On Sun, Mar 05, 2023 at 11:26:04PM +0100, Pietro Leone Pola Falletti di
Villafalletto wrote:
> Hallo, I bought industrial fanless pc for using it as firewall with OpenBSD.
> I tried both 7.2 and 7.3-beta, I installed the stock operating system
> without any customization, the four nic and the
I also got other tips outside the email list, and this got me going
down a rabbit hole within the BIOS. After clearing nvram, and
resetting to defaults, somehow this got it to boot up just fine. I'm
part relieved that it works, and part concerned that I have no idea
why, so I've spent the
On Sun, Mar 5, 2023 at 6:36 PM Zack Newman wrote:
>
> > I am pretty sure it's a display/video driver issue and would like to
> > just disable anything I could to that effect since this will be a
> > headless system. Any suggestions on what I can do to troubleshoot
> > this further?
>
> Have you
I am pretty sure it's a display/video driver issue and would like to
just disable anything I could to that effect since this will be a
headless system. Any suggestions on what I can do to troubleshoot
this further?
Have you tried booting bsd in single-user mode? Have you tried booting a
Hi Mikhael,
Moving this on to Misc List as it is more approiaate for support type
requests,
It may not be OpenbSD, that is ignoring the fragments, depending on your
setup
an intermediate device ( NAT router etc) could be proccessing the IP
fragments incorrectly and or dropping them...
IP
Hallo, I bought industrial fanless pc for using it as firewall with
OpenBSD. I tried both 7.2 and 7.3-beta, I installed the stock operating
system without any customization, the four nic and the wifi did not work
out of the box. The differences is that during the installation the
wireless card
On 3/5/23 16:49, J Doe wrote:
> Hello,
>
> I was wondering if there is a limit to the number of characters that
> the username and/or password can be when using EAP MSCHAP-V2 in OpenIKED.
>
> In particular, I was wondering if either OpenIKED enforced a limit or
> whether MSCHAP-V2 has a limit
Hello,
I was wondering if there is a limit to the number of characters that the
username and/or password can be when using EAP MSCHAP-V2 in OpenIKED.
In particular, I was wondering if either OpenIKED enforced a limit or
whether MSCHAP-V2 has a limit based on the underlying authentication
Does OpenBSD 7.2 PF support *SIIT* (RFC 7915, also called stateless NAT64)?
No, PF's address translation is tied to firewall states.
Thank you very much for the information!
Gábor
On 2023-03-05, mabi wrote:
> Hello
>
> Is it possible to have OpenBSD 7.2 automatically reboot after a kernel panic
> happens?
>
> I tried setting:
>
> ddb.panic=0
>
> but it does not reboot automatically.
>
> As I am affected by the pfsync issue which leads to a kernel panic on OpenBSD
> 7.2
Hello
Is it possible to have OpenBSD 7.2 automatically reboot after a kernel panic
happens?
I tried setting:
ddb.panic=0
but it does not reboot automatically.
As I am affected by the pfsync issue which leads to a kernel panic on OpenBSD
7.2 so I would like the firewall to reboot as soon as
> unfortunately since a week I was wondering about something :
Despite the fact that a system thermal behavior is strongly dependent on acpi
and
the system hardware config - further then bios and external temperature - I
want to launch
a positive signal in favour of OpenBSD 7.2 and its recent
Dear community,
I have a problem with my openbsd nfsd server. My client (ubuntu) after a while,
sent a packet with flag F which to do not receive a correct response to close
the connection or something like that because it get stuck with FIN_WAIT_2
states. Here is the packet sent by client to
To get out from the dust produced I recommend you this one:
http://5md.at/l/77caf90
you can find it easely on Amazon too.
I dont know anything about APU2 but what a melancony thinking to
this usb to sata2 throughoutput!
My old minipcs come with a nice external sata socket enough for one disk..
I
On 2023-03-03, Gabor LENCSE wrote:
> Does OpenBSD 7.2 PF support *SIIT* (RFC 7915, also called stateless NAT64)?
No, PF's address translation is tied to firewall states.
Parts purchased online:
- SATA 7Pin Female to 7pin Male 90 Degree Angled Adapter
- 18in 1 Port SATA to eSATA Plate Adapter
I put electrical tape over the 90 degree adapter, to avoid contact with
the case.
Used the original plate as a template to mark holes in left side of the
case.
Drilled 4
16 matches
Mail list logo
