Hello world,
I am using an ASUS AT3GC-I motherboard.
I have installed OpenBSD 4.8 i386 on it.
Everything is well except the ACPI support, indeed, when I press the
power button (while the OS is running), the OS put itself into
suspend mode (the hard-drive stops and CPU powers off).
But I would
On 2010-11-14, OpenBSD Geek open...@e-solutions.re wrote:
Hi,
I read FAQ, and found nothing about install.site script.
And tried : man install.site, give me nothing.
Is there someone that can explain me how to do a unattended installation ?
I wish for example have this by default :
-
On Wed, Nov 3, 2010 at 11:24, Gregory Edigarov g...@bestnet.kharkov.ua wrote:
It now seems like 4.7's X on 4.8 base system (yes I know it's bad and
unsupported but that's where I left after all) works perfectly with DRI
turned off. However, there were hungups when I've been trying to run
4.7's
Hi,
I'd like to ask if anyone is using Adaptec 5805Z sata/sas raid
controller on OpenBSD.
Is this device tested/supported?
I guess not cause it's not mentioned anywhere on the man pages, aac(4)
etc or the supported hardware web page.
regards,
Giannis
On Sat, Nov 06, 2010 at 03:47:54PM +0100, Claudio Jeker wrote:
On Sat, Nov 06, 2010 at 02:13:46PM +0100, Jan Stary wrote:
For some time now, I have been using the following sysctl's
mentioned in FAQ 6.6.4, which sped up my network traffic
considerably:
net.inet.tcp.recvspace
Hello!
I have installed 4.8 release on my IBM T43 recently.
Suspend works great, but my atheros wi-fi card didn't resume and following
lines appears after resuming:
cbb0: bad Vcc request. sock_ctrl 0xff8f, sock_status 0x
ath0 detached
cbb0: bad Vcc request. sock_ctrl 0xff88,
On Fri, 12 Nov 2010 17:29:53 -0500
Chris Smith obsd_m...@chrissmith.org wrote:
On Fri, Nov 12, 2010 at 5:06 PM, David Astua dast...@gmail.com wrote:
Check this:
http://www.chiark.greenend.org.uk/~peterb/network/drop-vs-reject
Good article. Stealth mode is highly overrated. I generally use
Kevin Chadwick ma1l1i...@yahoo.co.uk writes:
I'd say drop mode saves some resources in case of dos and does slow down
the scan. I don't see timeouts for users connecting to the wrong place
as a big problem at all, though the messages may help them
very occasionally.
For the drop vs return
Hi,
I read OpenBSD FAQ at
[url]http://www.openbsd.org/faq/fr/faq4.html#site[/url]
I understood well, that install.site/ Upgrade.site and of course
SiteXX.tgz is enabled at the end of the installation.
My question, i boot on 4.7 RELEASE, choose Install.
Is it possible to have an true automatic
Hi!
Setting up a firewall with 4.8, I was rather surprised
to see that I don get any logged info from the blocked
packets (beyond the fact that they were blocked).
I assume I am missing some silly little thing...
# tcpdump -n -e -ttt -i pflog0
tcpdump: listening on pflog0, link-type PFLOG
Nov
On Sun, Nov 14, 2010 at 06:27:38PM +0100, Johan Helsingius wrote:
Hi!
Setting up a firewall with 4.8, I was rather surprised
to see that I don get any logged info from the blocked
packets (beyond the fact that they were blocked).
I assume I am missing some silly little thing...
#
Greetings, I'm attempting to use an OBSD 4.8-stable machine as an NFS
server for storing snapshots from an ESXi 3.5 server. Unfortunately my
NFS performance seems relatively poor at about 55 Mbps (6 MBps). Both
machines are linked up at 1 Gbps via an HP ProCurve 1850G and I'm
writing to wd0.
On Sun, Nov 14, 2010 at 10:10 AM, OpenBSD Geek open...@e-solutions.re wrote:
Hi,
I read OpenBSD FAQ at
[url]http://www.openbsd.org/faq/fr/faq4.html#site[/url]
I understood well, that install.site/ Upgrade.site and of course
SiteXX.tgz is enabled at the end of the installation.
My question,
On 11/14/10 08:59, Kapetanakis Giannis wrote:
Hi,
I'd like to ask if anyone is using Adaptec 5805Z sata/sas raid
controller on OpenBSD.
Is this device tested/supported?
I guess not cause it's not mentioned anywhere on the man pages, aac(4)
etc or the supported hardware web page.
On 11/14/10 12:09, OpenBSD Geek wrote:
Hi,
I read OpenBSD FAQ at
[url]http://www.openbsd.org/faq/fr/faq4.html#site[/url]
I understood well, that install.site/ Upgrade.site and of course
SiteXX.tgz is enabled at the end of the installation.
My question, i boot on 4.7 RELEASE, choose
How can i test your 'redux' ?
I found that : http://www.hiqu.biz/
thanks for your replies
Cheers,
Wesley MOUEDINE ASSABY
www.mouedine.net
On Sun, 14 Nov 2010 11:31:52 -0700, Nick Bender nben...@gmail.com wrote:
On Sun, Nov 14, 2010 at 10:10 AM, OpenBSD Geek open...@e-solutions.re
wrote:
Hi,
The problem Occurred after I put up 4.8.
So far it has happened three times.
It occurs when I switch to console 1 then switched back to X, not every time
though
dmesg
usb0 Intel EHCI root hub rev 2.00/1.00 addr 1
ppb0 at pci0 dev 30 function 0 Intel 82801BA Hub-to-PCI rev 0x81
pci1 at ppb0 bus 1
-Message initial-
@: Joel Carnat j...@carnat.net;
Cc: misc@openbsd.org;
De: Philip Guenther guent...@gmail.com
Envoyi: dim. 14-11-2010 02:25
Sujet: Re: ldapd and self-signed certificate
On Sat, Nov 13, 2010 at 12:02 PM, Joel Carnat j...@carnat.net wrote:
I want to use LDAP
On 14 November 2010 20:06, Constantine A. Murenin muren...@gmail.comwrote:
indicator is not a smart sensor doesn't have a state like OK so
it's never monitored automatically; i think you'd have to specify low
and high values for it or something like that.
You can also use a shell script
*Si no visualizas correctamente este email da click **AQUI
http://publicoms.info/newphplist/lt.php?id=YUkBDAdRA1RUUxoHA0kABAMMAQc%3D
*
http://publicoms.info/newphplist/lt.php?id=YUkBDAdRA1RUUxoHA0kABAMMAQc%3D
Sabias que ahora existen 4 esquemas de facturaciC3n?
FacturaciC3n tradicional
SE VENDE, COMPLEJO APROBADO,
en el Balneario AGUAS DULCES del depto. de ROCHA.-
A 270 kilsmetros de la capital del pams, Montevideo.
A 9 kilsmetros de la ciudad de Castillos en el Departamento de Rocha.
1 casa y 6 cabaqas, terreno con galpsn y apartamento.-
A 2 cuadras de la playa.-
Greetings,
I'm trying to get OpenBSD running on a Fujitsu BX920 S2 server blade,
but ran into a wall trying to set up the network interfaces.
The server has two dual port Intel 82575 Gigabit Ethernet controllers,
as far as I could tell this chipset should be supported in em(4),
but ifconfig
22 matches
Mail list logo