Marcus Barczak wrote:
...
-- dmesg output --
ahc0 at pci0 dev 9 function 0 Adaptec AHA-2940U rev 0x00: irq 11
scsibus2 at ahc0: 16 targets
st0 at scsibus2 targ 4 lun 0: HP, C1537A, L706 SCSI2 1/sequential removable
st0: density code 0x8c, variable blocks, write-enabled
Has anyone seen this
On Monday 20 February 2006 18:47, Marcus Barczak wrote:
Just recently acquired a cast off Sun DDS3 SCSI tape drive. It's an
external unit and connected to my internal Adaptec 2940UW controller.
The problem i'm experiencing is anytime I try issuing a command with
mt for instance:
I have an
Nick Holland [EMAIL PROTECTED] writes:
Marcus Barczak wrote:
...
-- dmesg output --
ahc0 at pci0 dev 9 function 0 Adaptec AHA-2940U rev 0x00: irq 11
scsibus2 at ahc0: 16 targets
st0 at scsibus2 targ 4 lun 0: HP, C1537A, L706 SCSI2 1/sequential removable
st0: density code 0x8c, variable
On 21/02/2006, at 11:44 PM, Nick Holland wrote:
Alternate response:
If you know what parts of a dmesg we need to fix your problem, you
obviously can fix your own problem.
Fair call ... attached is a complete dmesg :) Further to that i've
experimented with the SCSI card BIOS by dropping
On 2/21/06, Marcus Barczak [EMAIL PROTECTED] wrote:
--- dmesg ---
OpenBSD 3.8 (NERF) #0: Fri Jan 20 13:35:16 EST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/NERF
uh oh. http://openbsd.org/faq/faq5.html#Why
--knitti
On 22/02/2006, at 11:39 AM, knitti wrote:
uh oh. http://openbsd.org/faq/faq5.html#Why
Ok .. i'm learning a few lessons here. I've tested with the stock
GENERIC kernel and am experiencing the same problem. Another very
generous list member emailed me off list asking me to build a kernel
Hi Guys,
Just recently acquired a cast off Sun DDS3 SCSI tape drive. It's an external
unit and connected to my internal Adaptec 2940UW controller. The problem i'm
experiencing is anytime I try issuing a command with mt for instance:
% mt -f /dev/rst0 status
The mt process will just hang,
Hi Guys,
Just recently acquired a cast off Sun DDS3 SCSI tape drive. It's an
external unit and connected to my internal Adaptec 2940UW
controller. The problem i'm experiencing is anytime I try issuing a
command with mt for instance:
% mt -f /dev/rst0 status
The mt process will just
Marcus Barczak [EMAIL PROTECTED] writes:
Just recently acquired a cast off Sun DDS3 SCSI tape drive. It's an
external unit and connected to my internal Adaptec 2940UW controller.
The problem i'm experiencing is anytime I try issuing a command with
mt for instance:
% mt -f /dev/rst0
9 matches
Mail list logo
