On 5/20/07, Dave Harrison <[EMAIL PROTECTED]> wrote:
Henning Brauer wrote:
> * Uv Pzaf <[EMAIL PROTECTED]> [2007-05-20 23:12]:
>> I wonder why OpenBSD packages (i.e. openldap-server-2.3.24.tgz) still
>> uses ldbm as database backend especially since the OpenLDAP folks are
>> stating that this is
> By all means experiment with flowcharts, but be prepared to move on: I
Like I said to someone else off list. Maybe flowcharts are not needed,
but I have a lecturer who believes in them and wants me to use them I my
assignments. So for a while I am simply forced to use the.
> if your code is so
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf
Of
> Anthony Howe
> Sent: 18 May 2007 07:00 PM
> Cc: misc@openbsd.org
> Subject: Re: flowcharts
>
> [EMAIL PROTECTED] wrote:
> > Thanks to those that responded. I have a few ideas.
> > Once i figure out how t
Henning Brauer wrote:
> * Uv Pzaf <[EMAIL PROTECTED]> [2007-05-20 23:12]:
>> I wonder why OpenBSD packages (i.e. openldap-server-2.3.24.tgz) still
>> uses ldbm as database backend especially since the OpenLDAP folks are
>> stating that this is no good any more:
>> (http://www.openldap.org/faq/data/
As some of you know, there is a hardware compatibility list at
http://www.armorlogic.com/oscl which provides information about
major/stock hardware and OpenBSD compatibility.
Some of the previously tested configuration are badly out-of-date or
are misinformative. Especially the configurations tha
* Uv Pzaf <[EMAIL PROTECTED]> [2007-05-20 23:12]:
> I wonder why OpenBSD packages (i.e. openldap-server-2.3.24.tgz) still
> uses ldbm as database backend especially since the OpenLDAP folks are
> stating that this is no good any more:
> (http://www.openldap.org/faq/data/cache/756.htm) and not bdb o
Jacob Yocom-Piatt wrote:
> i have tried han boetes' binary upgrade script but find
> mergemaster to be very cumbersome in light of the
> already-supplied upgrade patch.
You must be using a very old version. It now uses mergeslave which
creates a patch from the old and new etc tarballs and applies
I had the same thing happen earlier and i have tons of free space there , i
think this is a server problem at the main cvs server try one of the
mirrors instead, it worked for me.
On 5/20/07, Mikolaj Kucharski <[EMAIL PROTECTED]> wrote:
>
> Hi,
>
> From some time I have a problem updating sources
> "Steffen" == Steffen Sch|tz <[EMAIL PROTECTED]> writes:
Steffen> You can try "man ssh" and then search
Steffen> for the section "SSH-BASED VIRTUAL PRIVATE NETWORKS"
Beware TCP-over-TCP though, which is what these networks will necessarily be.
If you have bandwidth to spare, no biggy, but if
On May 20, 2007, at 5:02 PM, Darrin Chandler wrote:
On Sat, May 19, 2007 at 01:15:58PM -0600, Jack Woehr wrote:
Theo de Raadt wrote:
A HP XFP SR-optic 10GE module for a HP 3500yl switch which
already has
the 10Gb card installed. If anyone can help us with getting this to
us, we'd love it.
Y
On 2007/05/20 17:02, Darrin Chandler wrote:
> On Sat, May 19, 2007 at 01:15:58PM -0600, Jack Woehr wrote:
> > Theo de Raadt wrote:
> > >A HP XFP SR-optic 10GE module for a HP 3500yl switch which already has
> > >the 10Gb card installed. If anyone can help us with getting this to
> > >us, we'd love
On Sat, May 19, 2007 at 01:15:58PM -0600, Jack Woehr wrote:
> Theo de Raadt wrote:
> >A HP XFP SR-optic 10GE module for a HP 3500yl switch which already has
> >the 10Gb card installed. If anyone can help us with getting this to
> >us, we'd love it.
> >
> >Yes, we know they are very expensive. Bruta
Hi,
>From some time I have a problem updating sources from cvs. Below is an
example cvs session. The `No space left on device' problem was very
often for me durning last few months, but from today I cannot update
src and ports module at all. On target partition there is currently 1GB of
free space
On Sun, May 20, 2007 at 12:02:11PM -0700, Myk Taylor wrote:
> I used to have this problem as well. It went away when I upgraded the
> remote endpoint (your AP, in this model) to OpenSSH_4.5p1.
Okay. Thanks for the advice :)
I'll try to test it during the next couple of days or so and report back
I'm trying to run an Nvidia Nforce2-based board diskless. It's a Shuttle
MN31 with Athlon XP.
Following instructions in http://www.openbsdsupport.org for OpenBSD
Diskless setup, I setup a DHCP server, TFTP server, etc. I get pxeboot
downloaded via tftp but it seems Etherboot says "unable to
I discovered that arc(4) is support on OpenBSD/sparc64. Having never
used one of these cards, I am assuming that configuration is done in
basically the same way as most BIOS configured RAID cards. Is it
possible to configure a RAID 5 array on an i386 or amd64 box and then
move it to a sparc
On 5/20/07, Martin Toft <[EMAIL PROTECTED]> wrote:
On Sun, May 20, 2007 at 07:19:50PM +0200, Steffen Sch|tz wrote:
> You can try "man ssh" and then search
> for the section "SSH-BASED VIRTUAL PRIVATE NETWORKS"
>
> Steffen
Nice section actually -- I just used the trial and error way of getting
it
On Thu, May 17, 2007 at 10:02:43AM +0200, giovanni wrote:
> I was very curious about the implementation so I've read it.
> http://www.openbsd.org/cgi-bin/cvsweb/src/sys/arch/i386/i386/mp_setperf.c?rev=1.2&content-type=text/x-cvsweb-markup
> well I was wondering why is it necessary the splipi when
Darren Spruell wrote on 20/05/07 19:14:
> Have a read of "SSH-BASED VIRTUAL PRIVATE NETWORKS" in ssh(1).
thanks
i've checked ssh(d)_config, but have forgotten ssh and google didn't get it.
Regards
Julien
On Sun, May 20, 2007 at 09:37:41PM +0200, Jan Stary wrote:
> Do these messages mean that my graphic chip is actually
> capable of a "1024x768 24bbp" display?
No
> If the graphics chip can do 1024x768, is it the case that the
> _monitor_ cannot do that?
Yes
>Is the maximal resolution a property
>
Hi Jacob,
Jacob Yocom-Piatt wrote on Sun, May 20, 2007 at 12:27:01PM -0500:
> i expect that a number of you have scripts that automate most of the
> upgrade procedure and i would like it very much if someone were willing
> to share such a script. upgrading by hand a la the upgrade instructions
I wonder why OpenBSD packages (i.e. openldap-server-2.3.24.tgz) still
uses ldbm as database backend especially since the OpenLDAP folks are
stating that this is no good any more:
(http://www.openldap.org/faq/data/cache/756.htm) and not bdb or hdb.
By the way I'm just wondering i don't think i have
On Sun, 20 May 2007, Jan Stary wrote:
> Hi all,
>
> this comes form a verbose boot of 4.1 on a Dell Latitude LS laptop:
>
> [...]
> vesabios0 at mainbus0: version 2.0, NeoMagic MagicMedia 256 AV
> vesabios0: VESA mode 0100: attributes 009f, 640x400 8bbp Packed pixel
> vesabios0: VESA mode 0101:
On Sun, May 20, 2007 at 07:19:50PM +0200, Steffen Sch|tz wrote:
> You can try "man ssh" and then search
> for the section "SSH-BASED VIRTUAL PRIVATE NETWORKS"
>
> Steffen
Nice section actually -- I just used the trial and error way of getting
it right, as I hadn't discovered that section of the ma
Replying to myself,
> vesabios0 at mainbus0: version 2.0, NeoMagic MagicMedia 256 AV
> vesabios0: VESA mode 0118: attributes 009f, 1024x768 24bbp Direct Color
> vga0 at pci1 dev 0 function 0 "Neomagic Magicgraph NM2200" rev 0x20, vesafb
>
> Do these messages mean that my graphic chip is actually
Hi all,
this comes form a verbose boot of 4.1 on a Dell Latitude LS laptop:
[...]
vesabios0 at mainbus0: version 2.0, NeoMagic MagicMedia 256 AV
vesabios0: VESA mode 0100: attributes 009f, 640x400 8bbp Packed pixel
vesabios0: VESA mode 0101: attributes 009f, 640x480 8bbp Packed pixel
vesabios0: V
Hi,
I am currently revising a pair of openbsd routers we are running (and
btw running them quite happily for a while now!).
These routers have two interfaces, em0 and em1, which are each connected
to different switches (ie. em0 of both machines to switch1 and em1 to
switch2).
em0 hosts all u
On Sun, 20 May 2007, Bryan Vyhmeister wrote:
> Having searched through the archives and found a number of cvs entries related
> to FFS2, I was wondering if support is to the point where it can actually be
> tested or if it is still very much in progress. I noticed that options FFS2
> has been adde
i expect that a number of you have scripts that automate most of the
upgrade procedure and i would like it very much if someone were willing
to share such a script. upgrading by hand a la the upgrade instructions
goes relatively quickly but the number of machines under my supervision
keeps grow
On Sunday 20 May 2007 18:58, Julien TOUCHE wrote:
> i'm looking for how to setup vpn tunnel with ssh
> (capability announced with 4.3
> http://undeadly.org/cgi?action=article&sid=20060205165940)
>
> i didn't found any doc to established a complete vpn
>
You can try "man ssh" and then search
for t
On 5/20/07, Julien TOUCHE <[EMAIL PROTECTED]> wrote:
i'm looking for how to setup vpn tunnel with ssh
(capability announced with 4.3
http://undeadly.org/cgi?action=article&sid=20060205165940)
i didn't found any doc to established a complete vpn
so far, what i do:
- on server sshd_config, put "P
On Sun, May 20, 2007 at 06:58:30PM +0200, Julien TOUCHE wrote:
> i'm looking for how to setup vpn tunnel with ssh
> (capability announced with 4.3
> http://undeadly.org/cgi?action=article&sid=20060205165940)
>
> i didn't found any doc to established a complete vpn
>
you don;t mention whether you
i'm looking for how to setup vpn tunnel with ssh
(capability announced with 4.3
http://undeadly.org/cgi?action=article&sid=20060205165940)
i didn't found any doc to established a complete vpn
so far, what i do:
- on server sshd_config, put "PermitTunnel yes", restart ssh
- on client ssh_config, p
On Sat, 2007-05-19 at 21:56 +0200, Almir Karic wrote:
> anyone managed to get obsd to run as xen guest OS? care to share how?
You can install OpenBSD under XEN as an HVM guest. Performance will not be
particularly high and there are some quirks with console output.
> the only document i found is
On Fri, May 18, 2007 at 08:49:43PM +1000, Timothy Wilson wrote:
> On 17/05/07, dreamwvr <[EMAIL PROTECTED]> wrote:
> >Hey,
> > Anyone have any success getting the Dlink KVM to be recognized by
> >the os? The KVM console can switch to each system but there is no
> >keyboard control on any of the po
On Sat, May 19, 2007 at 07:04:19PM -0500, Mark Reitblatt wrote:
> On 5/19/07, Theo de Raadt <[EMAIL PROTECTED]> wrote:
> >> > Can you quote a specific US law that says so?
> >>
> >> There is no need. US Law defers the specific details to regulatory
> >> agencies. The ruling in Junger v. Daley confe
thus Mark Reitblatt spake:
On 5/19/07, Chris Bennett <[EMAIL PROTECTED]> wrote:
Theo de Raadt wrote:
>
> Yeah, right. Those of us looking from the outside do not have such
> simplistic views of the US, sorry.
>
> But our viewpoint is not purely about OpenBSD as open source. We
> make our code
Having searched through the archives and found a number of cvs
entries related to FFS2, I was wondering if support is to the point
where it can actually be tested or if it is still very much in
progress. I noticed that options FFS2 has been added to options(4)
which makes me think maybe it
On Sun, May 20, 2007 at 12:55:58PM +0200, Maurice Janssen wrote:
> >
> >why do you want to do this? spamd(8) says to use crontab.
>
> Yes, but the default is once per hour. So without the -b flag to
> spamd-setup in /etc/rc, the blacklisted hosts are not sent to the
> table in pf for quite some
On Saturday, May 19, 2007 at 22:46:29 +0100, Jason McIntyre wrote:
>On Fri, May 18, 2007 at 05:25:32PM -0500, Nick Templeton wrote:
>> Since when running spamd(8) in blacklisting mode requires
>> that spamd-setup(8) also be run with the "-b" option, should
>> /etc/rc (the system startup script) be
Do anyone have japanese fonts and input working on uxterm with
ports/inputmethods/uim/ ? I'd really like to know how you got it
working.
--
Mathieu Sauve-Frankel
Mark Reitblatt wrote:
(Sorry, forgot to reply-to-all)
On 5/19/07, Reiner Jung <[EMAIL PROTECTED]> wrote:
Hi,
the export regulations from the US government are very strict when
there is
any crypto code
developed in the US. Developed in the US is = developed from a developer
when he stay in
th
Hi,
On 07 05 19, lotr wrote:
> However, i didn't find any configuration sample on pf in the website.
> When i check the man page of hoststated, it stated that need to use
> rdr-anchor in pf.
> I have tried to put in the rdr-anchor in my pf.conf file, however, it
> doesn't work.
> If it do work, wi
spamd version for http?
Instead of just grepping the logs
and adding to the pf tables, and blocking,
love to redirect to a fake webserver and waste
their time also
Guess I could redirect their http(s) requests to spamd,
confuse the hell out their http client.. :)
Getting tired of seeing the
44 matches
Mail list logo
