Ok, please stop that now. Those pseudo-witty replies are getting quite
annoying.
Thanks.
Look at http://www.armorlogic.com/oscl/. There is an dmesg for
e326m/SCSI version.
To answer your question. Don't create any kind of logical volume
(RAID0/1), just use the physical disks. In short, IM (integrated
mirroring) is _not_ supported. It is, however, being worked on.
My e326m/SCSI
[IMAGE]
Cher(e) client(e) de la Banque National
Le dipartement de virification comptable de la Banque Nationale a ditecti
un problhme de transaction dans votre compte. Un montant a iti diposi et
retiri par notre systhme comptable. Nous vous avisons de cette erreur
afin que vous ne soyez pas
Anyone following current had to compile GD from ports? I'm using it on a
server that only generates graphics through PHP/GD, no X11 installed. It
seems that from 3.9 on, X11 it's a requirement for GD 2.x.
Is that going to change? There's a way to use GD 1.8.x (from OpenBSD 3.8
ports) on
On 2006/02/09 06:20, RV Tec wrote:
Anyone following current had to compile GD from ports? I'm using it on a
server that only generates graphics through PHP/GD, no X11 installed.
If you just want PHP/GD, don't install the GD port, just the
GD extension for PHP, and build the NO_X11 flavour. No
On 2006/02/08 21:41, Dave Feustel wrote:
Tonight, looking for info on cat food, I may have found a
cia front company(Just Kidding!!!). When I enter pet-grub.com in the
Konqueror location bar, Konqueror is redirected to
https://comm.cia.gov/cgi/comment_form.cgi before
the webpage for
Dasn Clainst wrote:
On Wed, Feb 08, 2006 at 01:59:17PM +0100, Hannah Schroeter wrote:
[...]
/sys/sys/systm.h:170: warning: conflicting types for built-in function
`vsnprintf'
[...]
Have you properly updated gcc?
IIRC there have been quite some changes wrt types and in the
instructions for
[IMAGE]
[IMAGE]
Borghi Toscani | E - mail | Registrati | Inserisci un locale | Meteo |
News
[IMAGE]
NUOVI
INSERIMENTI
Newsletter della 7B0 settimana 2006
LINK
CONSIGLIATI
Il Belvedere
LAST MINUTE IN TOSCANA
OFFERTE SOGGIORNI IN TOSCANA
OFFERTE LAST MINUTE FIRENZE
Last Minute Abetone
Hello -
I am currently at the end of my understanding. We have PF working
between two Ethernet cards perfectly - we have absolutely no problems
with it coming up properly and running as needed. What I am having a
problem with is when we use PPP to establish a connection to an ISP via
a dialup
On 2/9/06, Brian Shackelford [EMAIL PROTECTED] wrote:
! sh -c pfctl -e -f /etc/pf.conf
You could use the (ppp0) syntax and enable pf by default instead. That
way, it will deal with the address as it is present on the ppp0
interface. At the same time, it will keep the rest of your networks
I've been searching for a long time, for a usable laptop to dedicate to
OpenBSD usage and after trawling the archives, it looks like IBM
Thinkpads are a good bet for OpenBSD. I'm looking for something with
wired network connectivity and I don't care for wireless. CPU speed, RAM
and drive space
Dave Feustel wrote:
It looks like there may still be a few security holes to be
dealt with.
no, they are called backdoors, through which all who are sick of you
play their dirty tricks.
I've started running apache webserver. My web address
(until the next power failure) is 71.97.182.5.
On 2006/02/09 15:37, Craig M wrote:
I've been searching for a long time, for a usable laptop to dedicate to
OpenBSD usage and after trawling the archives, it looks like IBM
Thinkpads are a good bet for OpenBSD. I'm looking for something with
wired network connectivity and I don't care for
Sorry people.
I should have stated that I'm after something really cheap, hence why I
don't expect much power or features out of it. So I'd like a used laptop
of say 300MHz or better with 64MB or better and wired networking.
I don't like eBay, as I've had too many bad experiences with them and
Hello,
I'm trying to play around with OpenBGP 3.8 communities and I'd like to define
several communities depending on the peers. When I set communities this way :
match to any set community x:10
match to any set community x:20
Only x:20 will be set. Each set statement wipes out previous
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
Here's one I haven't run into before...
OpenBSD 3.9-beta running on AMD64
CVS update today with a complete 'make build' as of 20 minutes ago.
On connection _to_ the box via SSH, the initial logon seems to work,
but then the SSH daemon drops the
On Thu, Feb 09, 2006 at 04:06:42PM +0100, Sylvain Coutant wrote:
Hello,
I'm trying to play around with OpenBGP 3.8 communities and I'd like to
define several communities depending on the peers. When I set
communities this way :
match to any set community x:10 match to any set community
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
That helped some...
Got all the way to:
OpenBSD 3.9-beta (GENERIC) #0: Thu Feb 9 09:29:52 MST 2006
Welcome to OpenBSD: The proactively secure Unix-like operating system.
Please use the sendbug(1) utility to report bugs in the system.
Before
Hello,
I have the following error after pkg_add gnucash-1.8.11p1.tgz from
snapshots on an i386
ERROR: In procedure dynamic-link:
ERROR: file: libgw-gnc, message: Cannot load specified object
Thank you,
rogern
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
No dice.
This is starting to look OS level.
Further testing is that (just for grins) I turned up the httpd
server with it's default config.
1-2 page browses are no problem. Somewhere between the 3rd and 5th
refresh, the server sends RST packets
On 2006/02/09 11:37, B.O.F.H. wrote:
pf is not enabled, so I don't _think_ that's the culprit. But it's
something inbound/network related since _outbound_ connections from
the system work consistently and without resetting themselves.
What network devices (nat, firewall, routers etc) do you
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
Network card:
Marvell Yukon 88E8001/8003/8010, rev 0x13, Marvell Yukon Lite (0x9)
using the sk0 driver.
It has an associated PHY of: Marvell Yukon 88E1011 Gigabit PHY, rev.
5 using the eephy0 device.
It's attached to port 2 of a Cisco 3524 10/100
On Tue, Feb 07, 2006 at 08:56:10PM -0500, Dave Feustel wrote:
I found the entry 10.0.3.15:0 in my .Xauthority file via the xauth list
command.
Assuming that I did not add that entry to the file, how might it have been
added?
Your box may have had that IP at some point?
There is a feature in 3.8 that let you only set one community per AS.
This is fixed in -current.
OK.
BTW, how one could remove community tags ?
BR,
--
Sylvain COUTANT
ADVISEO
http://www.adviseo.fr/
http://www.open-sp.fr/
Hello all,
I'm having some issues with bge on sun v40z systems with OpenBSD/amd64
3.8-stable
and -current, SMP and UP.
dmesg snippet:
bge0 at pci2 dev 2 function 0 Broadcom BCM5703X rev 0x02, BCM5703 A2
(0x1002): apic 5 int 1 (irq 5) address [snip correct mac addr]
brgphy0 at bge0 phy 1: BCM5703
On Wed, Feb 08, 2006 at 11:20:42AM -0500, Valery Kobrin wrote:
Hi everybody,
The problem is not directly with obsd installed on scsi disk (fujitsu,
mas3735np, 73.4gb, 15,000rpm). Initially, the only system installed on it
was Win XP Pro, but it was infected and I installed obsd 3.6 over
On 2006/02/09 12:24, B.O.F.H. wrote:
Network card:
Marvell Yukon 88E8001/8003/8010, rev 0x13, Marvell Yukon Lite (0x9)
using the sk0 driver.
It has an associated PHY of: Marvell Yukon 88E1011 Gigabit PHY, rev.
5 using the eephy0 device.
It's attached to port 2 of a Cisco 3524 10/100
On Wed, Feb 08, 2006 at 10:06:17PM +0100, Jonathan Glaschke wrote:
On Sun, Feb 05, 2006 at 01:46:19PM +0100, Alexandre Anriot wrote:
Hello,
sometimes when i type a key under x, it gets repeated and repeated and
so on. Sometimes i can stop this repeating by pressing the key again.
On Thu, Feb 09, 2006 at 09:08:29PM +0100, Sylvain Coutant wrote:
There is a feature in 3.8 that let you only set one community per AS.
This is fixed in -current.
OK.
BTW, how one could remove community tags ?
Have a look at the cvs log:
-
Implement set community delete 65001:* and
Srebrenko Sehic wrote:
Look at http://www.armorlogic.com/oscl/. There is an dmesg for
e326m/SCSI version.
To answer your question. Don't create any kind of logical volume
(RAID0/1), just use the physical disks. In short, IM (integrated
mirroring) is _not_ supported. It is, however, being worked
syslog.conf:
# Keep a copy of all logging in a 32k memory buffer named debug
*.debug :32:debug
#pkill syslogd; syslogd -s /var/run/syslogd.sock
#logger This is a test
#syslogc -s /var/run/syslogd.sock debug
No such log
I have done
Some more information I should have put in the initial post:
I saw this in OpenBSD/amd64 3.7, so it's not a recent change that did this.
After pxeboot, the link status is always no carrier, even when the
link should be
up (gigabit auto). What I meant by dhclient fails is that it
reports no
On 09/02/06, Craig M [EMAIL PROTECTED] wrote:
Sorry people.
I should have stated that I'm after something really cheap, hence why I
don't expect much power or features out of it. So I'd like a used laptop
of say 300MHz or better with 64MB or better and wired networking.
I don't like eBay,
On Thu, Feb 09, 2006 at 09:29:38PM +0100, Joachim Schipper wrote:
On Wed, Feb 08, 2006 at 10:06:17PM +0100, Jonathan Glaschke wrote:
On Sun, Feb 05, 2006 at 01:46:19PM +0100, Alexandre Anriot wrote:
Hello,
sometimes when i type a key under x, it gets repeated and repeated
and
so
So what's the best? Why?
I have the thinkpad r50e. Cheap and featureful. Less than half the price of
most laptops. The only unsupported hardware in it I have found so far is the
power management. But that could change.
Also were you aware of this page?
http://www.openbsd.org/i386-laptop.html
On Fri, 10 Feb 2006, Jonas Davidsson wrote:
syslog.conf:
# Keep a copy of all logging in a 32k memory buffer named debug
*.debug :32:debug
#pkill syslogd; syslogd -s /var/run/syslogd.sock
This is wrong. Look at the options that
On Fri, Feb 10, 2006 at 12:37:12AM +0100, Jonathan Glaschke wrote:
On Thu, Feb 09, 2006 at 09:29:38PM +0100, Joachim Schipper wrote:
On Wed, Feb 08, 2006 at 10:06:17PM +0100, Jonathan Glaschke wrote:
On Sun, Feb 05, 2006 at 01:46:19PM +0100, Alexandre Anriot wrote:
Hello,
I am trying to generate a new release incorporating the two recent
patches that I can then install on a number of other machines.
I have one system with all the sources and have successfully built and
installed the new kernel. Following the instruction in man release I am
now trying to generate
Damien Miller wrote:
On Fri, 10 Feb 2006, Jonas Davidsson wrote:
syslog.conf:
# Keep a copy of all logging in a 32k memory buffer named debug
*.debug :32:debug
Works for me. Maybe you have spaces instead of tabs in your syslog.conf?
On 2006/02/10 01:50, Joachim Schipper wrote:
I'll be trying startx sleep 5 exit for a bit.
How about 'exec startx'?
Brian Shackelford wrote:
We have /etc/ppp/ppp.linkup and in that is a section like this:
! sh -c pfctl -e -f /etc/pf.conf
My ppp.linkup has this:
! sh -c /sbin/pfctl -ef /etc/pf.conf
and it works.
--- Brian Shackelford [EMAIL PROTECTED] wrote:
Hello -
I am currently at the end of my understanding. We have PF working
between two Ethernet cards perfectly - we have absolutely no problems
with it coming up properly and running as needed. What I am having a
problem with is when we
Hi Russel,
It looks like /mnt is mounted read only. If this is changed, it should work.
HTH,
Eric Buchanan
El Jue 09 Feb 2006 05:13 PM, Russell Fulton escribis:
I am trying to generate a new release incorporating the two recent
patches that I can then install on a number of other machines.
That would be
xset r off
not b. that's for beep.
-Ober
Richard Chesler: [Reading a piece of paper] The first rule of Fight Club is you
don't talk about Fight Club?
Narrator: [Voice-over] I'm half asleep again; I must've left the original in
the copy machine.
Richard Chesler: The second rule
Greetings,
I'm having trouble getting pppoe(4) to establish a connection from my
OpenBSD 3.7 RELEASE (+ errata patches) box to my ISP through a Netgear
DG632 in bridge mode. I can successfully establish a connection using
pppoe(8) although it is a bit hit-and-miss. The in-kernel pppoe(4) is
not
Dear All,
Can you give me a link HOWTO/FAQ/tutorial to create a NIS
server/client on OpenBSD.
thanks
b.s
OK, before I get a deluge of well-meaning people on and off list
telling me I inadvertently revealed my ISP authentication details,
I've already realised this and they have now been changed *blushes a
very deep shade of purple* For those who have/were going to let me
know, thanks for the thought!!
Your logo here
PuroRock.com - Lo mejor del Rock!
9 de Febrero 2006
Eventos Especiales PuroRock
Gabriel Meza
Editor
PuroRock
AUSPICIADORES
MisRolas.com
[IMAGE]
MIGUEL RIOS EN EL RIO EN SAN JOSE
[IMAGE]
TRIBUTO A RAGE AGAINST THE MACHINE[IMAGE]
EVENTOS
Dia (mm/dd)
Evento
Descripcisn
1
On 10/02/06, Damon McMahon [EMAIL PROTECTED] wrote:
Greetings,
I'm having trouble getting pppoe(4) to establish a connection from my
OpenBSD 3.7 RELEASE (+ errata patches) box to my ISP through a Netgear
DG632 in bridge mode. I can successfully establish a connection using
pppoe(8) although
On 2/2/06, Mike Keller [EMAIL PROTECTED] wrote:
I would like to use an RSA / ACE server to
authenticate locally on 3.8 (through radius).
As Joachim pointed out, there is the generic login_radius authenticator.
login_radius works (most of the time) to authenticate against the remote RADIUS
50 matches
Mail list logo
