Gentile Cliente,
Carta LIS h tenuta ad adempiere agli obblighi di adeguata
verifica della clientela disposti dal D. Lgs. 21/11/2007 n. 231
(Decreto Antiriciclaggio) pertanto Le chiediamo cortesemente di
fornirci le informazioni che seguono consapevole delle
responsabilit`, anche penali, nelle
Hi,
I have the following error :
Check DB config
DSN (write): NOT OK(MDB2 Error: connect failed)
Make sure that the configured database exists and that the user has write
privileges
DSN: mysql://roundcube:pass@localhost/roundcubemail
Using http://mailserver_ip/roundcubemail/installer/
I have
On Mon, Dec 05, 2011 at 12:03:25PM +0400, Wesley M. wrote:
Hi,
I have the following error :
Check DB config
DSN (write): NOT OK(MDB2 Error: connect failed)
Make sure that the configured database exists and that the user has write
privileges
DSN:
On 5/12/2011, at 9:03 PM, Wesley M. wrote:
Hi,
I have the following error :
Check DB config
DSN (write): NOT OK(MDB2 Error: connect failed)
Make sure that the configured database exists and that the user has write
privileges
DSN: mysql://roundcube:pass@localhost/roundcubemail
Try
Thank you very much. It works.
Except i can't connect to my imap server. :-(
I use dovecot. Ports are opened.
??
On Mon, 05 Dec 2011 21:15:08 +1300, Richard Toohey
richardtoo...@paradise.net.nz wrote:
On 5/12/2011, at 9:03 PM, Wesley M. wrote:
Hi,
I have the following error :
Check
On Mon, 05 Dec 2011 12:38:46 +0400
Wesley M. open...@e-solutions.re wrote:
Thank you very much. It works.
Except i can't connect to my imap server. :-(
I use dovecot. Ports are opened.
??
again, search your roundcube config file for 'localhost'
pattern, and replace it with 127.0.0.1.
Gentile Cliente,
Carta LIS h tenuta ad adempiere agli obblighi di adeguata
verifica della clientela disposti dal D. Lgs. 21/11/2007 n. 231
(Decreto Antiriciclaggio) pertanto Le chiediamo cortesemente di
fornirci le informazioni che seguono consapevole delle
responsabilit`, anche penali, nelle
Hi,
Thank you for your reply.
Already done. But still doesn't work.
I have connection error on imap server
I have 3 users created, with 3 2 domains hosted.
993, 143 dovecot ports (imaps,imap) listen OK.
?
On Mon, 5 Dec 2011 10:59:24 +0200, Gregory Edigarov
g...@bestnet.kharkov.ua wrote:
On
Gentile Cliente,
Carta LIS h tenuta ad adempiere agli obblighi di adeguata
verifica della clientela disposti dal D. Lgs. 21/11/2007 n. 231
(Decreto Antiriciclaggio) pertanto Le chiediamo cortesemente di
fornirci le informazioni che seguono consapevole delle
responsabilit`, anche penali, nelle
On 05.12.2011 11:56, Wesley M. wrote:
Hi,
Thank you for your reply.
Already done. But still doesn't work.
I have connection error on imap server
I have 3 users created, with 3 2 domains hosted.
993, 143 dovecot ports (imaps,imap) listen OK.
Do the IMAP server logs show even a connection
On Mon, Dec 5, 2011 at 11:56 AM, Wesley M. open...@e-solutions.re wrote:
Hi,
Thank you for your reply.
Already done. But still doesn't work.
I have connection error on imap server
I have 3 users created, with 3 2 domains hosted.
993, 143 dovecot ports (imaps,imap) listen OK.
?
Please,
# netstat -anf inet
Active Internet connections (including servers)
Proto Recv-Q Send-Q Local Address Foreign Address
(state)
tcp 0 0 *.993 *.*
LISTEN
tcp 0 0 *.143 *.*
LISTEN
in my /etc/dovecot/dovecot.conf
i added this line :
mail_location = mbox:/var/mail/%u
when i atempt to connect using webmail (roundcube) and do a tail -f
/var/log/maillog, i have :
Dec 5 15:45:19 mailserver dovecot: imap-login: Login: user=wesley,
method=PLAIN, rip=127.0.0.1, lip=127.0.0.1,
On Mon, 05 Dec 2011 15:47:23 +0400
Wesley M. open...@e-solutions.re wrote:
in my /etc/dovecot/dovecot.conf
i added this line :
mail_location = mbox:/var/mail/%u
when i atempt to connect using webmail (roundcube) and do a tail -f
/var/log/maillog, i have :
Dec 5 15:45:19 mailserver
Peter J. Philipp wrote, on 12/04/2011 08:06 AM:
Somehere inside ping6 the
return address is not checked with the outgoing address and it happily
accepts 2001:a60:f074::25 as a valid return address in my case.
That's a feature. Think about what would happen when pinging a multicast or an
I modified mail_location in dovecot.conf :
mail_location = mbox:~/mail:INBOX=/var/mail/%u
but still not working :-(
Have this in maillog :
Dec 5 16:22:53 mailserver dovecot: imap-login: Login: user=wesley,
method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=14593, secured
Dec 5 16:22:53
[IMAGE]
Estimado cliente,
Nos dirigimos a usted para informarle que su clave de operaciones BBVA
Net no ha sido cambiada y ha vencido el dia 05/12/2011. Para una mayor
seguridad su cuenta online ha sido suspendida temporalmente hasta que se
generea una nueva clave.
Con el fin de solucionar esta
http://ramov.com/doc/adsuck.html
Let me know if you notice anything amiss.
-Sime
On Mon, Dec 05, 2011 at 02:09:43PM +0100, Sime Ramov wrote:
http://ramov.com/doc/adsuck.html
Let me know if you notice anything amiss.
I'm sorry to say that but these howtos are totally useless.
When will it end? People following old stupid howtos instead
of reading man pages and official
i don't get why are you setting nameservers in resolv.conf since
dhclient will eventually override those?
On Mon, Dec 5, 2011 at 8:39 AM, Sime Ramov s...@ramov.com wrote:
http://ramov.com/doc/adsuck.html
Let me know if you notice anything amiss.
-Sime
The README in CVS has never let me down
http://www.openbsd.org/cgi-bin/cvsweb/ports/net/adsuck/pkg/README?rev=1.4;content-type=text%2Fx-cvsweb-markup
On Mon, Dec 5, 2011 at 2:09 PM, Andres Perera andre...@zoho.com wrote:
i don't get why are you setting nameservers in resolv.conf since
dhclient
I could think of a few reasons.
Someone might not know about existence of some software in which case it might
be useful to them.
Personal reference as I might forget some things after a long time.
Simple matter of sharing.
If everyone followed your advice there would be no internet.
I cannot
i don't get why are you setting nameservers in resolv.conf since
dhclient will eventually override those?
That's `/var/adsuck/files/resolv.conf`, not the main one.
On Mon, Dec 05, 2011 at 03:29:38PM +0100, ?ime Ramov wrote:
I could think of a few reasons.
Someone might not know about existence of some software in which case it might
be useful to them.
Personal reference as I might forget some things after a long time.
Simple matter of sharing.
In
afaik, _PATH_RESCONF is harcoded into the resolver functions
i guess adsuck ships with its own duplicated routines
On Mon, Dec 5, 2011 at 10:12 AM, E ime Ramov s...@ramov.com wrote:
i don't get why are you setting nameservers in resolv.conf since
dhclient will eventually override those?
Well, you could start by fixing your email configuration, every single
answer I sent to your emails has made it to the list, but bounced on
your address...
It is not my configuration which is broken. This is from the logs:
The domain name given in the EHLO command MUST be a primary host name.
Thank you for posting your tutorial.
I had done a video a while back and I should see about updating it, maybe.
http://www.youtube.com/watch?v=qb0vFFZVCrE
Please don't pay any attention to people who don't like your information,
they can choose to not read it.
Ideally people should look at the
On Mon, Dec 5, 2011 at 9:54 AM, Marc Espie es...@nerim.net wrote:
On Mon, Dec 05, 2011 at 03:29:38PM +0100, ?ime Ramov wrote:
I could think of a few reasons.
Someone might not know about existence of some software in which case it
might
be useful to them.
Personal reference as I
- Original Message -
From: Wesley M. open...@e-solutions.re
To: misc@openbsd.org
Sent: Monday, December 5, 2011 3:03:25 AM
Subject: roundcubemail packet
Hi,
I have the following error :
Check DB config
DSN (write): NOT OK(MDB2 Error: connect failed)
Make sure that the
Great job on your video! Too bad I can only enjoy it at work where I have
flash installed :(
Hmm, I though you were being sarcastic, turns out this is for real...
On Dec 5, 2011, at 4:28 PM, Daniel Villarreal wrote:
Thank you for posting your tutorial.
I had done a video a while back and I should see about updating it, maybe.
http://www.youtube.com/watch?v=qb0vFFZVCrE
Please don't
On Mon, Dec 05, 2011 at 10:32:50AM -0500, Daniel Villarreal wrote:
Mr. Espie, why do you presume that I'm only interested in official
OpenBSD documentation ?
Should I only read emails from Theo and the developers, then ?
B
I have totally nothing against 3rd party USEFUL
Hi,
First, thank you for your email.
I use it at work, a purchased version(75$) (allard mail server) : v4.7.6
I want to build my own mail server with sendmail, because, mailserv
doesn't work
on OpenBSD 5.0, for example :
there's no dovecot-sieve ; dovecot 2 is a big update; and especially
install
On Mon, Dec 5, 2011 at 10:48 AM, Marc Espie es...@nerim.net wrote:
On Mon, Dec 05, 2011 at 10:32:50AM -0500, Daniel Villarreal wrote:
Mr. Espie, why do you presume that I'm only interested in official
OpenBSD documentation ?
Should I only read emails from Theo and the developers,
I'm running an old copy of OpenBSD (4.1) on a production server and it
mounts a single NFS volume from another (Solaris) machine using NFS 3 tcp.
This mount worked initially, but then for a short period of time the remote
server had a problem, and I would see messages indicating that the
On 2011-12-05, ?ime Ramov s...@ramov.com wrote:
Great job on your video! Too bad I can only enjoy it at work where I have
flash installed :(
there are various ports/packages which can fetch these:
get_flash_videos
youtube-dl
yt
On 2011 Dec 05 (Mon) at 17:32:48 + (+), Stuart Henderson wrote:
:On 2011-12-05, ?ime Ramov s...@ramov.com wrote:
: Great job on your video! Too bad I can only enjoy it at work where I have
: flash installed :(
:
:
:there are various ports/packages which can fetch these:
:
:get_flash_videos
there are various ports/packages which can fetch these:
[snap]
I was being sarcastic. I thought he was, too.
Aderisci all' offerta ora.
SeparC( divisorio
Espositore Maranello
Corner espositore
SeparC( divisorio componibile e modulare, orientabile a piacere, con struttura
in alluminio anodizzato e basi in acciaio verniciato, rivestito con pannelli
in policarbonato opale neutro. Accessori per il
Michael Durket dur...@highwire.stanford.edu wrote:
I'm running an old copy of OpenBSD (4.1) on a production server and it
mounts a single NFS volume from another (Solaris) machine using NFS 3 tcp.
This mount worked initially, but then for a short period of time the remote
server had a
openbsd.mirror.frontiernet.net rsyncs from obsd.cec.mtu.edu and
thus the former doesn't have 5.0 either.
i don't have / didn't find any contact info for the maintainer
of the cec.mtu.edu mirror beyond 'cel...@mtu.edu' listed as the
contact for the AnonCVS service.
i sent an email to
I also sent a mail to chris. I think he's pretty busy right now.
You can use:
**
rsync://mirror.planetunix.net/OpenBSD/
and use multiple --exclude meanwhile.
On Mon, Dec 5, 2011 at 11:38 PM, jared r r spiegel j...@ice-nine.orgwrote:
openbsd.mirror.frontiernet.net rsyncs from obsd.cec.mtu.edu
On Dec 05 08:28:15, Michael Durket wrote:
I'm running an old copy of OpenBSD (4.1) on a production server and it
mounts a single NFS volume from another (Solaris) machine using NFS 3 tcp.
This mount worked initially, but then for a short period of time the remote
server had a problem, and
On 12/05/2011 01:38 PM, jared r r spiegel wrote:
openbsd.mirror.frontiernet.net rsyncs from obsd.cec.mtu.edu and
thus the former doesn't have 5.0 either.
whoops.
Sorry 'bout that. set up fivezero, forgot ftp
Should be working now...
Nick.
Mr. Eric Oyen is blind. He cannot see the keyboard and makes occasional
mistakes. Had you ever read or subscribed to the OpenBSD powerpc mailing lists,
you would know this.
--- On Thu, 12/1/11, Neal Hogan nealho...@gmail.com wrote:
From: Neal Hogan nealho...@gmail.com
Subject: Re: Narcicism?
You have another G3?
--- On Fri, 12/2/11, Eric Oyen n7...@hotmail.com wrote:
From: Eric Oyen n7...@hotmail.com
Subject: Re: Narcicism?
To: misc misc@openbsd.org
Date: Friday, December 2, 2011, 8:15 AM
so true.
on another note, I recently had some help getting linux up and working on a
macbook
On Dec 5, 2011, at 11:20 AM, Jan Stary wrote:
On Dec 05 08:28:15, Michael Durket wrote:
I'm running an old copy of OpenBSD (4.1) on a production server and it
mounts a single NFS volume from another (Solaris) machine using NFS 3 tcp.
This mount worked initially, but then for a short
On Dec 5, 2011, at 1:12 PM, Jan Stary wrote:
On Dec 5, 2011, at 11:20 AM, Jan Stary wrote:
On Dec 05 08:28:15, Michael Durket wrote:
I'm running an old copy of OpenBSD (4.1) on a production server and
it
mounts a single NFS volume from another (Solaris) machine using NFS 3
tcp.
This
Even 'umount -f' doesn't unmount it?
On Dec 05 13:06:14, Michael Durket wrote:
Yes - that fails as well.
What kind of problem was there at the server?
I don't remember at this point - it was a long time ago - our Solaris NFS
servers are very flaky.
(Could the connections to
Greetings Sime,
How many of these boards are you considering? There are some
wicked-dense
low-power cpu cluster solutions out there...
Chris
On 30Nov2011, at 08.27, Sime Ramov wrote:
Hello, I am looking for something in the spirit of Soekris boards, but
more suited for
Having some issues with -current.
This line in pf.conf:
match out on $ext_if from my_net to any nat-to $ext_ad0
Generates the following error:
# pfctl -n -f /etc/pf.conf
/etc/pf.conf:41: af-to is not supported on match rules
/etc/pf.conf:41: skipping rule due to errors
/etc/pf.conf:41: rule
You're right that I had an outdated BIOS, which I've now updated, but
upon further review I don't think that is/was the culprit. I've since
had the issue re-surface and this time I noticed many lines like this
in the dmesg (not sure how I missed it before):
WARNING: mclpools limit reached;
easy there pardoner! :)
I think he was pointing out my spelling error in jest.
anyway, go easy on him as he probably didn't know (and I make it a point not
to call attention to my disability, except where it becomes necessary).
so, how is school going?
-eric
On Dec 5, 2011, at 2:04 PM, Super
On Tue, Dec 6, 2011 at 4:13 AM, Eric Oyen eric.o...@gmail.com wrote:
easy there pardoner! :)
I think he was pointing out my spelling error in jest.
anyway, go easy on him as he probably didn't know (and I make it a point not
to call attention to my disability, except where it becomes
On Dec 05 14:23:08, Michael Durket wrote:
Hm. Can you make a ktrace(1) of that 'umount -f'?
6267 ktrace RET ktrace 0
6267 ktrace CALL execve(0x7f7d5d0f,0x7f7d5858,0x7f7d5878)
6267 ktrace NAMI /sbin/umount
6267 umount EMUL native
6267 umount RET
55 matches
Mail list logo
