Antoine, I actually did use that repo for building and running openbsd on AWS.
Unfortunately, I don't have access to physical openbsd machine to create vmdk
now.
So, I had to resort to running qemu and installing openbsd there, followed by
the
steps I outlined below.
There was a community AMI
d, converted qcow2 to raw
> and then with vmdktool converted raw to vmdk.
> AWS recognized vmdk with out any issue and booted it. But no xnf0 interfaces
> were detected.
Try this. Somehat ugly but it works for me (tm).
https://github.com/ajacoutot/aws-openbsd
OK, thanks to Mike and Antoine!
I tried with t2 instances (current generation - the only choice present), yet
still no dice. Perhaps, the issue is with how I created the image.
I used qemu, created qcow2, installed openbsd, converted qcow2 to raw
and then with vmdktool converted raw to vmdk.
AWS
On Tue, Oct 24, 2023 at 10:40:34PM +, All wrote:
> Hi,
>
> There was a time when we could run OpenBSD on AWS.
> Antoine Jacoutot did a great work to make that possible.
> These days, xnf0 interface is not being initialized. Xen is being
> identified as Xen 4.11 (12?) but
Hi,
There was a time when we could run OpenBSD on AWS.
Antoine Jacoutot did a great work to make that possible.
These days, xnf0 interface is not being initialized. Xen is being
identified as Xen 4.11 (12?) but no xnf interfaces are sowing up
after boot. NetBSD has xennet0 being initiated
Thank you. I reviewed that approach. I don't have a proper machine (machine
with vmm) to give this a try.
Although I do wish to know what is wrong with my approach. If the
aws-openbsd works then this approach should also work. Its more
accessible. Both are using /dev/sda1 for the EBS device name
Try with this https://github.com/shazaum/aws-openbsd
Em sáb, 6 de mai de 2023 15:42, Sandeep Gupta
escreveu:
> I have installed openbsd 7.3 image on a EBS volume. Then created an AMI
> image and launched an instance
> from this image. Looked promising as I can see initial boot
Finally built all the providers I need for GCP, AWS, and local from Go sources
and put them in appropriate place to look by Terraform.
Works like a charm with modern providers. It seems it isn't needed to put them
into ports, but having builds for openbsd_amd64 in Terraform repo should be
fine
..
> - Finding latest version of hashicorp/aws...
> Error: Incompatible provider version
> Provider registry.terraform.io/hashicorp/aws v3.47.0 does not have a
> package available for your current platform, openbsd_amd64.
This is a very recent version of the AWS provider, which
Hello,
I remember that for earlier versions of terraform all providers were
available as OpenBSD packages/ports, that is now changed.
$ terraform init
Initializing the backend...
Initializing provider plugins...
- Finding latest version of hashicorp/aws...
Error: Incompatible provider
itializing provider plugins...
> - Finding latest version of hashicorp/aws...
> Error: Incompatible provider version
> Provider registry.terraform.io/hashicorp/aws v3.47.0 does not have a
> package available for your current platform, openbsd_amd64.
> Provider releases ar
On Mon, May 17, 2021 at 12:28:39AM +0300, Ilya Voronin wrote:
> I was able to fix boot error on t3a (AMD EPYC based) instances (kernel:
> protection fault trap at lapic_set_lvt:rdmsr) with this patch (tested
> against 6.9):
>
> Index: arch/amd64/amd64/lapic.c
>
I was able to fix boot error on t3a (AMD EPYC based) instances (kernel:
protection fault trap at lapic_set_lvt:rdmsr) with this patch (tested
against 6.9):
Index: arch/amd64/amd64/lapic.c
===
RCS file:
instances
to post them here.
On 06.10.20 07:50, Kirill Peskov wrote:
> Hi All!
>
> Not so long time ago I've got the challenge to fire up OpenBSD instance
> in AWS. It was almost out-of-the-box successful with just a few manual
> post-configs... However, with recently introduced &qu
Hi All!
Not so long time ago I've got the challenge to fire up OpenBSD instance
in AWS. It was almost out-of-the-box successful with just a few manual
post-configs... However, with recently introduced "Nitro" hypervisor
(heavily streamlined KVM) old methods of hacking OpenBSD into
On Wed, Sep 4, 2019 at 12:56 PM Pavel Korovin wrote:
> The logs showed where it stuck:
>
> pciide0:0:0: not ready, st=0x0, err=0x00
> wd0c: device timeout reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
> pciide0:0:0: not ready, st=0x0, err=0x00
> wd0c: device timeout reading fsbn 0 (wd0 bn
Dear all,
Today I've got some headache after upgrading OpenBSD-current running on
AWS. Usually I upgrade twice a month using ansible. Last time I
upgraded it on Aug 13. Today I started upgrade to the snapshot built on
Sep 2, the instance didn't boot.
The logs showed where it stuck:
pciide0:0:0
Folks,
I was able to get OpenBSD working on AWS thanks to an awesome script
by ajacoutot@ : https://github.com/ajacoutot/aws-openbsd
Everything seems to be working great, except I've had difficulty
getting IPv6 working properly.
AWS unfortunately uses DHCPv6 rather than slaac for IPv6 address
Hi Folks,
I was able to get OpenBSD working on AWS thanks to an awesome script by
ajacoutot@ : https://github.com/ajacoutot/aws-openbsd
Everything seems to be working great, except I've had difficulty getting
IPv6 working properly.
AWS unfortunately uses DHCPv6 rather than slaac for IPv6
egon: 6.3, and maybe 5.9
> Frankfurt: 6.1, 6.2, 6.3, 6.3b (its named 6.3b)
> Ireland: 6.0, 6.1, 6.2
>
> I'm surprised to find none for Canada region (the home OpenBSD?)
>
> Is it due to the AWS limiting any community AMI uploaded to its own region
> only?
>
> Anyways, the
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
I have done that, but when I search in community AMI, there is no OpenBSD. It
returns a empty result.
Does this have something to do with Amazon region?
-BEGIN PGP SIGNATURE-
Version: ProtonMail
Comment: https://protonmail.com
Hi Ahmad,
I am in Ireland and it works.
When I changed the region to India it could not find the AMI.
Suggest changing region to Europe/Ireland.
Oddly enough it didn't work when I changed to London either.
On Thu, 29 Nov 2018 at 23:05, Ahmad Bilal wrote:
> -BEGIN PGP SIGNED MESSAGE-
>
Hi Ahmad,
Go to your EC2 Dashboard and click launch instance
Click Community AMI's
Search OpenBSD
Select the instance that best suits you and from there it is like setting up
any other AWS AMI
The most recent OpenBSD instance is 6.2, but you can do the normal upgrade
to get it to 6.3
Hope
-BEGIN PGP SIGNED MESSAGE-
I want to install openbsd on AWS, I wanted a official guide to do that.
In case someone suggested vultr: no I dont want vultr.
Sent from ProtonMail mobile
\ Original Message
On 29 Nov 2018, 23:25, Michael Joy < mich...@michaeljoy
Hi,
Perhaps I've missed something. What do you need to set up using
this guide?
On Thu, 29 Nov 2018 at 17:41, Jungle Boogie wrote:
> On Thu 29 Nov 2018 1:07 PM, Ahmad Bilal wrote:
> > -BEGIN PGP SIGNED MESSAGE-
> > Hash: SHA256
> >
> > I was hoping if there is a official how-to-guide.
On Thu 29 Nov 2018 1:07 PM, Ahmad Bilal wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA256
>
> I was hoping if there is a official how-to-guide. Or at least semi-official.
What official how-to-guide did you follow for vultr?
efinitely possible, and I have been running openbsd on AWS for a
> few years.
>
> When I initially set it up, I used the following:
> https://github.com/ajacoutot/aws-openbsd
>
> But there are other ways to do it, as outlined by the following (which I
> have no tried yet) : ht
Hello Ahmad,
Yes, it is definitely possible, and I have been running openbsd on AWS for a
few years.
When I initially set it up, I used the following:
https://github.com/ajacoutot/aws-openbsd
But there are other ways to do it, as outlined by the following (which I
have no tried yet) : http
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
Hi Everyone or Salaam
Is there a easy way to use OpenBSD on AWS EC2? I'm looking for guide to do so,
if its possible. I know about Vultr, but no I don't want to switch from AWS
just yet.
I'm currently running FreeBSD on Lightsail.
Sent
On 10.09.18 09:08, Jordan Geoghegan wrote:
On 09/09/18 07:05, Monah Baki wrote:
Hi All,
I have a OpenBSD 6.3 server in Amazon AWS, and I am trying to install
from
ports letsencrypt. Install was running fine till I got a Fatal message
after it was done with the patching process
On 09/09/18 07:05, Monah Baki wrote:
Hi All,
I have a OpenBSD 6.3 server in Amazon AWS, and I am trying to install from
ports letsencrypt. Install was running fine till I got a Fatal message
after it was done with the patching process
...
Thanks
Monah
acme-client(1) is in base and is used
On 2018-09-09, Monah Baki wrote:
> Hi All,
>
> I have a OpenBSD 6.3 server in Amazon AWS, and I am trying to install from
> ports letsencrypt. Install was running fine till I got a Fatal message
> after it was done with the patching process
In most cases, ports is really int
Hi All,
I have a OpenBSD 6.3 server in Amazon AWS, and I am trying to install from
ports letsencrypt. Install was running fine till I got a Fatal message
after it was done with the patching process
===> Applying OpenBSD patch patch-setup_py
Hmm... Looks like a unified diff to me...
The t
why, wrong list ?
_
Zbyszek Żółkiewski
> Wiadomość napisana przez Mihai Popescu <mih...@gmail.com> w dniu 05.09.2017,
> o godz. 11:05:
>
>> Anyone on the list had problem with IPv6 on AWS?
>> Image (AMI) build from https://github.com/kolargol/openbsd-aws/ (O
Back
> when I had a need to use DHCPv6, I had good luck with the "wide-dhcpv6"
> package. Try installing that and see if you're able to pick up an
> address from the AWS servers.
other daemons running there...
>
>On Vultr, IPv6 addresses are assigned via SLAAC, not via DHCP6. Back
>when I had a need to use DHCPv6, I had good luck with the "wide-dhcpv6"
>package. Try installing that and see if you're able to pick up an
>address from the AWS server
"wide-dhcpv6"
package. Try installing that and see if you're able to pick up an
address from the AWS servers.
--
To find a friend one must close one eye; to keep him -- two.
-- Norman Douglas
pretty much - yes - i use IPv6 on other OS-es where dhcpv6 is used on AWS...
_
Zbyszek Żółkiewski
> Wiadomość napisana przez Stephane HUC PengouinBSD <b...@stephane-huc.net> w
> dniu 05.09.2017, o godz. 12:23:
>
> Hi...
>
> Are you sure than AWS provide dhcpv6? or slaac?
Hi...
Are you sure than AWS provide dhcpv6? or slaac?
Le 09/05/17 à 11:45, Zbyszek Żółkiewski a écrit :
> Thanks, but it also do not work:
>
> cat /etc/host
ttps://en.wikipedia.org/wiki/IPv6#Stateless_address_autoconfiguration_.28SLAAC.29
>
> 2017-09-05 11:27 GMT+02:00 Zbyszek Żółkiewski <zbys...@onefellow.com>:
> AWS uses DHCP, so i need DHCP to configure it, when i do manually:
>
> ifconfig xnf0 inet6 2a05:d018:501:3802:82b7:5ec2:6403:992b/64 autoconf u
AWS uses DHCP, so i need DHCP to configure it, when i do manually:
ifconfig xnf0 inet6 2a05:d018:501:3802:82b7:5ec2:6403:992b/64 autoconf up
then:
# ping6 google.com
PING google.com (2a00:1450:400b:c03::66): 56 data bytes
64 bytes from 2a00:1450:400b:c03::66: icmp_seq=0 hlim=49 time=1.148 ms
64
Hi...
Perhaps, It is possible that I did not understand the question!
But :
- for OpenBSD 6.1, use 'ipv6 autoconf' into your iface file
- for oldiers OpenBSD, use 'rtsol'.
Le 09/05/17 à 11:12, Zbyszek Żółkiewski a écrit :
>>
>> Wiadomość napisana przez Peter Hessler w
>
> Wiadomość napisana przez Peter Hessler w dniu
> 05.09.2017, o godz. 11:05:
>
> OpenBSD's dhclient is IPv4 only. We do not have an IPv6 DHCP client in
> base.
how does it works then on vultr for example where in same setup IPv6 is leased
from DHCP? I do not see any
> Anyone on the list had problem with IPv6 on AWS?
> Image (AMI) build from https://github.com/kolargol/openbsd-aws/ (OpenBSD 6.1)
Wrong list! That project should stop using openbsd in its name, I think.
On 2017 Sep 05 (Tue) at 10:58:41 +0200 (+0200), Zbyszek Żółkiewski wrote:
:Hello all,
:
:Anyone on the list had problem with IPv6 on AWS?
:Image (AMI) build from https://github.com/kolargol/openbsd-aws/ (OpenBSD 6.1)
:
:cat /etc/hostname.xnf0
Hello all,
Anyone on the list had problem with IPv6 on AWS?
Image (AMI) build from https://github.com/kolargol/openbsd-aws/ (OpenBSD 6.1)
cat /etc/hostname.xnf0
On 1 November 2016 at 16:46, zack <zackj...@yandex.com> wrote:
> Hi,
>
> I'm running OpenBsd 6.0 instance on AWS using the public AMI. Attached
> EBS volume as /dev/xvda as i found in previous discussion, but it don't
> seems to get detected on the instance, nothing shows up o
Hi,
I'm running OpenBsd 6.0 instance on AWS using the public AMI. Attached
EBS volume as /dev/xvda as i found in previous discussion, but it don't
seems to get detected on the instance, nothing shows up on dmesg nor i
can't find the new device. How does this attached volume appear on the
instance
On Sun, Feb 21, 2016 at 01:37:21AM -0500, Predrag Punosevac wrote:
> Hi Guys,
>
> Any updates on this? I am toying with AWS in the case one of my lab's
> projects has to be moved to thier infrastructure. I just played creating
> network gateway/firewall using Colin Percival's Fr
Hi Guys,
Any updates on this? I am toying with AWS in the case one of my lab's
projects has to be moved to thier infrastructure. I just played creating
network gateway/firewall using Colin Percival's FreeBSD. Works OK but
having OpenBSD latest PF, relayd, httpd, and other goodies sure would
So the public images are probably from me - they
aren't official and I didn't publish the ami IDs, so there is no way
to verify it yet.
These images are not meant to replace your own images - but they can
help to test, play and to get started.
> You can play with this if you're brave:
> https
imon
> >
> I have a relatively simple process involving the use of vmimport.
>
> Basically, build out the VM how you want (I used VirtualBox, but YMMV),
> then ran something like ec2-import-volume to bring the VHD into AWS.
> Once that was complete, I booted up an A
ting the public ones.
> > >
> > > If the builder of the public AMIs is reading this, I'd love to hear what
> > > your process is.
> > >
> > > Thanks,
> > > Simon
> > >
> > I have a relatively simple process involving the use of vmimport
'd love to hear what
> your process is.
You can play with this if you're brave:
https://github.com/ajacoutot/aws-openbsd
It's kind of ugly but should do the job. Once vmm is in GENERIC, I'll script
something around it instead.
--
Antoine
then ran something like ec2-import-volume to bring the VHD into AWS.
Once that was complete, I booted up an Amazon Linux instance, stopped it,
detached the root volume, attached the OpenBSD volume as /dev/xvda, then
booted up into OpenBSD. Afterwards, create an AMI of your work.
Also not
Hi all,
Now that the Xen guest stuff is getting some love, I think it would be
fun to toy around with OpenBSD on EC2 (particularly because of EBS --
other VPS providers like the old standby ARP Networks don't allow you to
attach copious amounts of storage to a low-spec system).
There are a
group modp1024 lifetime 28800 \
quick auth hmac-sha1 enc aes-128 group modp1024 lifetime 3600 \
srcid 89.145.186.243 psk ***
=== AWS VPC VPN Configuration IPSec Tunnel #1 ===
#1: Internet Key Exchange Configuration
Configure the IKE SA as follows
- Authentication Method: Pre-Shared
57 matches
Mail list logo