Dear all,
I tried to run OpenBSD 6.2 on Debian GNU/Linux 9.2 and qemu-kvm 2.8 no
issue so far too.
Proxmox is using Debian GNU/Linux as the core OS.
Next step will be to use the same version of qemu-kvm that Proxmox 5.0
ship by default.
Regards,
On 12/10/2017 13:38, Scott Reese wrote:
On
I didn't think it was isakmpd related back then.
Maybe a configuration issue on my end or the partner's.
But sure we need to post traces.
Nonetheless OpenBSD is an amazing piece of software, so thank you !
Regards,
Alexis.
On 29/05/2017 11:14, Theo de Raadt wrote:
Great thing is you all have
Hi Michał,
I'm having same issue without 100 ipsec tunnels and dedicated hardware.
Unfortunately it's a production environment so I can't really
troubleshooting this issue to track down the culprit.
Anyway maybe it's not related to your issue.
Regards,
Alexis.
On 28/05/2017 14:31, Michał Koc
Hi Gregor,
I use the same revision than yours :
- "Intel 82583V" rev 0x00: msi
Regards,
Alexis VACHETTE.*
*
On 16/11/2015 10:12, Alexis VACHETTE wrote:
> Hi Gregor,
>
> Thank you for your feedback.
>
> Did you have some timeout on 5.6 ?
>
> On amd64 version, I ex
Hi Gregor,
Thank you for your feedback.
Did you have some timeout on 5.6 ?
On amd64 version, I experienced some on heavy network load. Is it related ?
Regards,
Alexis VACHETTE.
On 11/11/2015 21:19, Gregor Best wrote:
Hi Alexis,
On Wed, Nov 11, 2015 at 08:11:15PM +, Alexis VACHETTE wrote
Hi Gregor,
Even with heavy network load ?
Regards,
Alexis.
De : owner-t...@openbsd.org de la part de Gregor Best
Envoyé : mercredi 11 novembre 2015 15:20
À : Mark Kettenis
Cc : t...@openbsd.org; misc@openbsd.org
Objet : Re: em(4) watchdog timeouts
I've
Thank you for the tips Brett.
I ordered my two boards from gooze.eu's website.
The two APU have an old bios.
One of them is up-to-date since my debugging session last evening.
I will update the last one today ;)
Best regards,
Alexis VACHETTE.
_
From: Brett Mahar [mail
Glad to see it's working for you too ;)
Thanks to Stuart for the debugging session and Theo !
Best regards,
Alexis VACHETTE.
_
From: Zé Loff [mailto:zel...@zeloff.org]
To: misc@openbsd.org
Sent: Sun, 06 Apr 2014 00:31:53 +0100
Subject: Re: APU firmware
On Sat, Apr 05, 2014 at 08:14
27;t map
interrupt
The system hang after.
Best regards,
Alexis VACHETTE.
_
From: Stuart Henderson [mailto:s...@spacehopper.org]
To: misc@openbsd.org
Sent: Sat, 05 Apr 2014 10:14:22 +0100
Subject: Re: APU firmware
On 2014-04-04, Zé Loff wrote:
> On Thu, Apr 03, 2014 at 07:22:52A
Good evening,
The board boot successfully with OpenBSD 5.5.
I'm unable to get the login prompt with serial port.
I enabled the serial port with /etc/ttys file :
- tty00 "/usr/libexec/getty std.9600" vt220 on secure
I am missing something here ?
Best regards,
Alexis VACHETTE
After booting a recent snapshot of OpenBSD 5.5, it's working without big
issues.
I don't have any mSSD card right know (firmware issues), I will only test
network card (wired and wireless) ;)
Best regards,
Alexis VACHETTE.
_
From: Stuart Henderson [mailto:s...@spacehopper.org]
Thank you for the tips Stuart.
It's mandatory to use the same speed ?
Best regards,
Alexis VACHETTE.
_
From: Stuart Henderson [mailto:s...@spacehopper.org]
To: Alexis Vachette [mailto:avache...@sisteer.com]
Cc: misc@openbsd.org
Sent: Sat, 05 Apr 2014 21:43:15 +0100
Subject: Re
Hum, maybe too quick.
I can't type anything in the shell, it's always blank ;(
Best regards,
Alexis VACHETTE.
_
From: Stuart Henderson [mailto:s...@spacehopper.org]
To: Alexis Vachette [mailto:avache...@sisteer.com]
Cc: misc@openbsd.org
Sent: Sat, 05 Apr 2014 22:12:46 +0100
S
I don't know what to say.
It's working now, thank you very much Stuart ;)
Best regards,
Alexis VACHETTE.
_
From: Stuart Henderson [mailto:s...@spacehopper.org]
To: Alexis Vachette [mailto:avache...@sisteer.com]
Cc: misc@openbsd.org
Sent: Sat, 05 Apr 2014 22:12:46 +0100
Subjec
Thanks Theo, I will test that ASAP ;)
When my two boards will be at home !
Regards,
*Alexis VACHETTE | Network and System Engineer
* Sisteer France: 43 rue Pierre Valette, 92240 Malakoff -- France
Direct line: +33 1 70 95 51 19 | Fax: +33 1 70 95 50 90
www.sisteer.com <http://www.sisteer.com&
Hi Peter,
What you mean by the local one, it's the one with which I have trouble ?
*Alexis VACHETTE | Network and System Engineer
* Sisteer France: 43 rue Pierre Valette, 92240 Malakoff -- France
Direct line: +33 1 70 95 51 19 | Fax: +33 1 70 95 50 90
www.sisteer.com <http://www.sisteer
Hi Giancarlo,
This can be an option but we have one more router which export is
netflow data.
We need to have a single point of data collection.
*Alexis VACHETTE | Network and System Engineer
* Sisteer France: 43 rue Pierre Valette, 92240 Malakoff -- France
Direct line: +33 1 70 95 51 19 | Fax
Hi Patrick,
Yes you're are right.
*Alexis VACHETTE | Network and System Engineer
* Sisteer France: 43 rue Pierre Valette, 92240 Malakoff -- France
Direct line: +33 1 70 95 51 19 | Fax: +33 1 70 95 50 90
www.sisteer.com <http://www.sisteer.com>
Le 04/12/2013 14:10, Patrick Lamaizi
We use carp(4), but right know the configuration is broken.
I don't see any traffic passing through the carp2 interface.
*Alexis VACHETTE | Network and System Engineer
* Sisteer France: 43 rue Pierre Valette, 92240 Malakoff -- France
Direct line: +33 1 70 95 51 19 | Fax: +33 1 70 95 50 90
www.
ll, comme indiqué dans mon message suivant.
*Alexis VACHETTE | Network and System Engineer
* Sisteer France: 43 rue Pierre Valette, 92240 Malakoff â France
Direct line: +33 1 70 95 51 19 | Fax: +33 1 70 95 50 90
www.sisteer.com <http://www.sisteer.com>
Le 03/12/2013 18:28, sven falempin
quot; command always give me a correct answer :
# nc -zvu 192.168.1.19 9995
Connection to 192.168.1.19 9995 port [udp/*] succeeded!
If you need anything else don't hesitate.
Right now, I'm stuck because I don't see anything wrong.
*Alexis VACHETTE | Network and System Engineer
* Si
7;t see anything going out of the em2 interface.
On a lab environment with GNS3, I clearly see the UDP packets going out
of the sender interface.
Is there a best way to troubleshoot this issue ?
I don't know how to fix this behaviour, I tried to destroy and recreate
the pflow0 interface
22 matches
Mail list logo
