crontab mail
If I specify MAILTO=email@my.domain in roots crontab. I'll recieve mail when cron runs what I've asked it to. With MAILTO=root Mails are delivered to the local mailbox on the system In /etc/postfix/aliases I have root: email@my.domain I've executed newaliases at the command prompt. Has anyone got an idea on why I can't get the mails to root to my external mail address? Thanks /Leslie
Re: NO-IP not updating!
On 2011-01-27 16:39, Orestes Leal R. wrote: On Wed, Jan 26, 2011 at 10:56:02AM +0100, Leslie Jensen wrote: Upon installation of noip I ran the command noip2 -C to configure it. I want noip to run a script every 30 minutes that sends a mail to me at the end of the updating of the address. So I choose the settings accordingly when configuring noip. I've put the following in my /etc/rc.local -- # Add your local startup actions here. /usr/local/sbin/noip2 echo '.' -- When the machine is booted I get the mail, but I do not get the updates every 30 minutes as I should. I don't think the mail gets to you, if you run noip2 without the '' I think it will work, you put the process in background and that why the mail can't get delivered for some reason. this happens to me in other situations. Top shows the process 6013 _noip 2 0 428K 916K idle select 0:00 0.00% noip2 Everything looks fine, but note that you didn't get noip from ports (so it may be incompatible with OpenBSD). Try posting your configuration, running noip in debug mode (if it has one), or switching to net/ddclient. Joachim I tried you suggestion with removing the '' but it had no effect what so ever. I'll try out the suggestion with debug mode. /Leslie
Re: NO-IP not updating!
On 2011-01-26 19:05, Jeff Ross wrote: On 01/26/11 10:44, Leslie Jensen wrote: Abel Abraham Camarillo Ojeda skrev 2011-01-26 16:39: On Wed, Jan 26, 2011 at 3:56 AM, Leslie Jensenles...@eskk.nu wrote: Hello list. I'm quite new to Openbsd, have used Freebsd for a while. I have a newly installed Openbsd system. OpenBSD machine01.no-ip.org 4.8 GENERIC.MP#335 amd64 Upon installation of noip I ran the command noip2 -C to configure it. I want noip to run a script every 30 minutes that sends a mail to me at the end of the updating of the address. So I choose the settings accordingly when configuring noip. I've put the following in my /etc/rc.local -- # Add your local startup actions here. /usr/local/sbin/noip2 echo '.' -- When the machine is booted I get the mail, but I do not get the updates every 30 minutes as I should. I cannot see if the the daemon starts because the line at the startup screen shows only starting local daemons:, The command: # ps -aux | grep noip Gives _noip B B 6013 B 0.0 B 0.2 B 428 B 916 ?? B Is B B 10:04AM B B 0:00.01 /usr/local/sb Top shows the process 6013 _noip B B B 2 B B 0 B 428K B 916K idle B B B select B B 0:00 B 0.00% noip2 If I kill that process and start noip2 from the command line it also sends the mail at start up but not after the following 30 minutes. I'm not sure whether noip is running every 30 minutes I've been tailing /var/log/messages and I cannot see anything related to noip there. Can anyone on this list point me in the right direction? Thanks /Leslie cron(8), maybe? It is supposed to work as a daemon with no need for cron! /L !DSPAM:4d405e91283431811913398! ktrace the process. man ktrace and pay attention to how to stop the ktrace process and man kdump to see how to read the output. Hope that helps! Jeff I tried ktrace and I could see that things happened with the update interval on noip2 set to 2 minutes. Unfortunately I'm no master at interpreting the output ;-) Here's an output from ktrace: -- # kdump 11273 noip2EMUL native 11273 noip2RET select 0 11273 noip2CALL gettimeofday(0x7f7c1960,0) 11273 noip2RET gettimeofday 0 11273 noip2CALL gettimeofday(0x7f7c1960,0) 11273 noip2RET gettimeofday 0 11273 noip2CALL stat(0x20fbe0076,0x7f7c1a00) 11273 noip2NAMI /etc/resolv.conf 11273 noip2RET stat 0 11273 noip2CALL gettimeofday(0x7f7c1910,0) 11273 noip2RET gettimeofday 0 11273 noip2CALL open(0x20fbdd713,0,0x1b6) 11273 noip2NAMI /etc/hosts 11273 noip2RET open 1 11273 noip2CALL fstat(0x1,0x7f7c1d50) 11273 noip2RET fstat 0 11273 noip2CALL mprotect(0x205729000,0x1000,0x3) 11273 noip2RET mprotect 0 11273 noip2CALL mprotect(0x205729000,0x1000,0x1) 11273 noip2RET mprotect 0 11273 noip2CALL read(0x1,0x208422000,0x4000) 11273 noip2GIO fd 1 read 310 bytes # $OpenBSD: hosts,v 1.12 2009/03/10 00:42:13 deraadt Exp $ # # Host Database # # RFC 1918 specifies that these networks are internal. # 10.0.0.0 10.255.255.255 # 172.16.0.0172.31.255.255 # 192.168.0.0 192.168.255.255 # 127.0.0.1 localhost ::1 localhost 172.18.0.1 machine01.no-ip.org machine01 11273 noip2RET read 310/0x136 11273 noip2CALL read(0x1,0x208422000,0x4000) 11273 noip2RET read 0 11273 noip2CALL close(0x1) 11273 noip2RET close 0 11273 noip2CALL gettimeofday(0x7f7c18c0,0) 11273 noip2RET gettimeofday 0 11273 noip2CALL gettimeofday(0x7f7c1050,0) 11273 noip2RET gettimeofday 0 11273 noip2CALL gettimeofday(0x7f7c0bd0,0) 11273 noip2RET gettimeofday 0 11273 noip2CALL gettimeofday(0x7f7c0ac0,0) 11273 noip2RET gettimeofday 0 11273 noip2CALL gettimeofday(0x7f7c1090,0) 11273 noip2RET gettimeofday 0 11273 noip2CALL getpid() 11273 noip2RET getpid 11273/0x2c09 11273 noip2CALL getpid() 11273 noip2RET getpid 11273/0x2c09 11273 noip2CALL getpid() 11273 noip2RET getpid 11273/0x2c09 11273 noip2CALL getpid() 11273 noip2RET getpid 11273/0x2c09 11273 noip2CALL getpid() 11273 noip2RET getpid 11273/0x2c09 11273 noip2CALL gettimeofday(0x7f7c1080,0) 11273 noip2RET gettimeofday 0 11273 noip2CALL gettimeofday(0x7f7c08b0,0) 11273 noip2RET gettimeofday 0 11273 noip2CALL socket(0x2,0x2,0) 11273 noip2RET socket 1 11273 noip2CALL connect(0x1,0x20ff1c918,0x10) 11273 noip2RET connect 0 11273 noip2CALL sendto(0x1,0x7f7c11f0,0x25,0,0,0) 11273 noip2GIO fd 1 wrote 37 bytes \M^N\M^B\^A\0\0\^A\0\0\0\0\0\0 dynupdate\^Eno-ip\^Ccom\0\0\^A\0
Re: NO-IP not updating!
On 2011-01-27 14:41, Joachim Schipper wrote: On Wed, Jan 26, 2011 at 10:56:02AM +0100, Leslie Jensen wrote: Upon installation of noip I ran the command noip2 -C to configure it. I want noip to run a script every 30 minutes that sends a mail to me at the end of the updating of the address. So I choose the settings accordingly when configuring noip. I've put the following in my /etc/rc.local -- # Add your local startup actions here. /usr/local/sbin/noip2 echo '.' -- When the machine is booted I get the mail, but I do not get the updates every 30 minutes as I should. Top shows the process 6013 _noip 20 428K 916K idle select0:00 0.00% noip2 Everything looks fine, but note that you didn't get noip from ports (so it may be incompatible with OpenBSD). Try posting your configuration, running noip in debug mode (if it has one), or switching to net/ddclient. Joachim I did get NO-IP from ports! I check out your suggestion. Thanks :-)
NO-IP not updating!
Hello list. I'm quite new to Openbsd, have used Freebsd for a while. I have a newly installed Openbsd system. OpenBSD machine01.no-ip.org 4.8 GENERIC.MP#335 amd64 Upon installation of noip I ran the command noip2 -C to configure it. I want noip to run a script every 30 minutes that sends a mail to me at the end of the updating of the address. So I choose the settings accordingly when configuring noip. I've put the following in my /etc/rc.local -- # Add your local startup actions here. /usr/local/sbin/noip2 echo '.' -- When the machine is booted I get the mail, but I do not get the updates every 30 minutes as I should. I cannot see if the the daemon starts because the line at the startup screen shows only starting local daemons:, The command: # ps -aux | grep noip Gives _noip 6013 0.0 0.2 428 916 ?? Is10:04AM0:00.01 /usr/local/sb Top shows the process 6013 _noip 20 428K 916K idle select0:00 0.00% noip2 If I kill that process and start noip2 from the command line it also sends the mail at start up but not after the following 30 minutes. I'm not sure whether noip is running every 30 minutes I've been tailing /var/log/messages and I cannot see anything related to noip there. Can anyone on this list point me in the right direction? Thanks /Leslie
Re: NO-IP not updating!
Abel Abraham Camarillo Ojeda skrev 2011-01-26 16:39: On Wed, Jan 26, 2011 at 3:56 AM, Leslie Jensenles...@eskk.nu wrote: Hello list. I'm quite new to Openbsd, have used Freebsd for a while. I have a newly installed Openbsd system. OpenBSD machine01.no-ip.org 4.8 GENERIC.MP#335 amd64 Upon installation of noip I ran the command noip2 -C to configure it. I want noip to run a script every 30 minutes that sends a mail to me at the end of the updating of the address. So I choose the settings accordingly when configuring noip. I've put the following in my /etc/rc.local -- # Add your local startup actions here. /usr/local/sbin/noip2 echo '.' -- When the machine is booted I get the mail, but I do not get the updates every 30 minutes as I should. I cannot see if the the daemon starts because the line at the startup screen shows only starting local daemons:, The command: # ps -aux | grep noip Gives _noip B B 6013 B 0.0 B 0.2 B 428 B 916 ?? B Is B B 10:04AM B B 0:00.01 /usr/local/sb Top shows the process 6013 _noip B B B 2 B B 0 B 428K B 916K idle B B B select B B 0:00 B 0.00% noip2 If I kill that process and start noip2 from the command line it also sends the mail at start up but not after the following 30 minutes. I'm not sure whether noip is running every 30 minutes I've been tailing /var/log/messages and I cannot see anything related to noip there. Can anyone on this list point me in the right direction? Thanks /Leslie cron(8), maybe? It is supposed to work as a daemon with no need for cron! /L
Re: OpenBSD 4.8 can't find CD drive on Dell Latitude E6500
Nick Holland skrev 2010-11-10 03:02: On 11/09/10 13:02, Leslie Jensen wrote: On 2010-11-09 18:00, Nick Holland wrote: On 11/09/10 10:37, Leslie Jensen wrote: ... Now I want to make an installation on a USB stick using the amd64 installation CD. ... Then comes the question of installation media and the choices are ftp http or done. I can do the installation via http so I'm ok. But I am wondering how do I do in order to find the CD-rom drive. My plan is to install OpenBSD on this machine in the future. booting from the CD is handled by the system BIOS, OpenBSD doesn't need to know how to access the CD to boot, as it isn't running at this point. Installing from the CD requires that OpenBSD be able to access the disk. It seems, for unknown reasons, there's something odd about your computer, and OpenBSD is not recognizing the CDROM. Install via network as you propose, then post the dmesg output, hopefully we can figure out where your CDROM is hiding and why it won't come out and play. As the CD and the disk system share the same interface, I wonder if your disk is going to be recognized at this point. Nick. This is what I've done! Boot from USB stick with hard drive present, both i386 and amd64. Issued command dmesg; sysctl hw.sensors dmesg_file_name.txt I noticed that the dmesg info did not make it to the file so I also did dmesg dmesg_file_name.txt After that I booted FreeBSD and did dmesg dmesg_file_name.txt The files are attached, if you need more info, let me know. Thanks /Leslie Interesting. No disks at all, hard or optical. I think the clue might be here: pciide0 at pci0 dev 31 function 2 Intel 82081HBM RAID rev 0x03: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI pciide0: using apic 2 int 19 (irq 10) for native-PCI interrupt I'm wondering if this little bit might be the issue: http://www.openbsd.org/faq/upgrade48.html#ahci-raid # ahci(4) no longer attaches to RAID-mode disks: To avoid risk of corrupting metadata on certain Intel RAID devices, ahci(4) no longer attaches to the PCI device IDs used by these controllers when set to RAID mode. If your SATA disk is attached to a ahci(4) contoller in RAID mode, it will vanish as part of the upgrade and require resetting the BIOS controller type to AHCI to get it back. Does your BIOS, by any chance, have a RAID mode option? Seems kinda odd for a laptop, but I'm short of other ideas, and that sure sounds like it fits. This is new for 4.8, you might want to try booting a 4.7 bsd.rd kernel and see if that sees your disks. Nick. I have put a picture of the BIOS settings here: http://www.eskk.nu/gallery/?album=/bios/picture=IMAG0115.jpgfullsize=0 Please advise me on what you think would be the best setting. Keeping in mind that I do not want to corrupt data on the hard drive. Thanks /Leslie
SOLVED Re: OpenBSD 4.8 can't find CD drive on Dell Latitude E6500
On 2010-11-10 11:14, Anders Trobdck wrote: I'm running 4.8 on a E6500 and my cd are working just fine but I'm using the AHCI mode! Br/Anders Thank you all who replied, with you help I have managed to solve my problem. :-) With a lot of fiddeling with Win7 after Goggle had found people with the same problem, I managed to get Win7 to start with bios set to AHCI. OpenBSD 4.8 now finds all the drives and I'm happy :-) Thanks :-) /Leslie
OpenBSD 4.8 can't find CD drive on Dell Latitude E6500
Hello list. I'm quite new to OpenBSD, have made one installation in Virtualbox plus an installation on a USB stick on a 32-bit pc. Now I want to make an installation on a USB stick using the amd64 installation CD. The machine Dell Latitude E6500 is currently running Win7 plus FreeBSD 8.1 in a dual boot configuration. I removed the hard drive not to make a mistake, inserted the CD and the USB stick. Installation starts, when asked how to install on the stick I those use the whole (w) drive. Then comes the question of installation media and the choices are ftp http or done. I can do the installation via http so I'm ok. But I am wondering how do I do in order to find the CD-rom drive. My plan is to install OpenBSD on this machine in the future. Thanks /Leslie
Re: OpenBSD 4.8 can't find CD drive on Dell Latitude E6500
On 2010-11-09 18:00, Nick Holland wrote: On 11/09/10 10:37, Leslie Jensen wrote: ... Now I want to make an installation on a USB stick using the amd64 installation CD. ... Then comes the question of installation media and the choices are ftp http or done. I can do the installation via http so I'm ok. But I am wondering how do I do in order to find the CD-rom drive. My plan is to install OpenBSD on this machine in the future. booting from the CD is handled by the system BIOS, OpenBSD doesn't need to know how to access the CD to boot, as it isn't running at this point. Installing from the CD requires that OpenBSD be able to access the disk. It seems, for unknown reasons, there's something odd about your computer, and OpenBSD is not recognizing the CDROM. Install via network as you propose, then post the dmesg output, hopefully we can figure out where your CDROM is hiding and why it won't come out and play. As the CD and the disk system share the same interface, I wonder if your disk is going to be recognized at this point. Nick. This is what I've done! Boot from USB stick with hard drive present, both i386 and amd64. Issued command dmesg; sysctl hw.sensors dmesg_file_name.txt I noticed that the dmesg info did not make it to the file so I also did dmesg dmesg_file_name.txt After that I booted FreeBSD and did dmesg dmesg_file_name.txt The files are attached, if you need more info, let me know. Thanks /Leslie hw.sensors.cpu0.temp0=39.00 degC hw.sensors.cpu1.temp0=39.00 degC hw.sensors.acpitz0.temp0=44.50 degC (zone temperature) hw.sensors.acpiac0.indicator0=On (power supply) OpenBSD 4.8 (GENERIC.MP) #335: Mon Aug 16 09:09:20 MDT 2010 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 3744780288 (3571MB) avail mem = 3631280128 (3463MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf6530 (57 entries) bios0: vendor Dell Inc. version A24 date 08/19/2010 bios0: Dell Inc. Latitude E6500 acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP HPET DMAR APIC ASF! MCFG TCPA SLIC SSDT acpi0: wakeup devices PCI0(S4) PCIE(S4) USB1(S0) USB2(S0) USB3(S0) USB4(S0) USB5(S0) USB6(S0) EHC2(S0) EHCI(S0) AZAL(S3) RP01(S4) RP02(S4) RP03(S4) RP04(S3) RP05(S3) RP06(S5) LID_(S3) PBTN(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM)2 Duo CPU P9500 @ 2.53GHz, 2527.40 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG cpu0: 6MB 64b/line 16-way L2 cache cpu0: apic clock running at 266MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM)2 Duo CPU P9500 @ 2.53GHz, 2527.00 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG cpu1: 6MB 64b/line 16-way L2 cache ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 2 acpiprt0 at acpi0: bus 3 (PCIE) acpiprt1 at acpi0: bus 1 (AGP_) acpiprt2 at acpi0: bus 11 (RP01) acpiprt3 at acpi0: bus 12 (RP02) acpiprt4 at acpi0: bus 13 (RP03) acpiprt5 at acpi0: bus 14 (RP04) acpiprt6 at acpi0: bus -1 (RP05) acpiprt7 at acpi0: bus -1 (RP06) acpiprt8 at acpi0: bus 0 (PCI0) acpiec0 at acpi0 acpicpu0 at acpi0: C3, C2, C1, PSS acpicpu1 at acpi0: C3, C2, C1, PSS acpitz0 at acpi0: critical temperature 107 degC acpibtn0 at acpi0: LID_ acpibtn1 at acpi0: PBTN acpibtn2 at acpi0: SBTN acpiac0 at acpi0: AC unit online acpibat0 at acpi0: BAT0 not present acpibat1 at acpi0: BAT1 not present acpivideo0 at acpi0: VID_ acpivout0 at acpivideo0: CRT_ acpivout1 at acpivideo0: LCD_ acpivout2 at acpivideo0: DVI_ acpivout3 at acpivideo0: DVI2 acpivout4 at acpivideo0: DP__ acpivout5 at acpivideo0: DP2_ acpivideo1 at acpi0: VID_ acpivout6 at acpivideo1: CRT_ acpivout7 at acpivideo1: LCD_ acpivout8 at acpivideo1: DP__ acpivout9 at acpivideo1: DP2_ acpivout10 at acpivideo1: DVI_ acpivout11 at acpivideo1: DVI2 acpivideo2 at acpi0: VID2 cpu0: Enhanced SpeedStep 2527 MHz: speeds: 2535, 2534, 1600, 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 Intel GM45 Host rev 0x07 ppb0 at pci0 dev 1 function 0 Intel GM45 PCIE rev 0x07: apic 2 int 16 (irq 0) pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 NVIDIA Quadro NVS 160m rev 0xa1 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) em0 at pci0 dev 25 function 0 Intel ICH9 IGP M AMT rev 0x03: apic 2 int 22 (irq 11), address 00:21:70:a9:4a:12 uhci0 at pci0 dev 26 function 0 Intel 82801I USB rev 0x03: apic 2 int 20 (irq 10) uhci1 at pci0 dev 26 function 1 Intel 82801I USB rev 0x03: apic 2 int 21 (irq 3