Re: Amv7 support sunxi SoC router board Lamobo R1 (BPi-R1)?
On Fri, Jan 02, 2015 at 11:11:18AM +0800, f5b wrote: > Does Amv7 support sunxi SoC router board Lamobo R1 (BPi-R1)? It's armv7, not amv7. I have a Banana Pi which can load OpenBSD but won't complete the boot. Allwinner A20 still has some issues. There is a topic which discuss some of these issues on tech@: http://marc.info/?l=openbsd-tech&m=141227625722523&w=2 Also check the a...@openbsd.org mailing list. Cheers, -- db
Re: Amv7 support sunxi SoC router board Lamobo R1 (BPi-R1)?
Hi f5b, On 1 January 2015 at 19:11, f5b wrote: > Does Amv7 support sunxi SoC router board Lamobo R1 (BPi-R1)? > > Lamobo R1 (BPi-R1) > > highlight: > 1. Allwinner A20 sunxi SoC > 2 .FIVE 10/100/1000 Ethernet port > 3. native 2.5 SATA disk port > 4. about $75 > > BPI- R1 - a 300Mbps Wireless N Router with both wired and wireless network, > Dual Core-CPU, 1G-RAM, GigaByte Ethernet, With two antennas > > website: > http://www.bananapi.com/index.php/component/content/article?layout=edit&id=59 Looks interesting. Does any of it require binary blobs to run? If so, then, I believe, openBSD won't run on it. -- --- inum: 883510009027723 sip: jungleboo...@sip2sip.info xmpp: jungle-boo...@jit.si
Amv7 support sunxi SoC router board Lamobo R1 (BPi-R1)?
Does Amv7 support sunxi SoC router board Lamobo R1 (BPi-R1)? Lamobo R1 (BPi-R1) highlight: 1. Allwinner A20 sunxi SoC 2 .FIVE 10/100/1000 Ethernet port 3. native 2.5 SATA disk port 4. about $75 BPI- R1 - a 300Mbps Wireless N Router with both wired and wireless network, Dual Core-CPU, 1G-RAM, GigaByte Ethernet, With two antennas website: http://www.bananapi.com/index.php/component/content/article?layout=edit&id=59 CPU A20 ARM Cortex™-A7 Dual-Core GPU ARM Mali400MP2Complies with OpenGL ES 2.0/1.1 Memory (SDRAM) 1GB DDR3 (shared with GPU) Onboard Storage Micro SD (Max. 64GB) card slot UP to 2T on 2.5 SATA disk Onboard Network 10/100/1000 Ethernet RJ45, WLAN @802.11b/g/n Video Input A CSI input connector allows for the connection of a designed camera module Video Outputs HDMI , LVDS/RGB Audio Output Audio Input 3.5 mm Jack and HDMI Microphone Power Source5 volt via Micro USB(DC In Only) USB 2.0 Ports USB Host and Micro USB (OTG) USB Host Buttons Reset button: Next to Power button Power button: Next to Battery connector GPIO(2X13) pin GPIO,UART,I2C bus ,SPI bus with two chip selects, CAN bus,ADC,PWM,+3.3v,+5v,ground. LED Power Key & RJ45 Remote IR OS Android 4.2, Linux Interface definition Produxt size148 mm × 100mm Weight 83g
