Re: HPLIP HP Laserjet Pro MFP M130fn PPD Plugin installation fails
On Sat, Jun 24, 2017 at 11:49:40AM -0500, rehcla wrote: > Hi Antoine, > > I can confirm that the Plugin installation works now for me: > > cd plugin_tmp/ > /local/bin/python2.7 plugin_install.py > > > Do you accept the license terms for the plug-in (y=yes*, n=no, q=quit) ? y > sh: lsb_release: not found > > Done. > > > But I still cant get the printer to work! > The good news it that scanning works now, but if I try to print I get an > error about the missing plugin. > > So here is what I did: > > - Installing hplip / hplip-gui and gtk+2-cups / gtk+3-cups > - doing the plugin installation shown above > > When I try to print a testpage hplip-systray says: required plugin not found! > > I did copy HP_LaserJet_MFP_M129-M134.ppd from /etc/cups/ppd/ to > /usr/local/share/foomatic/db/source/PPD/HP/ > (cause the gui setup is looking there), but no effect! > > What am I missing? Honestly, I don't know. Without direct access to the hardware, it's kind of hard for me to help any further. That specific printer maight not even be able to work on OpenBSD... The workaround and associated doc I made in the pkg-readme are theoretical because I don't have a printer that requires a plugin to be able to function properly. I've been told in the past that it worked (on some printers at least) but maybe not all? Sorry but I am afraid you are on you own on this one. If you find a way to make it work, please do share it and I'll add the required steps in the the pkg-readme. Thanks... > 15.06.2017, 09:41, "Antoine Jacoutot" : > > On Sun, Jun 04, 2017 at 07:09:19PM +0200, Reheis Claus wrote: > >> Hi all, > >> > >> Recently I acquired an HP Laserjet Pro MFP M130fn and I would like to > >> use it with my OpenBSD Deskop... > >> As it is supported since hplip 3.17 I have to use OpenBSD Current. > >> I managed to get until the plugin installation, but now I am stuck at > >> the point: > >> > >> /usr/local/bin/python2.7 plugin_install.py > >> > >> License blablabla > >> > >> Do you accept the license terms for the plug-in (y=yes*, n=no, q=quit) ? y > >> sh: lsb_release: not found > >> Plugin installation failed > >> error: Plugin installation failed > >> > >> Any advice? thx > > > > Hi. > > > > Thanks for the report. > > FWIW I just fixed it in current. > > > > -- > > Antoine > -- Antoine
Re: HPLIP HP Laserjet Pro MFP M130fn PPD Plugin installation fails
Hi Antoine, I can confirm that the Plugin installation works now for me: cd plugin_tmp/ /local/bin/python2.7 plugin_install.py Do you accept the license terms for the plug-in (y=yes*, n=no, q=quit) ? y sh: lsb_release: not found Done. But I still cant get the printer to work! The good news it that scanning works now, but if I try to print I get an error about the missing plugin. So here is what I did: - Installing hplip / hplip-gui and gtk+2-cups / gtk+3-cups - doing the plugin installation shown above When I try to print a testpage hplip-systray says: required plugin not found! I did copy HP_LaserJet_MFP_M129-M134.ppd from /etc/cups/ppd/ to /usr/local/share/foomatic/db/source/PPD/HP/ (cause the gui setup is looking there), but no effect! What am I missing? Thx Claus 15.06.2017, 09:41, "Antoine Jacoutot" : > On Sun, Jun 04, 2017 at 07:09:19PM +0200, Reheis Claus wrote: >> Hi all, >> >> Recently I acquired an HP Laserjet Pro MFP M130fn and I would like to >> use it with my OpenBSD Deskop... >> As it is supported since hplip 3.17 I have to use OpenBSD Current. >> I managed to get until the plugin installation, but now I am stuck at >> the point: >> >> /usr/local/bin/python2.7 plugin_install.py >> >> License blablabla >> >> Do you accept the license terms for the plug-in (y=yes*, n=no, q=quit) ? y >> sh: lsb_release: not found >> Plugin installation failed >> error: Plugin installation failed >> >> Any advice? thx > > Hi. > > Thanks for the report. > FWIW I just fixed it in current. > > -- > Antoine
Re: HPLIP HP Laserjet Pro MFP M130fn PPD Plugin installation fails
On Sun, Jun 04, 2017 at 07:09:19PM +0200, Reheis Claus wrote: > Hi all, > > Recently I acquired an HP Laserjet Pro MFP M130fn and I would like to > use it with my OpenBSD Deskop... > As it is supported since hplip 3.17 I have to use OpenBSD Current. > I managed to get until the plugin installation, but now I am stuck at > the point: > > /usr/local/bin/python2.7 plugin_install.py > > License blablabla > > Do you accept the license terms for the plug-in (y=yes*, n=no, q=quit) ? y > sh: lsb_release: not found > Plugin installation failed > error: Plugin installation failed > > Any advice? thx Hi. Thanks for the report. FWIW I just fixed it in current. -- Antoine
HPLIP HP Laserjet Pro MFP M130fn PPD Plugin installation fails
Hi all, Recently I acquired an HP Laserjet Pro MFP M130fn and I would like to use it with my OpenBSD Deskop... As it is supported since hplip 3.17 I have to use OpenBSD Current. I managed to get until the plugin installation, but now I am stuck at the point: /usr/local/bin/python2.7 plugin_install.py License blablabla Do you accept the license terms for the plug-in (y=yes*, n=no, q=quit) ? y sh: lsb_release: not found Plugin installation failed error: Plugin installation failed Any advice? thx Greetings Claus
