Ya, right, it's my fault.
However, as usually, I exactly followed the instructions in the patch file:
=
This is version 2 of this patch.
Apply by doing:
cd /usr/src
patch -p0 001_openssl.patch
And then rebuild and install the
HI,
OK, for the archive of may be for an other unlucky sole that may be
loosing sleep over this like I did for the last two days.
I know it's not an OpenBSD specific subject, but never the less
countless google research, tests and some support emails that kept me
going deserved an archive
On Sun, May 03, 2009 at 08:06:36AM +0200, fre...@gmx.net wrote:
Ya, right, it's my fault.
Did your tree build before applying the diff? My guess is not, so check
and fix that before blaming the patch instructions.
-Otto
However, as usually, I exactly followed the instructions in the
Hi again,
What I need is some way of knowing more about the
connections going through to the real MTA, which
I do not have access to.
I already have spamd running on the OpenBSD firewall
but once a host is whitelisted, the ruleset makes
no redirection to spamd and the connections go
to the real
Hi,
So I have this sun blade 1000, which I have been running solaris 10 on
for a while now. As far as I know all hardware is fine.
I installed 4.5 from cd today and let X autodetect my hardware, which it
did correctly, finding and using my creator (elite 3d upa). However,
there seems to be some
Thans for your reply.
Le 2 mai 09 ` 10:59, ropers a icrit :
2009/5/1 dug d...@xgs-france.com:
0
1 #Allow SMTP, HTTPS
2 pass quick proto tcp from any to {public-ip mail-server} port
25
3 pass quick proto tcp from any to {public-ip mail-server} port
443
4 pass quick proto tcp from {public-ip
On Sat, 02 May 2009 21:26:05 -0600 Theo de Raadt
dera...@cvs.openbsd.org wrote:
Another way would be through creating/editing /etc/boot.conf and
having an entry for the mp kernel
ex: boot wd0a:/bsd.mp
where wd0a is your root partition.
I recommend against that.
Firstly, one
On Sun, May 3, 2009 at 10:14 AM, dug d...@xgs-france.com wrote:
Thans for your reply.
Le 2 mai 09 ` 10:59, ropers a icrit :
2009/5/1 dug d...@xgs-france.com:
0
1 #Allow SMTP, HTTPS
2 pass quick proto tcp from any to {public-ip mail-server} port
25
3 pass quick proto tcp from any to
On Sun, 3 May 2009 08:45:55 -0700
J.C. Roberts list-...@designtools.org wrote:
Thirdly, it should be removed. The new installer destined for 4.6
already does the right thing, so the i386\amd64 specific etc/boot.conf
hack is redundant and leads to confusion.
Hmm, how should I specify that I
Le 3 mai 09 ` 18:04, (private) HKS a icrit :
Setting the rule pass quick from any to any at the beginning of my
pf.conf file doesn't solve the problem.
I always have block on these packets
Logs of pftop tool :
pfTop: Up Rule 1-55/71, View: rules, Cache: 1
RULE ACTION DIR LOG Q
On Sun, 3 May 2009 18:15:16 +0200
Thomas Pfaff tpf...@tp76.info wrote:
On Sun, 3 May 2009 08:45:55 -0700
J.C. Roberts list-...@designtools.org wrote:
Thirdly, it should be removed. The new installer destined for 4.6
already does the right thing, so the i386\amd64 specific etc/boot.conf
On May 3, 2009, at 9:15 AM, Thomas Pfaff wrote:
On Sun, 3 May 2009 08:45:55 -0700
J.C. Roberts list-...@designtools.org wrote:
Thirdly, it should be removed. The new installer destined for 4.6
already does the right thing, so the i386\amd64 specific etc/
boot.conf
hack is redundant and leads
On Sun, 3 May 2009 08:45:55 -0700
J.C. Roberts list-...@designtools.org wrote:
Thirdly, it should be removed. The new installer destined for 4.6
already does the right thing, so the i386\amd64 specific etc/boot.conf
hack is redundant and leads to confusion.
Hmm, how should I specify
Any body know any thing about support any dev?
On Sun, 3 May 2009 09:39:23 -0700 Don Jackson don.jack...@gmail.com
wrote:
On May 3, 2009, at 9:15 AM, Thomas Pfaff wrote:
On Sun, 3 May 2009 08:45:55 -0700
J.C. Roberts list-...@designtools.org wrote:
Thirdly, it should be removed. The new installer destined for 4.6
already does the
Le dimanche 03 mai 2009 C 00:52 -0400, Daniel Ouellet a C)crit :
[...]
Then I did the image of the drive from the external broken one to the
new clean internal one.
dd if=/dev/rsd1c of=/dev/rwd0c bs=1m
And let that go. Took for ever and I had no clue of progress.
You can use Pipe
Daniel Ouellet wrote:
Then I did the image of the drive from the external broken one to the new
clean internal one.
dd if=/dev/rsd1c of=/dev/rwd0c bs=1m
And let that go. Took for ever and I had no clue of progress.
Hi Daniel,
Just a heads up, dd(1) prints progress information if it
Hi!
On Sun, May 03, 2009 at 11:00:02AM -0700, J.C. Roberts wrote:
[...]
On all archs, when you wish to boot to a different on-disk kernel you
cab do it either by copying/moving kernel file to /bsd, and/or
specifying the kernel file at boot time `boot /mybsd.custom.hack`
Rather set image ... so
Un week-end ` Paris pour vous diclarer...
Publiciti sans obligation de consultation riservie aux sociitis et aux
professionnels. Ce mail commercial est conforme ` la ligislation en vigueur et
aux dilibirations de la CNIL des 22 et 30 mars 2005 sur la prospection par
courrier
On 2009-05-03, David dunnoseriou...@gmail.com wrote:
Le dimanche 03 mai 2009 C 00:52 -0400, Daniel Ouellet a C)crit :
[...]
Then I did the image of the drive from the external broken one to the
new clean internal one.
dd if=/dev/rsd1c of=/dev/rwd0c bs=1m
And let that go. Took for ever
Honestly, if it isn't in the list of supported devices, it isn't supported yet.
That in mind, there's probably no better time than now to start
looking for any specifications for such devices, and lobbying
companies who haven't released them to do so.
On Mon, May 4, 2009 at 6:25 AM,
On Thu, 2009-04-30 at 21:57 +0200, Henning Brauer wrote:
# pfctl -si
Status: Enabled for 49710 days 04:40:06 Debug: Urgent
that really looks like userland and kernel out of sync or similiar. I
cannot reproduce that.
It happens when i start ntpd with -s to set the clock. The clock
the last wimax device i used with openbsd acted a lot like a dsl
modem. plug in to the ethernet port, get an address from dhcp, log in
to the management interface over http, configure settings like the ISP
said to... done. don't remember who made it though.
On Sun, May 3, 2009 at 4:36 PM, Aaron
* Luca Corti l...@fantacast.it [2009-05-04 00:40]:
On Thu, 2009-04-30 at 21:57 +0200, Henning Brauer wrote:
# pfctl -si
Status: Enabled for 49710 days 04:40:06 Debug: Urgent
that really looks like userland and kernel out of sync or similiar. I
cannot reproduce that.
It
Le dimanche 03 mai 2009 C 21:58 +, Stuart Henderson a C)crit :
On 2009-05-03, David dunnoseriou...@gmail.com wrote:
Le dimanche 03 mai 2009 C 00:52 -0400, Daniel Ouellet a C)crit :
[...]
Then I did the image of the drive from the external broken one to the
new clean internal one.
Indeed, that was my first impulse as well once I noticed that the drive
wouldn't mount under osx. Something is odd, however, with VirtualPC, and
though openbsd 4.4 installs just fine, it will not then boot. Even though
once I boot up the virtual machine using the CD, I can mount the newly
Hi all,
I have two HP DL380 G3 servers with two 36Gb SAS drives on it in a
hardware RAID 1 mirror using the inbuilt raid controller.
When I do an ls /path/filetabtab to get a possible match list, the
server disk subsystem hangs.
If I do ls /dev/tabtab it always hangs, keyboard does not
respond,
Hello there,
today i bought a Samsung Laptop Drive, 160GB, Model Number is HM160HC.
It came in a anti-static plastic bag together with a little leaflet.
Usually i don't read those, but today i did, and came across the
following paragraph:
Hybrid Disk Drive products are licensed for use only
I have just installed OpenBSD 4.5 on i386, and I am observing a problem
with fonts. It is most noticeable with the /x11/msttcorefonts port
installed.
The problem is that Bitstream Vera Serif is always being used instead of
any variant of Times. For example if I set firefox or gimp to use
Times
On Mon, May 04, 2009 at 03:47:41AM +, Matthew Szudzik wrote:
The problem is that Bitstream Vera Serif is always being used instead of
any variant of Times. For example if I set firefox or gimp to use
After a little investigation, I have discovered that this problem is
caused by the file
30 matches
Mail list logo
