?
ifconfig-kdump.result.2021-12-17_12-34
Description: Binary data
"Theo de Raadt" writes:
> Claudio Jeker wrote:
>
>> On Thu, Dec 16, 2021 at 03:55:43PM +0800, Vladimir Nikishkin wrote:
>> > Hello, everyone
>> >
>> > Recently I had a
.
What am I doing wrong? Is there something specific that needs to be
permitted to profile ifconfig?
--
Your sincerely,
Vladimir Nikishkin (MiEr, lockywolf)
(Laptop)
those who are, comment on that issue.
--
Your sincerely,
Vladimir Nikishkin (MiEr, lockywolf)
(Laptop)
Go.pm does not expect to be called the second time with a name.
Hope this helps.
--
Your sincerely,
Vladimir Nikishkin (MiEr, lockywolf)
(Laptop)
This has actually been reported before:
https://www.mail-archive.com/bugs@openbsd.org/msg14189.html
Jean-Pierre de Villiers writes:
> On 21/08/11 04:34pm, Vladimir Nikishkin wrote:
>> I do not think my setup is related to "TLS Inspection".
>
> Apologies, my misunders
6:15, Jean-Pierre de Villiers
wrote:
>
> On 21/08/11 02:40pm, Vladimir Nikishkin wrote:
> > However, if I keep "with tls", the requests to port 81 are going
> > encrypted, and are failing with the following message in relayd logs:
> > `SSL routines:ST_CONNECT:tlsv1
going
encrypted, and are failing with the following message in relayd logs:
`SSL routines:ST_CONNECT:tlsv1 alert protocol version`,
`TLS handshake error: handshake failed:`.
There should not be any TLS handshakes at port 81, because the backend
at port 81 is http-only.
Could someone verify that this is the ca
t, obviously, the laptop does not work then.
How to correct the setup?
--
Your sincerely,
Vladimir Nikishkin (MiEr, lockywolf)
(Laptop)
w fresh structures are initialised in OpenBSD) In
either case, it is not useful.
In effect, `ndp -s ` always fails, because this check is
always false.
--
Your sincerely,
Vladimir Nikishkin (MiEr, lockywolf)
(Laptop)
o have the adoption rate of 33%, not such an uncommon
thing any more.
--
Your sincerely,
Vladimir Nikishkin (MiEr, lockywolf)
(Laptop)
On Wed, Dec 5, 2012 at 5:10 AM, lilit-aibolit lilit-aibo...@mail.ru wrote:
inet 192.168.55.254 255.255.255.0 NONE -inet6 media autoselect mode 11g \
mediaopt hostap chan 8 nwid namewifi \
I'd use the 'wpakey' keyword in /etc/hostname.rum0 like so:
inet 192.168.55.254 255.255.255.0 NONE
that's how this service is designed (what you see as pseudowire)
is there a roadmap for L2/pseudowire support?
cheers!
Vladimir
On Mon, Nov 8, 2010 at 10:08 AM, Claudio Jeker cje...@diehard.n-r-g.comwrote:
OK, those packets look like PWE3 encapsulated ethernet frames. mpe(4) only
supports L3
, small enough?
cheers!
Vladimir
On Sun, Nov 7, 2010 at 11:02 PM, Doug Clements dcleme...@gmail.com wrote:
Hi,
From the man page for bridge (4):
If an IP packet is too large for the outgoing interface, the bridge
will
perform IP fragmentation. This can happen when bridge
at the same time i see some family 33 header,
prepending the payload of original packet starting with the mpls header, see
attachment: data-packet.png
i run a custom 4.8 kernel on i386 with MP, MPLS and mpe enabled
cheers!
Vladimir
[demime 1.01d removed an attachment of type image/png which had
see pcap's attached,
On Fri, Nov 5, 2010 at 4:08 PM, Claudio Jeker cje...@diehard.n-r-g.comwrote:
On Fri, Nov 05, 2010 at 03:43:07PM +0100, Vladimir Ostrovskiy wrote:
Hello All,
a question:
Please just include tcpdump -nvi vic1 -X and tcpdump -nvi gre0 -X output.
Tcpdump is in base
13000 - POP mpe0 T 0 0 - 4 mpe0
13001 - POP mpe1 T 0 14 - 4 mpe1
On Fri, Nov 5, 2010 at 4:08 PM, Claudio Jeker cje...@diehard.n-r-g.comwrote:
On Fri, Nov 05, 2010 at 03:43:07PM +0100, Vladimir Ostrovskiy wrote:
Hello All,
a question:
Please just include tcpdump -nvi vic1 -X and tcpdump
PM, Claudio Jeker cje...@diehard.n-r-g.com
wrote:
On Fri, Nov 05, 2010 at 03:43:07PM +0100, Vladimir Ostrovskiy wrote:
Hello All,
a question:
Please just include tcpdump -nvi vic1 -X and tcpdump -nvi gre0 -X
output.
Tcpdump is in base for a reason. Include route -n show -mpls
On 11:43 Thu 12 Aug, Darrin Chandler wrote:
On Thu, Aug 12, 2010 at 01:07:47PM +0200, Tomas Vavrys wrote:
2010/8/12 Ingo Schwarze schwa...@usta.de:
Oh, and also note that OpenBSD and vim is a weird topic. OpenBSD
and nvi or OpenBSD and mg would seem more natural. On the other
hand,
On 15:32 Tue 05 Jan, Jonathan Thornburg wrote:
Very minimalist:
No xdm -- I login and type 'startx;logout'.
startx() {
pgrep startx wsconsctl display.focus=4 \
|| (/usr/X11R6/bin/startx ~/.startx.out )
lock -pn
}
(zsh)
Might be useful and more convinient
iirc core dump format was changed to elf(5) sometime
around when PIE was imported, you probably need older gdb
On 20:38 Thu 08 Oct, openbsd.misc.tmp openbsd.misc.tmp wrote:
Hi!
I have an application that in very seldom cases causes core dumps on about a
dotzen machines that are located on
On 16:42 Thu 27 Nov, Morris, Roy wrote:
Hmmm, thanks. I think I'll take the rm -r route.
Sounds like I fracked something up for sure.
cvsco from ports/devel/cvsutils might be a better way to fix a screwed
up tree then (less traffic).
--
Vladimir Kirillov
saying this so that people
who may critically rely on this can make proper evaluation.
Vladimir
Reyk Floeter wrote:
my recommendation is to stay away from this list if you're not able to
send useful bug reports. i use relayd in many production setups and
it works just fine; of course
something along these lines
for i in `pfctl -a 'relayd/*' -vvsA | sed 's,^.*relayd/,,'`
do
pfctl -a relayd/$i -Fa
etc. etc.
Vladimir
David Caro wrote:
first of all, sorry for my english (i'm spaniard)
i have two testing firewalls running OpenBSD 4.3 -release (fresh install),
with carp
from this post
http://fixunix.com/bsd/87865-nat-ipsec-openbsd-pf-isakmpd.html
however I was unsuccessful. I have currently resorted to using a HAproxy
to proxy the traffic.
Vladimir
BARDOU Pierre wrote:
Hello,
I am trying to setup an IPsec connection.
Here is the ipsec.conf :
ike esp
over enc0 doesn't work.
I would appreciate any help.
Thanks,
Vladimir
recompiled kernel -- sound works again.
If needed, I could track down exact revision that causes the problem.
Here's dmesg, GAMMA = GENERIC.MP + NTFS
Hi!
Show us the outputs of mixerctl -va and audioctl too please,
--
Vladimir Kirillov
http://darkproger.net
to
-current could be the only right answer, not just playing with diffs)
My bad.
--
Vladimir Kirillov
http://darkproger.net
sysctl?
any help will be greatly appreciated. I run webservers on this box.
looks like this is fixed in -current, see
http://article.gmane.org/gmane.os.openbsd.cvs/79457
--
Vladimir Kirillov
http://darkproger.net
On 14:44 Fri 10 Oct, Beavis wrote:
thanks for the reply vladimir.
is it needed to upgrade my 4.3 stable to -current? isn't there a patch
available for this?
The 4.3 uvm_map.c is 5 diffs far from this patch
http://www.openbsd.org/cgi-bin/cvsweb/src/sys/uvm/uvm_map.c?r1=1.104#rev1.104
you can
On 19:25 Fri 10 Oct, Beavis wrote:
Vladimir,
Sorry to bother you but I tried to apply the patch on uvm_map.c
i copied the patch you gave me here and run
patch -p0 uvm_map.patch
I get some rej. files. any pointers or help will be greatly
appreciated from anyone.
you should do
On 19:25 Fri 10 Oct, Beavis wrote:
Vladimir,
Sorry to bother you but I tried to apply the patch on uvm_map.c
i copied the patch you gave me here and run
patch -p0 uvm_map.patch
I get some rej. files. any pointers or help will be greatly
appreciated from anyone.
or probably copy
for me.
--
Vladimir Kirillov
http://darkproger.net
try these:
outputs.speaker3.eapd=on
outputs.headphones.eapd=on
they worked for me.
--
Vladimir Kirillov
record.buffer_size=65536
record.block_size=8704
record.errors=0
--
Vladimir Kirillov
of playback:
$ aucat -r 22000 -i file.raw
/dev/audio: can't set audio params to s16le,0:1,22000Hz: Invalid
argument
--
Vladimir Kirillov
)
--
Vladimir Kirillov
On 16:37 Thu 02 Oct, Jacob Meuser wrote:
hmm, you did
$ aucat -o file.raw
$ aucat -i file.raw
and the sound played at the wrong rate? try
$ aucat -R 48000 -o file.raw
$ aucat -r 48000 -i file.raw
didn't work for me.
--
Vladimir Kirillov
On 12:55 Sun 21 Sep, [EMAIL PROTECTED] wrote:
/etc/boot.conf:
set tty com0
stty com0 38400
I think it's better to set com speed _before_ setting com0 as tty, it
can start throwing garbage into console, as it was spectated on soekris
net4801:
stty com0 38400
set tty com0
...
--
Vladimir
anyway. The return status is 0 unless the shell is
a login shell and -f is not supplied, or if job
control is not enabled.
--
Vladimir Kirillov
MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
I rename my configuration file to OpenBSD,but in dmesg its also
GENERIC,how can I change it?
Hi!
Try reading OpenBSD FAQ about compiling and read config(8)
--
Vladimir Kirillov
dump on sd0b
kqemu: kqemu version 0x00010300 loaded, max locked mem=1043660kB
DDB symbols added: 188320 bytes
--
Vladimir Kirillov
http://darkproger.net
Potovani
U prolici smo da Vam ponudimo najnoviju mogicnost zarade.
Uskoro na naim prostorima pocinje da radi Lyoness
Na vrijeme zauzmite svoje mjesto u ovom perspektivnom poslu.
Uclanjenje je potpuno besplatno-nita ne rizikujete.
Informiite se http://lyonesszarada.50webs.com
on vlan1 proto tcp to 10.0.5.200 port $ports_web - 10.0.5.81
Thanks,
Vladimir
. Googling this may help you
http://archives.neohapsis.com/archives/openbsd/2006-10/1206.html
Vladimir
In order to get familiar with CARP, i have set up a playground with 3
machines under vmware. I noticed that the CARP devices do not see any
IP broadcasts, so this would make CARP unusable for a DHCP
there may be some
routing confusion however I even tried setting up another totally
different physical interface, created carp10 and IP 10.0.1.200
redirecting to 10.0.5.81 with the same effect.
Any help would be appreciated.
Thanks,
Vladimir
subnet so the
path is really
client (10.0.1.50) - firewall (10.0.1.1) - firewall (10.0.5.200) -
rdr - server (10.0.5.81 = gw is 10.0.5.1)
Vladimir
.
Vladimir. Y. Plotnikov, http://www.smartwebco.com
=2M
set-variable = write_buffer=2M
[mysqlhotcopy]
interactive-timeout
Where is my error in configuration?
I tired to download and install fresh stable mysql-4 brach but I got
same result.
--
Thank you.
Vladimir. Y. Plotnikov,
http://www.smartwebco.com/
Thank you, gays.
login.conf adapted and problem solved
(tested on mysqldump --all-databases /dev/null)
TCP network (/29) and one IP and alias
on every machine.
When I pass ping internal machine from external hosts - all going fine.
When I try to telnet internal machine 22 - I got connection timed out.
But I see packets on external interface of my gateway.
Where I'm wrong?
--
Thank you.
Vladimir
) working (incoming traffic
only, but replies should pass to this network, of course).
What do think, it is possible, to use interface and alias for resolve
source routing?
No ways for create new one physical link for new one interface :-(.
--
Thank you.
Vladimir. Y. Plotnikov, http://www.smartwebco.com
incoming connections from another host (dig server.name @this.host)
thank you for help!
--
Thank you.
Vladimir. Y. Plotnikov, http://www.smartwebco.com/ Cell Phone +420-774-311-015
ICQ: 24270826, skype ID: vladimirplotnikov
port 20 (ftp-data)
vladimir plotnikov wrote:
Hello!
Sorry for stupid question.
part of pf.conf:
pass in on $ext_if proto tcp from any to any port 21 keep state
pass in on $ext_if proto tcp from any to any port 49151 keep state
...
block return-rst in log on $ext_if proto
/ --
GPG fingerprint: 9D3F 395A DAC5 5CCC 9066 151D 0A6B 4098 0C55 1484
--
Thank you.
Vladimir. Y. Plotnikov, http://www.smartwebco.com/. Cell Phone +420-774-311-015
ICQ: 24270826, skype ID: vladimirplotnikov
for prevent data lost.
How we can setup hardware or software mirroring with leave 1st drive
live? without dump/restore ?
--
Thank you.
Vladimir. Y. Plotnikov, BasalPro + SmartWeb LTD. Cell Phone +420-774-311-015
ICQ: 24270826, skype ID: vladimirplotnikov
Quoting ed [EMAIL PROTECTED]:
Zone transfers are on tcp/53, DNS lookups are 53/udp, so:
pass in on $ext_if proto udp from any to $DNS port 53 keep state
and if required:
pass in on $ext_if proto tcp from $ext_net to $DNS port 53 keep state
I use TinyDNS here, so we don't really need to
56 matches
Mail list logo
