On 2008-02-24, Rolf Sommerhalder [EMAIL PROTECTED] wrote:
The kernel 4.3 GENERIC#662 i386 from the latest snapshot fails to
boot on WRAP, whereas it boots fine on ALIX and on other i386
machines. Whereas the kernel from the previous snapshot 4.3
GENERIC#661 i386 boots fine on WRAP and others, such as ALIX.
I couldn't find a copy of #662 but I don't see this with #663 on my WRAP...
PC Engines WRAP.1C/1D/1E v1.11
640 KB Base Memory
130048 KB Extended Memory
01F0 Master 848A 64MB CHH
Phys C/H/S 978/4/32 Log C/H/S 978/4/32
Using drive 0, partition 3;
Loading;...
probing: pc0 com0 pci mem[640K 127M a20=on]
disk: hd0
OpenBSD/i386 BOOT 3.01
switching console to com0
OpenBSD/i386 BOOT 3.01
boot testbsd
booting hd0a:testbsd: 5921584+873540 [52+307392+288398]=0x70c86c
entry point at 0x200120*
[ using 596216 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2008 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 4.3-beta (GENERIC) #663: Sat Feb 23 17:30:07 MST 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Geode(TM) Integrated Processor by National Semi (Geode by NSC
586-class) 267 MHz
cpu0: FPU,TSC,MSR,CX8,CMOV,MMX
cpu0: TSC disabled
real mem = 133791744 (127MB)
avail mem = 121454592 (115MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 11/08/05, BIOS32 rev. 0 @ 0xfc622
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf/0x1
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xe/0x8000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 Cyrix GXm PCI rev 0x00
puc0 at pci0 dev 13 function 0 Oxford OXmPCI954 rev 0x00: ports: 3 com
pccom3 at puc0 port 0 irq 12: st16650, 32 byte fifo
pccom4 at puc0 port 1 irq 12: st16650, 32 byte fifo
pccom5 at puc0 port 2 irq 12: st16650, 32 byte fifo
Oxford OXmPCI954 Disabled rev 0x00 at pci0 dev 13 function 1 not configured
sis0 at pci0 dev 14 function 0 NS DP83815 10/100 rev 0x00, DP83816A: irq 10,
address 00:0d:b9:04:92:d0
nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1
sis1 at pci0 dev 15 function 0 NS DP83815 10/100 rev 0x00, DP83816A: irq 9,
address 00:0d:b9:04:92:d1
nsphyter1 at sis1 phy 0: DP83815 10/100 PHY, rev. 1
sis2 at pci0 dev 16 function 0 NS DP83815 10/100 rev 0x00, DP83816A: irq 11,
address 00:0d:b9:04:92:d2
nsphyter2 at sis2 phy 0: DP83815 10/100 PHY, rev. 1
gscpcib0 at pci0 dev 18 function 0 NS SC1100 ISA rev 0x00
gpio0 at gscpcib0: 64 pins
NS SC1100 SMI rev 0x00 at pci0 dev 18 function 1 not configured
pciide0 at pci0 dev 18 function 2 NS SCx200 IDE rev 0x01: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: 64MB CHH
wd0: 1-sector PIO, LBA, 61MB, 125184 sectors
wd0(pciide0:0:0): using PIO mode 2
NS SCx200 AUDIO rev 0x00 at pci0 dev 18 function 3 not configured
geodesc0 at pci0 dev 18 function 5 NS SC1100 X-Bus rev 0x00: iid 6 revision 3
wdstatus 0
isa0 at gscpcib0
isadma0 at isa0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
spkr0 at pcppi0
gscsio0 at isa0 port 0x2e/2: SC1100 SIO rev 1: ACB1 ACB2
iic0 at gscsio0
iic1 at gscsio0
lmtemp0 at iic1 addr 0x48: lm77
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
biomask e1ef netmask efef ttymask ffef
nvram: invalid checksum
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
