Hi,
just noticed on cvs@ that Theo has activated pre-orders for 5.5.
I did so right away.
@Theo and the other devs: THANK YOU for your continued efforts to make
this fine OS even better!
Cheers,
STEFAN
* Maxim Khitrov m...@mxcrypt.com [2013-12-22 18:44]:
On Fri, Dec 20, 2013 at 4:11 PM, Maxim Khitrov m...@mxcrypt.com wrote:
I was under the impression that the packet priority was always set to
3 prior to the pf ruleset evaluation (ignoring VLAN and CARP for a
moment), and that 'set prio'
I tried an Edimax USB Ethernet adapter on my -current system. It
attaches as ugen1 but not as axen0:
ugen1 at uhub3 port 2 ASIX Elec. Corp. AX88179 rev 2.10/1.00 addr 3
According to axen(4) this device should be supported. But config does not
find axen. Is this becaus usb is handled differently
On 27/03/14 3:40 AM, Remi Locherer wrote:
I tried an Edimax USB Ethernet adapter on my -current system. It
attaches as ugen1 but not as axen0:
ugen1 at uhub3 port 2 ASIX Elec. Corp. AX88179 rev 2.10/1.00 addr 3
According to axen(4) this device should be supported. But config does not
find
On 2014-03-26, Michael Lackner michael.lack...@unileoben.ac.at wrote:
As for the other posts: Installing ffmpeg as a package can be done, but x264
would refuse
to link against it.
Could that be something as simple as needing to include -L/usr/local/lib
in LDFLAGS when configuring x264?
On 03/26/14 07:03, Wong Peter wrote:
Dear all,
I had bought a Netgear WG311T Atheros Chipset. The Openbsd kernel(dmesg)
shows this card as ath0.
Therefore, I try to configure it using /etc/hostname.ath0 with content
below:
inet 192.168..5.1 255.255.255.0 none media autoselect mediaopt hostap
I am attempting to run foswiki on OpenBSD. Things are installed and i am
able to open /bin/Configure page of foswiki configuration screen. but the
page reports few errors, complaining that following files are either not found
or outdated and new versions are required.
The Files are : grep, rcs,
On 2014-03-27 Thu 14:12 PM |, jignesh desai wrote:
I am attempting to run foswiki on OpenBSD. Things are installed and i am
able to open /bin/Configure page of foswiki configuration screen. but the
page reports few errors, complaining that following files are either not found
or outdated and
On 03/27/14 06:12, jignesh desai wrote:
I am attempting to run foswiki on OpenBSD. Things are installed and i am
able to open /bin/Configure page of foswiki configuration screen. but the
page reports few errors, complaining that following files are either not found
or outdated and new versions
Hi Fred,
No I have modifided config and Unchrooted it.
After which i am
successfully able to run http://localhost/foswiki/bin/configure page.
and
its this page that reports error about wrong file versions.
therefore i
wish to update those files to latest versions. The Files are : grep,
jignesh desai said:
Hi Fred,
?
No I have modifided config and Unchrooted? it.
?
After which i am
successfully able to run? http://localhost/foswiki/bin/configure page.
and
its this page that reports error about wrong file versions.
?
therefore i
wish to update those files to latest
Hi,Dmitrij
Any advice what to type in Pkg_add .. ??? command to install
GNU stuff ?
Regards
From: Dmitrij D.
Czarkoff czark...@gmail.com
To: jignesh desai jigs_de...@yahoo.com
Cc:
Fred open...@crowsons.com; misc@openbsd.org misc@openbsd.org
Sent:
On 03/27/14 10:41, jignesh desai wrote:
Hi Fred,
No I have modifided config and Unchrooted it.
After which i am successfully able to run
http://localhost/foswiki/bin/configure page.
and its this page that reports error about wrong file versions.
therefore i wish to update those files to latest
On 03/27/14 12:23, Wong Peter wrote:
Hi Fred,
There is no output display to the console. It cannot become hostap.
Please help.
dmesg and output of /sbin/ifconfig ath0 would help debug this.
cheers
Fred
jignesh desai said:
Any advice what to type in Pkg_add .. ??? command to install GNU stuff ?
Here is the best advice on the topic:
man pkg_add
If you want to get anywhere, you *must* read manuals. You may
accidentally install and run foswiki (or whatever else) without getting
familiar with
Dear all,
The Linksys wmp54g v4.1 is not support on Openbsd 4.1. Previously, it is
working but it is not working after few years.
Any reason for this ?
Please help.
Thanks.
--
Linux
I'm in need of setting up several OpenBSD servers at remote locations.
Each one will have a two-disk softraid(4) RAID 1 with as much as
possible of application data encrypted. The machines will mainly be
serving very large mysql databases, nginx/httpd, transmission and
owncloud.
Since none of the
On 03/27/14 14:37, Erling Westenvik wrote:
That means that encrypted data, which would typically reside in
/var/mysql, /var/www, and /var/transmission, must reside on volumes that
can be unlocked and mounted separately. However, I cannot in advance
predict which service will outgrow others
- Original Message -
On 03/26/14 16:59, Charlie Farinella wrote:
I'm trying to install OpenBSD 5.4 on a Dell Vostro 400, it's
several
years old but not ancient. 4GB RAM, 250GB Seagate ST3250310AS hard
drive. The installation goes normally until it tries to find the
hard drive
TdR ... placing openssl there is not part of any solution that would work.
TdR What are other possible solutions?
Do you think sftp would fit? Can you replace ftp with sftp?
I'd prefer to maintain a limited access sftp server rather than a http
one.
Wow. No.
On Thu, Mar 27, 2014 at 08:10:05AM -0600, Theo de Raadt wrote:
TdR ... placing openssl there is not part of any solution that would
work.
TdR What are other possible solutions?
Do you think sftp would fit? Can you replace ftp with sftp?
I'd prefer to maintain a limited
Hello Theo,
Wednesday, March 26, 2014, 3:18:59 PM, you wrote:
TdR ... placing openssl there is not part of any solution that would work.
TdR What are other possible solutions?
Do you think sftp would fit? Can you replace ftp with sftp?
I'd prefer to maintain a limited access sftp server
On Thu, Mar 27, 2014 at 08:10:05AM -0600, Theo de Raadt wrote:
TdR ... placing openssl there is not part of any solution that would work.
TdR What are other possible solutions?
Do you think sftp would fit? Can you replace ftp with sftp?
I'd prefer to maintain a limited access sftp
On Thu, Mar 27, 2014, at 09:14 AM, Jiri B wrote:
On Thu, Mar 27, 2014 at 08:10:05AM -0600, Theo de Raadt wrote:
TdR ... placing openssl there is not part of any solution that would
work.
TdR What are other possible solutions?
Do you think sftp would fit? Can you replace ftp
So I sent a long mail yesterday explaining this, and that's the best you
two can do? How do you even retain jobs??
Dramatic arts class on elementary school :D
j.
On 2014-03-27 Thu 19:47 PM |, jignesh desai wrote:
?
Any advice what to type in Pkg_add .. ??? ? command to install
GNU stuff ?
There are other wikis already ported come with specific instructions
on how to use them on OpenBSD.
If you have the ports tree installed, do this:
$ cd /usr/ports
Em 27-03-2014 11:28, Shawn K. Quinn escreveu:
On Thu, Mar 27, 2014, at 09:14 AM, Jiri B wrote:
On Thu, Mar 27, 2014 at 08:10:05AM -0600, Theo de Raadt wrote:
TdR ... placing openssl there is not part of any solution that would work.
TdR What are other possible solutions?
Do you think sftp
Upgrading from March 25 snapshot to March 26 snapshot caused me to lose
status on the battery and A/C for my laptop. Dmesg's are below,
acpidump from both snapshots are attached. If there's any other needed
info please let me know and I'll get that when possible.
OpenBSD 5.5-current
Hi, I'm using 5.4 with XFCE and ZSH shell. When I'm on the XFCE terminal, and
type, for example cd and press tab key, I get cdcd.
It is repeating the first two or three characters.
Does anyone faced the same behavior.
Regards,
--
Leonardo M. Ramé
Medical IT - Griensu S.A.
Av. Colón 636 -
On 03/27/14 07:29, Stefan Wollny wrote:
Hi,
just noticed on cvs@ that Theo has activated pre-orders for 5.5.
I did so right away.
@Theo and the other devs: THANK YOU for your continued efforts to make
this fine OS even better!
Cheers,
STEFAN
http://shop.openbsdeurope.com/
is also taking
Hi,
I'm using spamd in greylisting mode to fight against spam. I saw in
my /var/log/daemon that it couldn't go through spamd and keep being
rejected (and then go through my MX2).
It's just to let you know in case you changed something on it recently
(sendmail - smtpd ?). I fixed the problem with
Hi,
Wong Peter wrote:
The Linksys wmp54g v4.1 is not support on Openbsd 4.1. Previously, it is
working but it is not working after few years.
4.1 ar eyou sure? And when did it use to work? Which older version? Try
with current OpenBSD 5.4
And report the dmesg.
Riccardo
Hello misc,
Thursday, March 27, 2014, 9:14:00 AM, Jiri wrote:
JB Could you please elaborate why not sftp for sets (and/or
JB for pkg_add)?
I'll rephrase: can someone besides Theo elaborate? It was an obvious
mistake to reply to his email (to be fair, I've addressed it to misc, not
to him).
On 27 March 2014 11:30, Boris Goldberg bo...@twopoint.com wrote:
Hello misc,
Thursday, March 27, 2014, 9:14:00 AM, Jiri wrote:
JB Could you please elaborate why not sftp for sets (and/or
JB for pkg_add)?
I'll rephrase: can someone besides Theo elaborate? It was an obvious
mistake to
JB Could you please elaborate why not sftp for sets (and/or
JB for pkg_add)?
I'll rephrase: can someone besides Theo elaborate? It was an obvious
mistake to reply to his email (to be fair, I've addressed it to misc, not
to him).
In his long email Theo was talking about openssl. It's my
On Thu, Mar 27, 2014 at 10:25:39AM -0300 or thereabouts, Leonardo M. Ramé wrote:
Hi, I'm using 5.4 with XFCE and ZSH shell. When I'm on the XFCE terminal, and
type, for example cd and press tab key, I get cdcd.
It is repeating the first two or three characters.
Does anyone faced the same
On Thu, Mar 27, 2014 at 02:44:34PM +0100, Gilles Chehade wrote:
I remotely run a script that will ssh, mount the encrypted volume and start
the services.
Which implies that the ssh user must be given sudo access without password?
The configuration and data bits are on the encrypted volume
Em 27-03-2014 12:43, Theo de Raadt escreveu:
JB Could you please elaborate why not sftp for sets (and/or
JB for pkg_add)?
I'll rephrase: can someone besides Theo elaborate? It was an obvious
mistake to reply to his email (to be fair, I've addressed it to misc, not
to him).
In his long
Geez, all you complainers and/or suggesters get over it.
The OpenBSD project makes decisions, sometimes you like
them, some times you don't. Get used to it.
If you feel that strongly about it quit using OpenBSD
or code something really good and efficient then present
it.
FWIW, Anyone who is
previously on this list Kenneth Westerback contributed:
1) It's not useful.
2) It's too complicated.
3) It's impossible to fit on the install media.
4) With the advent of signify and one of it's goals being efficiency it
would be a solution that needlessly wastes resources of many types.
While I received some replies off list about the continued
depreciation of APM (rightly so) and the ongoing development and
difficultly of doing ACPI work remotely, I figured I'd give this a
spin with past releases anyway, so:
ACPI hibernate doesn't work from 5.2 through -current, but APM
On 2014-03-27 15:41:16 +, Maurice McCarthy wrote:
On Thu, Mar 27, 2014 at 10:25:39AM -0300 or thereabouts, Leonardo M. Ramé
wrote:
Hi, I'm using 5.4 with XFCE and ZSH shell. When I'm on the XFCE terminal,
and type, for example cd and press tab key, I get cdcd.
It is repeating the
On Thu, Mar 27, 2014 at 1:37 PM, Diana Eichert deich...@wrench.com wrote:
FWIW, Anyone who is responsible for border firewalls deplores FTP protocol.
And its cousin, FTPS, which, although encrypted, has the same dual
port problem yet not curable via a proxy.
Chris
Hi,
im running
OpenBSD 5.5 (GENERIC.MP) #300: Wed Feb 26 16:28:46 MST 2014
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
Right now i'm trying some network fun.
I am using a thinkpad x201 where i combined iwn0 and em0 to a trunk
failover device. that works without
On Wed, Mar 26, 2014 at 06:25:16PM +0100, Dmitrij Czarkoff wrote:
Theo de Raadt wrote:
but given that 'unlink' is already used in some scripts
I would like to see some proof of that.
The use that triggered my original mail was in tests for devel/py-dulwich.
Oh, python code. not
On Wed, Mar 26, 2014 at 3:13 PM, Theo de Raadt dera...@cvs.openbsd.org wrote:
Using pkill(1) correctly should be more efficient than opening a
file, reading its contents, then passing those as an argument to
kill(1).
None of the mechanisms removes the race.
However, of all the mechanisms,
Since ffmpeg is linked against x264 you could just use it to read and
encode stuff to mp4. There is a guide[1] about how to do 2 pass, use
presets and the rest. You can also use -x264opts to pass options directly
to libx264 (but it doesn't support everything).
[1]
On Thu, Mar 27, 2014 at 2:28 PM, sven falempin sven.falem...@gmail.com wrote:
Sometimes i feel curse (or maybe just tired) :
main::(/bin/check_network.pl:164): my $src =
system('/usr/bin/pkill -HUP -f dhclient: trunk0');
DB2 n
main::(/bin/check_network.pl:165):if ($src) {
On Thu, Mar 27, 2014 at 3:00 PM, Philip Guenther guent...@gmail.com wrote:
On Thu, Mar 27, 2014 at 2:28 PM, sven falempin sven.falem...@gmail.com
wrote:
Sometimes i feel curse (or maybe just tired) :
main::(/bin/check_network.pl:164): my $src =
system('/usr/bin/pkill -HUP -f dhclient:
On 03/27/14 23:07, Philip Guenther wrote:
On Thu, Mar 27, 2014 at 3:00 PM, Philip Guenther guent...@gmail.com wrote:
On Thu, Mar 27, 2014 at 2:28 PM, sven falempin sven.falem...@gmail.com wrote:
Sometimes i feel curse (or maybe just tired) :
main::(/bin/check_network.pl:164): my $src =
On 03/27/14 23:26, Alexander Hall wrote:
On 03/27/14 23:07, Philip Guenther wrote:
On Thu, Mar 27, 2014 at 3:00 PM, Philip Guenther guent...@gmail.com
wrote:
On Thu, Mar 27, 2014 at 2:28 PM, sven falempin
sven.falem...@gmail.com wrote:
Sometimes i feel curse (or maybe just tired) :
On 2014-03-27 17:07, Philip Guenther wrote:
On Thu, Mar 27, 2014
at 3:00 PM, Philip Guenther guent...@gmail.com wrote:
On Thu,
Mar 27, 2014 at 2:28 PM, sven falempin sven.falem...@gmail.com [1]
wrote:
Sometimes i feel curse (or maybe just tired) :
main::(/bin/check_network.pl:164): my
On 03/27/14 23:36, Adam Thompson wrote:
my $src = system('/usr/bin/pkill -HUP -f ^dhclient: trunk0');
my $src = system('/usr/bin/pkill', '-HUP', '-f', '^dhclient: trunk0');
/Alexander
On Thu, Mar 27, 2014 at 6:42 PM, Alexander Hall alexan...@beard.se wrote:
On 03/27/14 23:36, Adam Thompson wrote:
my $src = system('/usr/bin/pkill -HUP -f ^dhclient: trunk0');
my $src = system('/usr/bin/pkill', '-HUP', '-f', '^dhclient: trunk0');
/Alexander
Thank you all, i'll put the
On 03/27/14 23:58, sven falempin wrote:
On Thu, Mar 27, 2014 at 6:42 PM, Alexander Hall alexan...@beard.se wrote:
On 03/27/14 23:36, Adam Thompson wrote:
my $src = system('/usr/bin/pkill -HUP -f ^dhclient: trunk0');
my $src = system('/usr/bin/pkill', '-HUP', '-f', '^dhclient: trunk0');
On Thu, Mar 27, 2014 at 6:58 PM, sven falempin sven.falem...@gmail.com wrote:
On Thu, Mar 27, 2014 at 6:42 PM, Alexander Hall alexan...@beard.se wrote:
On 03/27/14 23:36, Adam Thompson wrote:
my $src = system('/usr/bin/pkill -HUP -f ^dhclient: trunk0');
my $src = system('/usr/bin/pkill',
56 matches
Mail list logo