-
> *From:* owner-m...@openbsd.org on behalf of
> Samuel Jayden
> *Sent:* Tuesday, October 24, 2023 17:54
> *To:* Irreverent Monk
> *Cc:* misc@openbsd.org
> *Subject:* Re: Parallel PF
>
> I shared a naive user experience. I didn't mean to be rude. Anyway, thank
>
Hello dear OpenBSD team,
I'm sure that something like parallel IP forwarding and increasing the
number of softnet kernel tasks to 4 is definitely being considered on the
PF side too, but I would like to express my concern about timing. Do you
have any schedule for this?
I think one of the
l them that they must
> prioritize what they are doing for what you want...?
>
> On Tue, Oct 24, 2023 at 6:40 AM Samuel Jayden
> wrote:
>
>> Hello dear OpenBSD team,
>>
>> I'm sure that something like parallel IP forwarding and increasing the
>> number of
Hello misc@,
Is it possible to bind source address on wireguard as the source address of
the connection?
Thanks.
P.S. In fact this is a feature request. It's not too suitable for work
arounds.
Yeah, someone can say "use vrf", "use route command for the destination ip
address of the wireguard's
Hello Dear misc,
Model Full Name: Sierra Wireless, Incorporated Sierra Wireless EM7455
Qualcomm\M-. Snapdragon? X7 LTE-A
I have an OpenBSD system, and I want to use the Sierra Wireless modem as
the Umb interface. I changed the LTE mode to MBIM, but OpenBSD does not
recognize it as an Umb
r own kernel with the information
> provided.
>
> On April 19, 2023 2:12:00 AM MDT, Samuel Jayden <
> samueljaydan1...@gmail.com> wrote:
> >Sincerely thank you David for your answer,
> >I hope you may consider committing it to src and I kindly say that it
> would
> >be
Hello,
I have one veb interface in OpenBSD 7.2 and 5 ethernet ports are paired
with this veb. As I understand from the ifconfig output, 4096 mac address
cache values can be kept in this veb interface .
ifconfig veb10
veb10: flags=8843
index 12 llprio 3
groups: veb
em3
8PM +0000, Samuel Jayden wrote:
> > Hello,
> > I have one veb interface in OpenBSD 7.2 and 5 ethernet ports are paired
> > with this veb. As I understand from the ifconfig output, 4096 mac address
> > cache values can be kept in this veb interface .
> >
> &g
Hello misc,
My firewall just slowed down after upgrading from 7.2 to 7.3.
When I look at some values on the system I’ve realized there are high
interrupts on it.
Total Interrupts are over 40.000
em1 is over 4000
em2 is over 3000
Clock is nearly 2000
ipi over 30.000
But there are no
e these:
pmap_unwire: wiring for pmap 0xfd8e8c2f8bd8 va 0xc000a44000 didn't
change!
In Fact I live with pmap_unwire messages but that time those messages were
increased so much.
That's nearly all I have at the moment. Thanks.
On Thu, Jun 1, 2023 at 8:39 PM Boyd Stephens
wrote:
> On 5/2/
Hi again,
Just for the record:
I've downgraded to OpenBSD 7.2 (reinstalled) and everything is working like
a charm again.
I don't know what is wrong with 7.3 but ipi interrupt rate is too much and
somehow OpenBSD performance is too bad..
Thanks for reading.
On Tue, May 2, 2023 at 9:24 PM Samuel
contributed to this predicament.
Should there exist an equivalent to netgraph within OpenBSD, I am eager to
explore that avenue.
Thanks.
Sam
On Wed, Feb 14, 2024 at 2:06 PM Stuart Henderson
wrote:
> On 2024-02-13, Samuel Jayden wrote:
> > From the information provided in the link, i
.
This is why we love OpenBSD so much.
Kind regards
Sam
On Wed, Feb 14, 2024 at 7:26 PM Theo de Raadt wrote:
> Stuart Henderson wrote:
>
> > On 2024-02-13, Samuel Jayden wrote:
> > > From the information provided in the link, it appears that CARP and
> VRRP
> >
Hello again,
The patch you suggested definitely worked; OpenBSD no longer crashes. Thank
you very much.
On Wed, Jan 31, 2024 at 2:40 PM Samuel Jayden
wrote:
> Hello Valdrin,
>
> Thanks, I'll check it out and write here soon.
>
> On Wed, Jan 31, 2024 at 12:40 PM Valdri
Hello OpenBSD,
I am reaching out to seek guidance on creating redundancy between a Cisco
Router and OpenBSD. After conducting extensive research on the subject, I
find myself in need of clarification on a specific point.
My intention is to employ the use of the CARP protocol in OpenBSD and VRRP
24 at 8:26 PM Marcus MERIGHI wrote:
> Hello Samuel,
>
> samueljaydan1...@gmail.com (Samuel Jayden), 2024.02.13 (Tue) 17:35 (CET):
> > I am reaching out to seek guidance on creating redundancy between a Cisco
> > Router and OpenBSD. After conducting extensive research on the
Hello Misc,
My OpenBSD 7.4 crash with this error messages;
panic: kernel diagnostic assertion "ifp != NULL" failed: file
"/usr/src/sys/net/inet/if_ether.c", line 758
Stopped at db_enter+0x14: popq %rbp
TID PID UID PRFLAGS PFLAGS CPUCOMMAND
399412
}>
Is there a solution to this issue? What steps should I take?
Thanks.
On Sat, Jan 27, 2024 at 10:51 AM Samuel Jayden
wrote:
> Hello Misc,
>
> My OpenBSD 7.4 crash with this error messages;
>
> panic: kernel diagnostic assertion "ifp != NULL" failed: file
> &q
gt;
> I hope it works for you.
>
> --
> Valdrin
> --
> *From:* owner-m...@openbsd.org on behalf of
> Samuel Jayden
> *Sent:* Wednesday, January 31, 2024 10:29
> *To:* misc@openbsd.org
> *Subject:* Re: DDB Crash Report About if_ether.c and arpi
me message. I think it really
can not initialize the SIM.The question is why? How to troubleshoot?
On Mon, Nov 13, 2023 at 11:07 PM Stefan Sperling wrote:
> On Mon, Nov 13, 2023 at 10:03:01PM +0300, Samuel Jayden wrote:
> > Hello misc,
> >
> > After experiencing mbim attach (
ltroute
+ return
umb0: flags=8811 mtu 1500
index 7 priority 6 llprio 3
roaming disabled registration unknown
state down cell-class none
SIM not initialized PIN required
APN internet
status: down
Nothing changed. I've also rebooted...
On Mon, Nov 13, 2023 at 11:46 PM Samuel Jayden
wrote:
> H
:
> On Mon, Nov 13, 2023 at 11:46:14PM +0300, Samuel Jayden wrote:
> > Hello Stefan(s),
> >
> > Thanks for your replies.
> > In my setup PIN is disabled.Also I've just tried entering { ifconfig umb0
> > down;ifconfig umb0 apn internet;ifconfig umb0 pin "";if
:
> On Tue, Nov 14, 2023 at 10:10 AM Samuel Jayden
> wrote:
>
> > Nothing changed. I've also rebooted...
>
> Just to be sure... If you put this sim card into a mobile phone, is it
> asking for a PIN or not?
>
> Ciao,
> David
>
mbim-mode I was able to connect to it via cu -l /dev/cuaU2
Thanks.
On Tue, Nov 14, 2023 at 1:57 PM Stuart Henderson
wrote:
> On 2023-11-13, Samuel Jayden wrote:
> > # ifconfig umb0
> > umb0: flags=8815 mtu 1500
> > index 7 priority 6 llprio 3
> > roaming disabled reg
Hello misc,
After experiencing mbim attach (from umsm) issue[*] with EM7455, I
purchased another LTE module with a different (SIM8262E-M2) chipset. This
time switching to mbim mode was no problem.
However, this time it remains as "SIM not initialized". But when you
install Linux on the same
Dear Misc,
I have an OpenBSD device with two interfaces: vport10 with an IP address of
192.168.83.1/24 and vport20 with an IP address of 192.168.85.1/24. I have
configured IPSec to route all traffic from these two vport interfaces to
another point through an IPSec tunnel using the destination
26 matches
Mail list logo
