that, but i never seen a better FAQ than OpenBSD FAQ !
All
is well described ! Again, you just only have to read the FAQ !! And of
course have his head on his shoulders !!
And to finish, OpenBSD
Installation is very very easy !! What you said, this is the wrong time,
that's all ! ;-)
Wesley.
,
Wesley MOUEDINE ASSABY
Already done.
On 12.03.2012 11:24, Sebastian Benoit wrote:
Wesley(open...@e-solutions.re) on 2012.03.12 09:51:59 +0400:
Hi,
hw.sensors.cpu0.temp0=53.00 degC Here the dmesg running OpenBSD 5.0
RELEASE:
you should send this to dm...@openbsd.org, not misc ;-)
http://www.openbsd.org/faq
Hi
Yes i can test it. Keep you informed about it.
Cheers,
Wesley
MOUEDINE ASSABY
On 14.03.2012 05:18, Brad Smith wrote:
Hi Wesley,
Would you be able to build a kernel with the following diff
applied
and send me the dmesg from the new kernel?
Index:
sys/dev/pci/nviic.c
certificate in mmc
snap (Certificates/Authority)
Wesley.
Sorry for the message form.
Here is better :
http://pastebin.com/dxTrasGM
Thank you for your help.
Or :
*
I'm using an OpenBSD Gateway running :
*
OpenBSD vpn.area.lan 5.1
GENERIC.MP#214 i386
*
*
So what i'm trying to build:
*
:500 to RR.WW.RR.WW:52711, 325 bytes
Apr 3 14:32:57 vpn iked[15924]: ikev2_recv: IKE_AUTH from initiator
RR.WW.RR.WW:53054 to AA.BB.CC.DD:4500 policy 'win7', 1164 bytes
I can't connect on.
Thank you very much.
Wesley.
Le 2012-04-02 16:37, mxb a C)critB :
On 04/02/2012 10:17 AM, Wesley
BSDVM.COM is also great.
Cheers,
--
Wesley
Le 2012-04-25 16:01, C. Bensend a C)critB :
But there are several VPS companies around (arpnetworks.com is one)
that are OpenBSD friendly.
*If* I want to run a VPS, I rather give my money to a small compmay
that some behemoth.
+1.
ARP Networks
Hi,
Is it possible to tell ftpd to chroot in /var/www/htdocs/%u ? (doesn't
work)
I need ftp for multiple folders located in /var/www/htdocs/*
Thank you very much.
Wesley.
I tried this in /etc/login.conf
:ftp-dir=/var/www/htdocs/%u:\
:ftp-chroot=1:\
:tc=auth-ftp-defaults:
and cap_mkdb /etc/login.conf
Test it, the chroot is not possible, the %u is not accepted.
Any idea?
Le 2012-05-07 16:17, Wesley a C)critB :
Hi,
Is it possible to tell ftpd to chroot in /var
named : site1 can access (chroot)
only his folder /var/www/htdocs/site1
It is why i tried something like : ftp-dir=/var/www/htdocs/%u (but the
%u is misunderstood)
Any idea ? or a better way to achieve this ?
Thank you very much.
--
Wesley
The ftpd manpage says
ftp-chroot A boolean value
/website2
ForceCommand internal-sftp
PasswordAuthentication yes
--EOF
And in each chroot there's a folder 'site'.
Your method using ftpd is easiest to achieve the goal, i will probably
apply it later.
Cheers,
Wesley.
Le 2012-05-08 16:48, Stuart Henderson a C)critB :
On 2012-05-07, Wesley open
to have it works. ;-)
--
Wesley
Le 2012-05-11 20:39, Pavel Shvagirev a C)critB :
Hi everyone.
Trying to build ikev2 vpn between openbsd 5.1 and windows 7 via
certificates. Windows stops at #13843 error message - Invalid
payload
received. Iked -vd output has a 'sa_state: VALID - ESTABLISHED
personal.
The domain name and layout, i think it's good.
Only the content need to be updated.
--
wesley
in the Trusted Root Certification
Authorities store
And create a IKEV2 connection without EAP.
Thank you very much for your help.
Cheers,
Wesley M.A.
I already read your posts ;-) and also man pages (ikectl, iked.conf and
iked)
But now it is for a road warrior configuration.
I don't understand these parts :
Parts that i don't understand, if someone can help me on :
-For server, i need a certificate server for vpn.X.net ? or aa.bb.cc.dd
?
#(for server)
ikectl ca vpn certificate 192.168.0.51 install #(for server)
ikectl ca vpn certificate win7test create #(for win7)
ikectl ca vpn certificate win7test export #(for win7)
and /etc/iked.conf :
ikev2 esp \
from 192.168.0.0/24 to any peer any
--
Wesley
Le 2012-05-22 10:14, Wesley a C)critB
Hi,
I just done this tutorial, if it can help someone ;-)
http://www.mouedine.net
Advices are welcome.
Thank you very much.
Regards,
Wesley MOUEDINE ASSABY
wesley [at] mouedine[dot] net
Le 2012-06-02 20:37, jca+o...@wxcvbn.org a C)critB :
Wesley open...@e-solutions.re writes:
3. I wouldn't put that on the home page of a web server.
Thank you very much.
Thank you for sharing your experience.
It is a first draft, just to know if people are interested.
ASAP, i will put
even it might be uncommon
that
a CEO is tech-aware nowdays. :-)
Thank you very much. ;-)
--
Wesley MOUEDINE ASSABY
wesley[at] mouedine [dot] net
Right, not to put in production... Small oversight ;-)
Le 2012-06-02 23:02, Stuart Henderson a C)critB :
On 2012-06-02, Wesley open...@e-solutions.re wrote:
Hi,
I just done this tutorial, if it can help someone ;-)
http://www.mouedine.net
Advices are welcome.
Thank you very much.
Regards
Le 2012-06-04 1:38, Barry Grumbine a C)critB :
On Sat, Jun 2, 2012 at 7:37 AM, Wesley open...@e-solutions.re
wrote:
Hi,
I just done this tutorial, if it can help someone ;-)
http://www.mouedine.net
Advices are welcome.
Thank you very much.
Regards,
Wesley MOUEDINE ASSABY
wesley
stick and the copy
it to
your /etc
You can use 'ed'.
--
Wesley
on the disk, instead of booting from the CD.
Am I missing something obvious?
Jan
Put your cd. Reboot.
Hold ALT key at boot to have the choice between boot hard disk or
cdrom.
Hope it works for you.
Cheers,
Wesley MOUEDINE ASSABY
wesley[at]mouedine [dot]net
/config
Any idea ?
--
Wesley
reading config from /var/dovecot/config
Jul 27 19:04:58 current dovecot: anvil: Fatal: Error reading
configuration: Timeo
ut reading config from /var/dovecot/config
Any idea ?
--
Wesley
keyword in
/etc/login.conf...
So i increased 'default class' 512 to 2048, 'daemon class' 128 to 2048.
Seems to work ;-)
Any advices ?
Thank you very much for your help !
--
Wesley
www.mouedine.net
Le 2012-07-27 19:30, Mark Patruck a écrit :
Make sure you've increased limits (f.e. open file
As i said in the last reply, i modified Default and daemon class
openfiles-cur value to 2048.
I think it is better to follow your link, create a dovecot class and
add the value.
Thank you a lot. (Andre and Mark)
--
Wesley
Le 2012-07-27 21:36, Andre Keller a écrit :
Hi
Am 27.07.2012 19:18
done.
Regards,
Wesley
,
Wesley
day.
Regards,
Wesley.
Le 2012-08-28 15:04, Nick Holland a écrit :
On 08/28/12 06:34, Wesley wrote:
# echo 'httpd_flags=' /etc/rc.conf.local
and try again:
# /etc/rc.d/httpd start
httpd(ok)
#
ta-da!
Curiously, this exact example is in the FAQ:
http://www.openbsd.org/faq/faq10.html#rc
Nick.
/bin/htpasswd -c users wesley
Restart radicale : /etc/rc.d/radicale restart
try the cal server using ical (apple) : don't want my username/password
and the radicale log (/var/log/radicale) give me just :
INFO: Checking rights for calendar owned by nobody
2012-09-03 12:17:19,614 - INFO: wesley
By default, httpd is in chroot mode, so i just use add this to
/etc/rc.conf.local, and reboot the box :
httpd_flags=-u
I get the same errors :
INFO: Checking rights for calendar owned by nobody
2012-09-03 12:17:19,614 - INFO: wesley refused
Any idea ?
--
Wesley
Le 2012-09-03 12:34, Zé Loff
/radicale/config to :
...
type = htpasswd
...
/usr/bin/htpasswd -s -c /etc/radicale/users wesley
/usr/bin/htpasswd -s /etc/radicale/users bruno
I start radicale server : /etc/rc.d/radicale start
Now, i use my imac, and try to connect to caldav : ip_address:5232 ;
username wesley
I can't access.
tail
), using ical (from iMac), it
works great AND without httpd.
I just added htpasswd, and users file. Run again : /etc/rc.d/radicale
restart
Try it a second time with ical : user refused in /var/log/radicale
Any idea ?
--
Wesley
Le 2012-09-05 17:51, Chris Cappuccio a écrit :
My African bank
Le 2012-09-05 20:38, Chris Cappuccio a écrit :
Wesley [open...@e-solutions.re] wrote:
Euh... httpd is not used here.
Oh, well see, then you're asking the wrong person. I don't even know
what radicale is.
Radicale is a calDav/CardDav Server.
What i want : build it with authentication
)
Sendmail 8.14.5, with libmilter
Bind 9.4.2-P2 (+ patches)
NSD 3.2.11
Lynx 2.8.7rel.2 with HTTPS and IPv6 support (+ patches)
Sudo 1.7.2p8
Ncurses 5.7
Heimdal 0.7.2 (+ patches)
Arla 0.35.7
Binutils 2.15 (+ patches)
Gdb 6.3 (+ patches)
Less 444 (+ patches)
Awk Aug 10, 2011 version
Regards,
--
Wesley
a different
algorithm
(crypt or plain) on the radicale config.
It is what i have done :
read this :
more /usr/local/share/doc/pkg-readmes/radicale-0.7
/usr/bin/htpasswd -s -c /etc/radicale/users wesley
/usr/bin/htpasswd -s /etc/radicale/users bruno
tail /var/log/radicale give me :
2012-09-05 15
Le 2012-09-05 23:26, Chris Cappuccio a écrit :
Z?? Loff [zel...@zeloff.org] wrote:
What about htdigest ? Maybe that's what it's looking for.
If we read this : more /usr/local/share/doc/pkg-readmes/radicale-0.7
htpasswd utility is used, not others.
--
Wesley
Le 2012-09-06 0:47, Stuart Henderson a écrit :
Moved to ports@ where it should be.
Thank's!
I suspect your calendar path is incorrect, typically it would be
something like https://localhost:5232/username/calendar
Using ical (from imac), i follow this :
works without authentication)
Thank you very much for all.
--
Wesley
Le 2012-09-06 0:47, Stuart Henderson a écrit :
I suspect your calendar path is incorrect, typically it would be
something like https://localhost:5232/username/calendar
Now, i use my imac, and try to connect to caldav
Sep 10 16:43:55 2012] [error] PHP Fatal error: Call to a member
function PreconditionFailed() on a non-object in
/var/www/davical/inc/caldav-ACL.php on line 148
Any idea ?
Thank you very much.
Regards,
Wesley MOUEDINE ASSABY
,
Wesley M.
??
The install52.iso file compared to SHA256 file (from
ftp.openbsd.org/...) : OK
I'm going to try it with a VM.
Thank you for your reply.
Cheers,
--
Wesley
Le 2012-10-11 10:25, bert a écrit :
Dmesg from a working system, or nobody is going to be able to
help you. Christ, man, you've been
Tried with Vmware, reboot just after this
CDROM: 9F
Loading /5.2/I386/CDBOOT
I suspect this iso doesn't work...
If someone can test it.
--
Wesley
Le 2012-10-11 10:33, Wesley a écrit :
The hardware is supported from the last release OpenBSD 5.1...
Also i already tried a snapshot i386
reply.
--
Wesley
Tested with a new mirror: same problem, reboot just after
CDROM: 9F
Loading /5.2/I386/CDBOOT
--
Wesley
Le 2012-10-11 11:00, Wesley a écrit :
Le 2012-10-11 10:50, Peter N. M. Hansteen a écrit :
there are some fairly straightforward ways to check whether it's the
iso file that's at fault.
try
I com back, so i tested iso files : install52.iso, cd52.iso (from i386
snapshots)
Same problem, reboot just after :
CDROM: 9F
Loading /5.2/I386/CDBOOT
If someone can rebuild the snapshots...
Cheers,
--
Wesley
Le 2012-10-11 11:15, Wesley a écrit :
Tested with a new mirror: same problem
Satisfied to see that i'm not the only one. ;-)
Le 2012-10-11 15:39, Udo Siewert a écrit :
On 10/11/12 12:51, Wesley wrote:
I com back, so i tested iso files : install52.iso, cd52.iso (from
i386
snapshots)
Same problem, reboot just after :
CDROM: 9F
Loading /5.2/I386/CDBOOT
I can confirm
http://comments.gmane.org/gmane.os.openbsd.misc/191903)
Thank you very much.
--
Wesley
The notebook : Durabook S13Y
Here's a full dmesg (dmesg ; sysctl hw.sensors):
OpenBSD 5.1 (GENERIC.MP) #188: Sun Feb 12 09:55:11 MST 2012
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
Hi,
I just tested install52.iso, the last snapshot built on 15 Oct 12.
It works.
--
Wesley
Le 2012-10-12 5:06, Stuart Henderson a écrit :
On 2012-10-11, Yusof Khalid - FreeBSD / OpenBSD frysha...@gmail.com
wrote:
Hi,
Confirm the iso is somehow got problem. I've tried with my
virtualbox
hw.sensors.lm1.volt7=3.20 VDC (3.3VSB)
hw.sensors.lm1.volt8=0.78 VDC (VBAT)
hw.sensors.lm1.volt9=1.58 VDC
Thank you very much for your help.
--
Wesley
:
media none
Thank you very much for your replies.
Cheers,
--
Wesley M.A
PS : I already test it on mac os, sure the device works.
attach, your device perhaps needs some different
gpio magic to the one I have. I you can donate one I'll take a look.
Hi,
I only have one device.
If you want, i can give you a full access using ssh.
Cheers,
--
Wesley
or
/mnt/5.2/i386)
Cheers,
Wesley
Le 2012-10-29 11:12, bofh a écrit :
Hi,
Can someone help me understand how sysmerge works? I made all the
config changes and then followed the instructions at
http://openbsd.org/faq/upgrade52.html and did this:
# sysmerge -s $RELEASEPATH/etc52.tgz -x $RELEASEPATH
xterm on secure
# reboot the box, thinclient start, but the keyboard doesn't work.
Any idea ?
Thank you very much for your precious help.
Cheers,
Wesley
- thin -c /usr/X11R6/bin/xinit xterm on secure
Any idea ?
Thank you very much.
Cheers,
--
Wesley
unavailable) on X server
:0
after 7 requests (7 known processed) with 0 events remaining
When start fwvm, it is possible to disable xterm at startup ?
Again, thank you very much for your precious help!
Cheers,
Wesley
with fvwm! It is pretty cool ! ;-)
Cheers,
Wesley
Le 2012-10-31 13:22, MERIGHI Marcus a écrit :
Hello Wesley,
note: ``autologin'' is a regular user in my case. I never saw the
X.org errors you mention.
Le 2012-10-31 17:30, MERIGHI Marcus a écrit :
I would try in .Xdefaults
XTerm*loginShell:false
OR
you could do the following in .profile:
pgrep -f -x /usr/X11R6/bin/X .* || /usr/X11R6/bin/xinit
Hi,
I tried both solutions.
No error messages, but keyboard doesn't work.
Cheers,
Wesley
I just put this in my .profile :
echo running X ... /bin/sleep 5 /usr/X11R6/bin/startx
--
Wesley
Le 2012-11-02 9:25, Wesley a écrit :
Le 2012-10-31 17:30, MERIGHI Marcus a écrit :
I would try in .Xdefaults
XTerm*loginShell:false
OR
you could do the following in .profile:
pgrep -f -x
flags S/SA \
keep state queue (q_def, q_pri)
from this : http://www.benzedrine.cx/ackpri.html
Thank you very much for your replies.
Cheers,
Wesley.
icmp all icmp-type echoreq
pass in on egress inet proto tcp from any to any port 3389 \
rdr-to $rdphost tag rdp set prio (1,7)
pass out on $lan tagged rdp
*
Cheers,
Wesley
Hi,
you can try this :
/usr/sbin/sysctl hw.disknames
Cheers,
Wesley
Le 2012-12-21 7:17, Indunil Jayasooriya a écrit :
HI,
I would like to know How to list available all hard disks in OpenBSD
?
If I run below 2 commands, it will give an output.
dmesg |grep wd0
fdisk wd0
If I install
Le 2012-12-26 19:46, Live user a écrit :
Where can I find all the software that comes
in install52.iso?
Please, read the famous OpenBSD FAQ :
1.8 - What is included with OpenBSD?
Here it is : http://www.openbsd.org/faq/faq1.html#Included
Cheers,
Wesley MOUEDINE ASSABY
]
At this prompt, hit Ctrl+C or ! and
Why don't you mount a second disk and backup /home to
this one? just before fdisk part.
Cheers,
Wesley
, it will backup only if :
ROOTBACKUP Variable is enable (=1)
or altroot partition in /etc/fstab
Actually none of these 2 statements are present. Any idea ?
Thank you very much.
Regards,
Wesley
On 10.04.2014 13:41, Stuart Henderson wrote:
Try ASR_DEBUG=1 ping somehost and post the result..
Very useful, where can we find informations about these kind of
variables like LD_DEBUG, ASR_DEBUG or other ??
Thank you very much
Ibsen S Ripsbusker wrote:
Are there services that sell managed OpenBSD shell accounts?
I mean a service similar to sdf.org.
Try google with keywords "online unix terminal for shell scripting", you
will find a lot results.
regards.
Hi Philip,
Thank you very much for your answer.
I tried to disable all options (+devices) possible. Same issue.
And what's about disable acpi in the kernel using the bsd.re-config?
Do you think If I replace the wireless card by somthing else, It could resolve
this issue?
/Wesley
> If there isn't a newer BIOS that resolves this, I would tend to return the
> box as not suitable.
This is the case, there’s no BIOS update.
Thank you very much, anyway.
Cheers,
/Wesley
De : Philip Guenther
Envoyé : lundi 23 octobre 2023 00:39
À : wes...@technicien.io
howdy, ive had a look around and asked on whirlpool forums to get in
kernel pppoe working
modem is setup as a bridge, has sync and works fine in the userland ppp
im using the faq example for pppoe0
/etc/hostname.pppoe0
inet 0.0.0.0 255.255.255.255 0.0.0.1 pppoedev fxp1 \
typo, my bad
it is supposed to be
/etc/hostname.fxp1
up
thanks
On 5/10/07, Wesley Connor [EMAIL PROTECTED] wrote:
/etc/hostname.pppoe0
inet 0.0.0.0 255.255.255.255 0.0.0.1 pppoedev fxp1 \
authproto chap authname [EMAIL PROTECTED] authkey bahbahbah up
, you use something else ... what ? ;-) snort ?
Thank you
very much !
All the best,
Wesley.
to view alerts provided by
scanlogd. Any idea ?
cheers,
Wesley.
On Wed, 19 Oct 2011 09:31:35 +0400, Wesley M. open...@e-solutions.re
wrote:
Hi,
I use OpenBSD 4.9, i'm looking for a good nids.
I found
scanlogd in ports, works very well.
But is there a way to work this
last one with pf
firewall, we can play with QoS/IP,Ports filter/NAT/ Src NAT/
Statefull/Load Balancing/scrub
But it is not a NIDS. ;-)
All the best,
Wesley M.
On Wed, 19 Oct 2011 10:05:33 +0300, Gregory Edigarov
g...@bestnet.kharkov.ua wrote:
I think it is bad practice to use something that's not even
of my pf.conf:
...
anchor ftp-proxy/*
pass in on $lan inet proto tcp from $limithost \
to port 21 divert-to 127.0.0.1 port 8021 queue ilimit
...
Is there a way to solve this problem?
I want also that the others can download on ftp at full speed*
Thank you very much.
Cheers,
Wesley.
Restart the box.
Now, when this limited user download files using ftp, it downloads at
20Ko/s.
But the others download also at 20Ko/s ; How can i fix the others to
download files at 128 Ko/s ?
How can i have 2 ftp stream like one 20Ko/s and 128 Ko/s ?
Thank you very much for your help.
Wesley
in on $_int inet proto tcp from $int_net to any port \
{ www, https, ssh, pop3, imap, imaps, pop3s, submission, smtps }
pass out on $_ext inet proto tcp all
pass out on $_ext inet proto udp all
All the best,
Wesley MOUEDINE ASSABY.
_int = re0
_ext = fxp1
int_net = 192.168.200.0/24
pass
instead of 20Ko/s.
I think, it is not the right way to do it.
Is there someone who have a sample ? using -T option for ftp-proxy ?
Thank you very much.
Wesley.
On Thu, 03 Nov 2011 09:02:32 +0100, Camiel Dobbelaar c...@sentia.nl
wrote:
Run two ftp-proxies: one with the -q ilimit and one with the -q
Hi,
See here :
http://mouedine.net/ruleset49.aspx
(with divert/tag
use)
All the best,
Wesley MOUEDINE ASSABY
Hi,
What's about the post-Altq ?
See here :
http://bsdly.blogspot.com/2011/07/anticipating-post-altq-world.html
Does
someone have any news about that?
Cheers,
Wesley.
Hi,
See here :
http://mouedine.net/ruleset5.aspx
(with divert/tag use)
All the best,
Wesley MOUEDINE ASSABY
Je prends note ;-)
Merci.
On Fri, 4 Nov 2011 19:37:46 +0100, hvom .org hvom@gmail.com wrote:
Le 4 novembre 2011 19:14, Wesley M. open...@e-solutions.re a C)crit :
Hi,
See here :
http://mouedine.net/ruleset5.aspx
(with divert/tag use)
All the best,
Wesley MOUEDINE ASSABY
Faire
)
...
OR
pass out on egress inet proto tcp prio (1,7)
What is better, or perhaps, it works on the same way...
If someone can help on ...
Thank you very much.
Wesley
Hi,
I seen http://www.opensmtpd.org
Does exist a stable version ?
can we put it on production ?
And what's about your handbook :
https://www.poolp.org/OpenSMTPD/
Possible to have this hanbook in french
?
Thank you very much for replies.
All the best,
Wesley M.
Hi,
Please read again : http://www.openbsd.org/faq/pf/example1.html
Or you can take a look here : http://mouedine.net/ruleset5.aspx
Cheers,
Wesley
On Mon, 21 Nov 2011 19:15:06 +1100, John Tate j...@johntate.org wrote:
I am having troubles with this pf configuration, it seems when loaded
to do that... Wrong ?
Thank you very much for your help.
Cheers,
Wesley
Thank you very much for your help !
Now all works fine.
I just configured the smart host my mc file.
On Thu, 24 Nov 2011 10:12:17 +0100, Antoine Jacoutot
ajacou...@bsdfrog.org wrote:
On Thu, Nov 24, 2011 at 09:54:17AM +0100, Paul de Weerd wrote:
Looking more closely at how I set this up,
postfix) ; restart
the box
and try manually : sendmail -bd -q30m, things works well, therefore, just
after that,
postfix start automatically.
So ?
Thank you very much for your help.
Wesley.
=${pkg_scripts} postfix
I'm agree, but how to start sendmail with pkg_scripts using flags : -bd
-q30m ??
Thank you for your reply.
Wesley.
pop3/pop3s does this working with
roundcubemail-0.5.3p1 ?
Thank you very much for your help.
Cheers,
Wesley.
Thank you very much. It works.
Except i can't connect to my imap server. :-(
I use dovecot. Ports are opened.
??
On Mon, 05 Dec 2011 21:15:08 +1300, Richard Toohey
richardtoo...@paradise.net.nz wrote:
On 5/12/2011, at 9:03 PM, Wesley M. wrote:
Hi,
I have the following error :
Check
:
On Mon, 05 Dec 2011 12:38:46 +0400
Wesley M. open...@e-solutions.re wrote:
Thank you very much. It works.
Except i can't connect to my imap server. :-(
I use dovecot. Ports are opened.
??
again,search your roundcube config file for 'localhost'
pattern, and replace it with 127.0.0.1
,smtps}
So my configuration : OpenBSD 5.0
dovecot-2.0.13p5
roundcubemail-0.5.3p1
sendmail
mysql-server
php
On Mon, 5 Dec 2011 13:18:02 +0200, Gregory Edigarov
g...@bestnet.kharkov.ua wrote:
On Mon, 05 Dec 2011 14:56:20 +0400
Wesley M. open...@e-solutions.re wrote:
Hi,
Thank you
in my /etc/dovecot/dovecot.conf
i added this line :
mail_location = mbox:/var/mail/%u
when i atempt to connect using webmail (roundcube) and do a tail -f
/var/log/maillog, i have :
Dec 5 15:45:19 mailserver dovecot: imap-login: Login: user=wesley,
method=PLAIN, rip=127.0.0.1, lip=127.0.0.1
I modified mail_location in dovecot.conf :
mail_location = mbox:~/mail:INBOX=/var/mail/%u
but still not working :-(
Have this in maillog :
Dec 5 16:22:53 mailserver dovecot: imap-login: Login: user=wesley,
method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=14593, secured
Dec 5 16:22:53
script
doesn't work well, precompiled package like php5-core,dovecot--mysql, the
name has changed.
There's a lot of bugs to correct...
Perhaps, someone can correct them here ;-)
That said, it is a very good product, and i use already the 4.7.6 mail
server.
Cheers,
Wesley.
On Mon, 05 Dec 2011
answers.
Wesley.
/%u (maildir).
And then use roundcubemail package.
Thank you
very much for your help.
Wesley.
1 - 100 of 229 matches
Mail list logo
