Re: Compiling R from source
On 2012-02-05, richo wrote: > On 03/02/12 07:02 -0500, Richard Thornton wrote: >>Using OpenBSD 5 on an old sparc 64 sun blade, I am trying to compile R from >>source, downloaded from the cran-r website; >>The ./configure works, but make always fails. I realize that there is a R >>package available already but it is a 2008 version, and it has terrible >>graphics, anyone have a more recent port for sparc64? >> > > What is the error when make fails? What have you done to solve the issue? An updated port is being worked on in openbsd-wip on github.
Re: Compiling R from source
On 03/02/12 07:02 -0500, Richard Thornton wrote: >Using OpenBSD 5 on an old sparc 64 sun blade, I am trying to compile R from >source, downloaded from the cran-r website; >The ./configure works, but make always fails. I realize that there is a R >package available already but it is a 2008 version, and it has terrible >graphics, anyone have a more recent port for sparc64? > What is the error when make fails? What have you done to solve the issue? -- richo || Today's excuse: Root nameservers are out of sync http://blog.psych0tik.net [demime 1.01d removed an attachment of type application/pgp-signature which had a name of signature.asc]
Re: PF: table sync
On Feb 5, 2012, at 8:17 PM, Camiel Dobbelaar wrote: > On 5-2-2012 16:01, OSN | Marian Fischer wrote: >> Am 05.02.2012 11:32, schrieb Maxim Bourmistrov: >>> On Feb 5, 2012, at 10:47 AM, Otto Moerbeek wrote: >>> pfsync does not sync pf tables. >>> Exactly, but it would be nice to have. >>> >>> //maxim >>> >> Hi, >> >> you should also take a look at wolfermann.org/pftabled.html >> >> Maybe that works out for you ... > > Syncing pf tables with a userland daemon could definitely work. > > I'm not sure that pftabled is still maintained though. I reported a big > flaw to the author in 2010 and it was never fixed. > > > -- > Cam > "In-kernel" sync would be more elegant solution, a specially then everything is already in place. But I'll check this daemon out. //maxim
Re: fatal page fault with atheros ar9300
On Sun, Feb 5, 2012 at 11:30 AM, Delan Azabani wrote: > Hi, I'm trying OpenBSD for the first time, and have experienced issues > getting the installer to boot on my netbook. My netbook is a Toshiba > NB500 (part number PLL50A-00M00D) with an Intel Atom N550 CPU. As it > has no CD drive, I used PXE with the following two files: > > 5.0/amd64/pxeboot > 5.0/amd64/bsd.rd > > When booting the installer, I got a panic. The output visible on my > screen at the time of panic is as follows: > > START OUTPUT > acpiprt3 at acpi0: bus 9 (EXP3) > acpiprt4 at acpi0: bus -1 (EXP4) > acpiprt5 at acpi0: bus 17 (PCIB) > pci0 at mainbus0 bus 0 > bridge mem address conflict 0xf050/0x10 > pchb0 at pci0 dev 0 function 0 "Intel Pineview DMI" rev 0x02 > vga1 at pci0 dev 2 function 0 "Intel Pineview Video" rev 0x02 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > "Intel Pineview Video" rev 0x02 at pci0 dev 2 function 1 not > configured > "Intel 82801GB HD Audio" rev 0x02 at pci0 dev 27 function 0 not > configured > ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: msi > pci1 at ppb0 bus 5 > ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: msi > pci2 at ppb1 bus 7 > athn0 at pci2 dev 0 function 0 "Atheros AR9300" rev 0x01: apic 4 > int 17 > uvm_fault(0x80bc1970, 0x0, 0, 1) -> e > fatal page fault in supervisor mode > trap type 6 code 0 rip 8017dfd5 cs 8 rflags 10286 cr2 B 0 cpl > e rsp 80bf5890 > panic: trap type 6, code=0, pc=8017dfd5 > > The operating system has halted. > Please press any key to reboot. > B END OUTPUT B > > As the fault occurred right after the line beginning with "athn0", I > tried booting the installer again, after removing the wireless adapter > (it is Mini PCI Express), and the installer booted perfectly. Here is > some relevant output from the 'lspci' tool under Linux: > > START OUTPUT > 07:00.0 Network controller [0280]: Atheros Communications Inc. AR9300 > Wireless LAN adaptor [168c:0030] (rev 01) > B END OUTPUT B > > I hope that this information is helpful. If you need any more, please > let me know and I will be more than happy to help in any way I can. > Did you try to boot snapshot already? As with newer HW it's better to try newest system.
Re: PF: table sync
On 5-2-2012 16:01, OSN | Marian Fischer wrote: > Am 05.02.2012 11:32, schrieb Maxim Bourmistrov: >> On Feb 5, 2012, at 10:47 AM, Otto Moerbeek wrote: >> >>> pfsync does not sync pf tables. >> Exactly, but it would be nice to have. >> >> //maxim >> > Hi, > > you should also take a look at wolfermann.org/pftabled.html > > Maybe that works out for you ... Syncing pf tables with a userland daemon could definitely work. I'm not sure that pftabled is still maintained though. I reported a big flaw to the author in 2010 and it was never fixed. -- Cam
NAB alert !!!
- This mail is in HTML. Some elements may be ommited in plain text. - Protection Alert An attempt to access NAB Online Banking was denied 30mins ago: If you do not remember trying to access online banking, please select: That was NOT me National Australia Bank. All rights reserved. ..
TP X32 resume fails under 5.0-Release
Hi there,
i've installed 5.0-Release on TP X32 Pentium M 1,7 Ghz. Works fine, suspend
works via apm (after starting apmd), but resume fails. Under X and on the
console, the screen comes back, cursor is blinking an that's it. Pressing
ON/OFF forces a quick reaction and simply powers down. The latest release i
worked with was 4.6. Has this possibly something to to with the encrypted
softraid0 in combination with the CF card ???
ThX
Andri
--- snip dmesg ---
OpenBSD 5.0 (GENERIC) #43: Wed Aug 17 10:10:52 MDT 2011
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1.70GHz ("GenuineIntel" 686-class)
600 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,
SSE,SSE2,SS,TM,SBF,EST,TM2
real mem = 2146365440 (2046MB)
avail mem = 2101198848 (2003MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/22/05, BIOS32 rev. 0 @ 0xfd750,
SMBIOS rev. 2.33 @ 0xe0010 (57 entries)
bios0: vendor IBM version "1QET97WW (3.02 )" date 09/22/2005
bios0: IBM 2672P14
apm0 at bios0: Power Management spec V1.2
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xfd6e0/0x920
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdea0/272 (15 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #6 is the last bus
bios0: ROM list: 0xc/0x1 0xdc000/0x4000! 0xe/0x1
cpu0 at mainbus0: (uniprocessor)
cpu0: Enhanced SpeedStep 600 MHz: speeds: 1700, 1400, 1200, 1000, 800, 600
MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
io address conflict 0x5800/0x8
io address conflict 0x5808/0x4
io address conflict 0x5810/0x8
io address conflict 0x580c/0x4
pchb0 at pci0 dev 0 function 0 "Intel 82855PM Host" rev 0x03
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xd000, size 0x1000
ppb0 at pci0 dev 1 function 0 "Intel 82855PM AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M6" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
radeondrm0 at vga1: irq 11
drm0 at radeondrm0
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 11
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 11
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x81
pci2 at ppb1 bus 2
mem address conflict 0xb000/0x1000
mem address conflict 0xb100/0x1000
cbb0 at pci2 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xaa: irq 11
cbb1 at pci2 dev 0 function 1 "Ricoh 5C476 CardBus" rev 0xaa: irq 11
"Ricoh 5C552 Firewire" rev 0x02 at pci2 dev 0 function 2 not configured
em0 at pci2 dev 1 function 0 "Intel PRO/1000MT (82540EP)" rev 0x03: irq 11,
address 00:11:25:b4:ad:0b
ral0 at pci2 dev 2 function 0 "Ralink RT2561S" rev 0x00: irq 11, address
00:1f:d0:1c:46:eb
ral0: MAC/BBP RT2561C, RF RT2527
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0xb0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 6 device 0 cacheline 0x0, lattimer 0xb0
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x01: 24-bit
timer at 3579545Hz
pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x01: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0:
wd0: 16-sector PIO, LBA48, 238475MB, 488397168 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 disabled (no drives)
ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x01: irq 11
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR SDRAM non-parity PC2700CL2.5
spdmem1 at iic0 addr 0x51: 1GB DDR SDRAM non-parity PC2700CL2.5
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x01: irq 11,
ICH4 AC97
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
wdc2 at pcmcia1 func
Re: PF: table sync
Am 05.02.2012 11:32, schrieb Maxim Bourmistrov: On Feb 5, 2012, at 10:47 AM, Otto Moerbeek wrote: pfsync does not sync pf tables. Exactly, but it would be nice to have. //maxim Hi, you should also take a look at wolfermann.org/pftabled.html Maybe that works out for you ... -marian
Re: iwn firmware load fails in Sony VPCCA25FX
On Sat, 4 Feb 2012 21:17:44 +0200 Mihai Popescu wrote: > How did you install the firmware? > > I've run once in troubles with an iwi0 interface because I messed up > the .tgz firmware file unpack. I never used a laptop with wireless and > OpenBSD so I was not aware that I need to download some firmware > files. > I don't remember what exactly I did wrong, the files were there but I > got the same error with load. I saw the run of /usr/sbin/fw_update at > boot time. > I've deleted the firmware files that I've installed from /etc/firmware > and run this script by hand. Then it was fine for iwi to load. > Just ran that script and after a reboot the fixed address works fine. Thanks! -- Edward Ahlsen-Girard Ft Walton Beach, FL
Re: iwn firmware load fails in Sony VPCCA25FX
On Sat, 4 Feb 2012 21:17:44 +0200 Mihai Popescu wrote: > How did you install the firmware? > > I've run once in troubles with an iwi0 interface because I messed up > the .tgz firmware file unpack. I never used a laptop with wireless and > OpenBSD so I was not aware that I need to download some firmware > files. > I don't remember what exactly I did wrong, the files were there but I > got the same error with load. I saw the run of /usr/sbin/fw_update at > boot time. > I've deleted the firmware files that I've installed from /etc/firmware > and run this script by hand. Then it was fine for iwi to load. > I installed with the package tools. The good news: it's working now with DHCP. The bad news: I didn't make notes, so I don't remember exactly what MADE it work. I spent a bit of time running ifconfig iwn0 scan (and getting frustrated) both with and without debug. What made it work may have been specifying dhcp, because the other bad news is that assigning a fixed IPv4 address still does not work: ifconfig will report the address as bound to the interface, but the router shows the connection as being at 0.0.0.0. Works OK to get to things on my own subnet, but not so well otherwise. Failing hostname.iwn0 (sanitized) below signature. This hostname.iwn0 was generated using ifconfig commands. -- Edward Ahlsen-Girard Ft Walton Beach, FL nwid *** wpakey inet 192.168.0.235 255.255.255.0 NONE
-current OpenSMTPD enqueuer, lynx, luxury-part-deux.html
Hello,
following a link recently posted here, I noticed that the page
http://catb.org/~esr/writings/luxury-part-deux.html
opened with lynx(1) cannot be sent (``printed'') as e-mail.
Opening web pages with lynx and sending them to myself is a standard
procedure for me and - as far as I remember - never failed and does not
fail on me for any other web page I have tried.
While trying to avoid the problem I saved the page (lynx: ``print'',
``save to a local file'') and piped it to mail(1) with the same results.
Appending the lynx(1) dump of the page to this message makes it fail as
well (using mutt(1)).
Error seen within lynx(1)/mail(1)/mutt(1):
``sendmail: ferror: 1''
Error seen in smtpd logs:
``smtpd[4122]: a53d8814: from=, relay=1000@localhost
[IPv6:::1], stat=LocalError (500 5.0.0 Pipelining not supported)''
Can anyone reproduce? Help on avoiding it?
Thanks in advance, Marcus
Some info below:
$ grep -v -e "^#" /etc/mailer.conf
sendmail/usr/sbin/smtpctl
send-mail /usr/sbin/smtpctl
mailq /usr/sbin/smtpctl
makemap /usr/libexec/smtpd/makemap
newaliases /usr/libexec/smtpd/makemap
hoststat/usr/libexec/sendmail/sendmail
purgestat /usr/libexec/sendmail/sendmail
dmesg:
OpenBSD 5.1-beta (GENERIC) #144: Mon Jan 30 16:22:03 MST 2012
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Mobile Intel(R) Pentium(R) 4 - M CPU 2.00GHz ("GenuineIntel" 686-class)
2 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,
ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
real mem = 1072689152 (1022MB)
avail mem = 1045049344 (996MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/12/03, BIOS32 rev. 0 @ 0xfd7e0
apm0 at bios0: Power Management spec V1.2
pcibios0 at bios0: rev 2.1 @ 0xfd770/0x890
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdeb0/256 (14 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #6 is the last bus
bios0: ROM list: 0xc/0x1 0xdc000/0x4000! 0xe/0x1
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845 Host" rev 0x04
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xe000, size 0x400
ppb0 at pci0 dev 1 function 0 "Intel 82845 AGP" rev 0x04
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M7" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
radeondrm0 at vga1: irq 11
drm0 at radeondrm0
uhci0 at pci0 dev 29 function 0 "Intel 82801CA/CAM USB" rev 0x02: irq 11
uhci1 at pci0 dev 29 function 1 "Intel 82801CA/CAM USB" rev 0x02: irq 11
uhci2 at pci0 dev 29 function 2 "Intel 82801CA/CAM USB" rev 0x02: irq 11
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x42
pci2 at ppb1 bus 2
mem address conflict 0x5000/0x1000
mem address conflict 0x5100/0x1000
cbb0 at pci2 dev 0 function 0 "TI PCI1520 CardBus" rev 0x01: irq 11
cbb1 at pci2 dev 0 function 1 "TI PCI1520 CardBus" rev 0x01: irq 11
ath0 at pci2 dev 2 function 0 "Atheros AR5212" rev 0x01: irq 11
ath0: AR5213A 5.9 phy 4.3 rf5112a 3.6, FCC2A*, address 00:1b:b1:ab:74:c1
fxp0 at pci2 dev 8 function 0 "Intel PRO/100 VE" rev 0x42, i82562: irq 11,
address 00:09:6b:3f:67:a8
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0xb0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 6 device 0 cacheline 0x8, lattimer 0xb0
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801CAM LPC" rev 0x02: 24-bit timer
at 3579545Hz: SpeedStep
pciide0 at pci0 dev 31 function 1 "Intel 82801CAM IDE" rev 0x02: DMA, channel
0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0:
wd0: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: ATAPI 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801CA/CAM SMBus" rev 0x02: irq 11
iic0 at ichiic0
auich0 at pci0 dev 31 function 5 "Intel 82801CA/CAM AC97" rev 0x02: irq 11,
ICH3 AC97
ac97: codec id 0x41445348 (Analog Devices AD1881A)
ac97: codec features headphone, Analog Devices Phat Stereo
audio0 at auich0
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb1 at uhci1: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci2: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keybo
hola(
hola,misc este es un sitio de productos electrC3nicos, telC)fonos, cC!mara fotogrC!fica, ordenador portC!til, un reloj el precio es muy buena, el envCo es gratis s i t e: edl. com 2012-2-5
Re: specific X.org segmentation fault
Increase the limits in login.conf for the relevant login class; you'll need to logout and back in for them to take effect. You've hit both datasize and openfiles limits. On 2012-02-04, Mihai Popescu wrote: > I've run xxxterm from xterm on openbox this time, under some load > stress pages (many big pictures slideshow style, waiting with patience > for the pages to load). > There it pops an error after each set of aprox. 100 pages: > > $ xxxterm > xxxterm: config_parse: cannot open /home/uhmewrk/.xxxterm.conf: No > such file or directory > > GLib-ERROR **: gmem.c:170: failed to allocate 8518 bytes > Trace/BPT trap (core dumped) > > I've run xxxterm from gdb, and there is another message (sorry, I'm > not a gdb expert): > > (gdb) file xxxterm > Reading symbols from /usr/local/bin/xxxterm...(no debugging symbols > found)...done. > (gdb) run > Starting program: /usr/local/bin/xxxterm > xxxterm: config_parse: cannot open /home/uhmewrk/.xxxterm.conf: No > such file or directory > [New process 19921] > [New process 19921, thread 0x855c4400] > [New process 19921, thread 0x8a828c00] > > GLib-GIO-ERROR **: Creating pipes for GWakeup: Too many open files > > > Program received signal SIGTRAP, Trace/breakpoint trap. > [Switching to process 19921, thread 0x7c89f800] > 0x02e1930c in g_logv () from /usr/local/lib/libglib-2.0.so.2992.0 > > I will move on to another snapshot, to see if those can be reproduced.
Re: PF: table sync
On Feb 5, 2012, at 10:47 AM, Otto Moerbeek wrote: > pfsync does not sync pf tables. Exactly, but it would be nice to have. //maxim
fatal page fault with atheros ar9300
Hi, I'm trying OpenBSD for the first time, and have experienced issues getting the installer to boot on my netbook. My netbook is a Toshiba NB500 (part number PLL50A-00M00D) with an Intel Atom N550 CPU. As it has no CD drive, I used PXE with the following two files: 5.0/amd64/pxeboot 5.0/amd64/bsd.rd When booting the installer, I got a panic. The output visible on my screen at the time of panic is as follows: START OUTPUT acpiprt3 at acpi0: bus 9 (EXP3) acpiprt4 at acpi0: bus -1 (EXP4) acpiprt5 at acpi0: bus 17 (PCIB) pci0 at mainbus0 bus 0 bridge mem address conflict 0xf050/0x10 pchb0 at pci0 dev 0 function 0 "Intel Pineview DMI" rev 0x02 vga1 at pci0 dev 2 function 0 "Intel Pineview Video" rev 0x02 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) "Intel Pineview Video" rev 0x02 at pci0 dev 2 function 1 not configured "Intel 82801GB HD Audio" rev 0x02 at pci0 dev 27 function 0 not configured ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: msi pci1 at ppb0 bus 5 ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: msi pci2 at ppb1 bus 7 athn0 at pci2 dev 0 function 0 "Atheros AR9300" rev 0x01: apic 4 int 17 uvm_fault(0x80bc1970, 0x0, 0, 1) -> e fatal page fault in supervisor mode trap type 6 code 0 rip 8017dfd5 cs 8 rflags 10286 cr2 0 cpl e rsp 80bf5890 panic: trap type 6, code=0, pc=8017dfd5 The operating system has halted. Please press any key to reboot. END OUTPUT As the fault occurred right after the line beginning with "athn0", I tried booting the installer again, after removing the wireless adapter (it is Mini PCI Express), and the installer booted perfectly. Here is some relevant output from the 'lspci' tool under Linux: START OUTPUT 07:00.0 Network controller [0280]: Atheros Communications Inc. AR9300 Wireless LAN adaptor [168c:0030] (rev 01) END OUTPUT I hope that this information is helpful. If you need any more, please let me know and I will be more than happy to help in any way I can.
Re: PF: table sync
On Sun, Feb 05, 2012 at 10:39:59AM +0100, Tomas Bodzar wrote: > On Sat, Feb 4, 2012 at 8:56 PM, Maxim Bourmistrov > wrote: > > Hi misc@, > > > > my question is probably directed to devs working with/on PF. > > > > Is something like table sync is planed to implement in PF? > > > > eg: > > "table persist sync" would sync all entries to the remote peer, inc. > > tracking add/del to it. > > I think that you mean this one ;-) > > http://www.openbsd.org/cgi-bin/man.cgi?query=pfsync&apropos=0&sektion=0&manpath=OpenBSD+Current&arch=i386&format=html pfsync does not sync pf tables. -Otto > > > > > //maxim
Re: PF: table sync
On Sat, Feb 4, 2012 at 8:56 PM, Maxim Bourmistrov wrote: > Hi misc@, > > my question is probably directed to devs working with/on PF. > > Is something like table sync is planed to implement in PF? > > eg: > "table persist sync" would sync all entries to the remote peer, inc. > tracking add/del to it. I think that you mean this one ;-) http://www.openbsd.org/cgi-bin/man.cgi?query=pfsync&apropos=0&sektion=0&manpath=OpenBSD+Current&arch=i386&format=html > > //maxim
