wrote:
I have got a few pledges for hp laptops. I have gotten good (as in bad)
test reports of the following models that fail one way or another:
* HP eb8730w
* HP
Then mail me acpidump -o hp8350 results + dmesg + pcidump -v
Hi,
I have an hp ProBook 4520s that has problem with acpi (boot only with
acpi disable).
Do you need my results for those commands?
Best regards.
--
Matteo Filippetto
Date: Wed, 28 Jul 2010 05:50:19 -0600
From: ch...@bennettconstruction.biz
Concrete with re-bar works well for hardening the box.
As far as the software, OpenBSD comes pre-hardened.
Nothing really needs to be changed for security.
Use good passwords and long passwords is about all you have
open...@e-solutions.re writes:
I have th following aim : Master OpenBSD, pass BSDP(OpenBSD)exam when this
one will be available.
I have good knowledege on TCP/IP;PF use
Is there a good training center in French or English language?
(I will be ready to buy a plane ticket.)
Assuming the
On Wed, Jul 28, 2010 at 9:21 AM, matteo filippetto
matteo.filippe...@gmail.com wrote:
Then mail me acpidump -o hp8350 results + dmesg + pcidump -v
Hi,
I have an hp ProBook 4520s that has problem with acpi (boot only with
acpi disable).
Do you need my results for those commands?
Only if
Hello
I have a Compaq Presario 3019US working correctly with OBSD-4.7, and i
have recived a ThinkPad Edge 14 i330 (4 processors) as a present; it
has Windows 7.
The parttions do not finish at the end of cilinders by defaults. My
question is if you recomend keeping Windows 7 beside to OBSD working
Well, only one interface is set to be a default gateway out, the
other has an IP with no gateway, but a manual route entry for how to
reach the client machine. I've also tried applying the synproxy rules on
the interface facing the client heading outbound to no avail.
On 7/28/2010 5:26 AM,
fqui nonez fquinon...@gmail.com wrote:
this Laptop has an extra key (fn) which i could not find how to use it
to jump to TTYs.
As I understand, Fn key doesn't send a separate keypress event and therefor
can't be remapped.
Another question is related to use ix86 or amd64?
i386 is much better
damien.bergam...@free.fr wrote:
ifconfig zyd0 debug is usually a good start.
Thanks.
Actually, I didn't get anything I believe to be helpful.
So, my steps were:
# ifconfig zyd0 debug
# ifconfig zyd0 up
# ifconfig zyd0 scan
zyd0: flags=8847UP,BROADCAST,DEBUG,RUNNING,SIMPLEX,MULTICAST mtu 1500
Christian Weisgerber na...@mips.inka.de wrote:
== xterm ==
What doesn't work: UTF-8 mode is incompatible with 8-bit control
sequences. If that doesn't ring a bell for you, then you don't
need to worry about it. ;-)
I only noticed because the RMC on my AlphaServer 800 inserts 8-bit
controls to
| So now I know that that:
|
| 1. the association fails with status 25;
| 2. the drivers actively sends free-roaming requests during
| asssociation
| process while is requested to connect an exact network.
|
| Where can I read what is association failed (status 25) and
| deauthenticate (reason
Contact me for information
On Jul 28 11:07:08, Marco Peereboom wrote:
On Wed, Jul 28, 2010 at 05:45:14PM +0200, Jan Stary wrote:
On Mon, Jul 26, 2010 at 12:52:35PM -0500, Marco Peereboom wrote:
I have got a few pledges for hp laptops. I have gotten good (as in bad)
test reports of the following models that fail
Jan Stary h...@stare.cz writes:
Actually a test with up to the second -current would be helpful to get a
baseline where we are at with this machine.
What is the second -current?
up to the second -- as fresh as physically possible
- p
--
Peter N. M. Hansteen, member of the first RFC 1149
On Wed, Jul 28, 2010 at 4:36 PM, Jan Stary h...@stare.cz wrote:
Actually a test with up to the second -current would be helpful to get a
baseline where we are at with this machine.
What is the second -current?
-current that is current as of this second.
On Jul 28 23:06:48, Peter N. M. Hansteen wrote:
Jan Stary h...@stare.cz writes:
Actually a test with up to the second -current would be helpful to get a
baseline where we are at with this machine.
What is the second -current?
up to the second -- as fresh as physically possible
damien.bergam...@free.fr wrote:
Status 25 is IEEE80211_STATUS_SHORTSLOT_REQUIRED.
It means that the access point refuses association from
clients that do not support short slot time.
Thanks!
While it's not a valid workaround, I've set my router up to long slot, so my
issue is resolved.
| Thanks!
|
| While it's not a valid workaround, I've set my router up to long slot,
| so my issue is resolved.
|
| Still, could You please tell me where can I find that info without
| disturbing developpers and mailing list memebers?
In the IEEE 802.11 standard or in
Quoting Peter N. M. Hansteen pe...@bsdly.net:
Jan Stary h...@stare.cz writes:
Actually a test with up to the second -current would be helpful to
get a
baseline where we are at with this machine.
What is the second -current?
up to the second -- as fresh as physically possible
On Mon, 26 Jul 2010 12:52:35 -0500
Marco Peereboom sl...@peereboom.us wrote:
I am 25% there with pledges. So if you are interested in getting
these 2 bugs fixed send me an email with the pledge amount. I won't
accept cash until we have enough to actually order machines.
150 USD sent. Thank
I got a reply on the FreeBSD lists suggesting the firewall itself
-had- to be the default gateway for the client;
Ahh. That explains it then. I was operating under the assumption that
the machine doing the synproxy would forge the reply such that the
TARGET host would reply to the
On 7/29/10, Justin jus...@sk1llz.net wrote:
I got a reply on the FreeBSD lists suggesting the firewall itself -had- to
be the default gateway for the client;
Ahh. That explains it then. I was operating under the assumption that the
machine doing the synproxy would forge the reply such
FF 3.6.7 was crashing as reported by Dawe and me[1] same as X (from
snapshots and built from source). Rebuilding xenocara from source with
debug got X working (don't know why).
I tried building FF 3.6.8 and it too is crashing with signal 11. I
built FF 3.6.8 with DEBUG=-g -O0 hoping to at least
On Wed, Jul 28, 2010 at 2:43 AM, Fred Crowson fred.crow...@gmail.com wrote:
On 28 July 2010 06:57, Nathan Sandver nsand...@gmail.com wrote:
The swap partition I created at wd1b is correctly listed in /etc/fstab:
# cat /mnt/etc/fstab
/dev/wd1b none swap sw 0 0
/dev/wd0a / ffs rw 1 1
This removes any chance of scalability or the ability to separate
out single targeted IP addresses. I suppose the synproxy machine would
have to in some way act as NAT - translating between the two - or
alternately, act as a NAT to establish an initial session, then insert a
state to pass
Confirmed - synproxy works great if the synproxy machine is the
default gateway for the end host. Sadly this means scalability (adding
multiple synproxy boxes) is not possible, nor is it possible to filter a
specific IP out of the end machines ranges.
Perhaps I'm shooting for the moon
El Planeador Maestro de ProducciC3n Altamente Competitivo - TC)cnicas,
Habilidades y Herramientas de Excelencia
ConviC)rtase en un verdadero Mariscal de Campo organizando, integrando
y coordinando de manera inteligente los esfuerzos de las C!reas que
forman parte del negocio manufacturero
On Thu, Jul 29, 2010 at 3:42 AM, patrick keshishian pkesh...@gmail.com wrote:
FF 3.6.7 was crashing as reported by Dawe and me[1] same as X (from
snapshots and built from source). Rebuilding xenocara from source with
debug got X working (don't know why).
I tried building FF 3.6.8 and it too
On Wed, Jul 28, 2010 at 07:59:20PM -0700, Justin wrote:
Confirmed - synproxy works great if the synproxy machine is the
default gateway for the end host.
Yes, PF has to handle every packet of a synproxy'd connection.
Sadly this means scalability (adding multiple synproxy boxes) is not
48 matches
Mail list logo
