bioctl Device Support

2005-11-23 Thread Gaby vanhegan
HI, I've just upgraded to 3.8, hoping that ami/bioctl would support my RAID card, which it doesn't: ami0 at pci1 dev 14 function 1 Intel 80960RP ATU rev 0x02: irq 14 Dell 467/32b ami0: FW 1.06, BIOS v1p00, 128MB RAM ami0: 2 channels, 16 targets, 1 logical drives scsibus0 at ami0: 1 targets

Re: bioctl Device Support

2005-11-23 Thread Otto Moerbeek
On Wed, 23 Nov 2005, Gaby vanhegan wrote: HI, I've just upgraded to 3.8, hoping that ami/bioctl would support my RAID card, which it doesn't: ami0 at pci1 dev 14 function 1 Intel 80960RP ATU rev 0x02: irq 14 Dell 467/32b ami0: FW 1.06, BIOS v1p00, 128MB RAM ami0: 2 channels, 16

Re: bioctl Device Support

2005-11-23 Thread Gaby vanhegan
On 23 Nov 2005, at 20:00, Otto Moerbeek wrote: ami0 at pci1 dev 14 function 1 Intel 80960RP ATU rev 0x02: irq 14 Dell 467/32b ami0: FW 1.06, BIOS v1p00, 128MB RAM ami0: 2 channels, 16 targets, 1 logical drives scsibus0 at ami0: 1 targets sd0 at scsibus0 targ 0 lun 0: AMI, Host drive #00,

Re: bioctl Device Support

2005-11-23 Thread Gaby vanhegan
On 23 Nov 2005, at 20:10, Gaby vanhegan wrote: I figured that it would be supported: # bioctl ami0 bioctl: BIOCINQ: Operation not supported by device # bioctl -Dv ami0 bioctl: cookie = 0xd0f51e90 bio_inq bioctl: BIOCINQ: Operation not supported by device Apparently not :( Here's a full

Re: bioctl Device Support

2005-11-23 Thread Marco Peereboom
Otto is right. This looks like a PERC 3/SC. Since the passthrough works everything else should work too. The firmware looks a little old so you might want to upgrade that as well. Send a bioctl ami0 please. On Nov 23, 2005, at 2:00 PM, Otto Moerbeek wrote: On Wed, 23 Nov 2005, Gaby

Re: bioctl Device Support

2005-11-23 Thread Otto Moerbeek
On Wed, 23 Nov 2005, Gaby vanhegan wrote: On 23 Nov 2005, at 20:10, Gaby vanhegan wrote: I figured that it would be supported: # bioctl ami0 bioctl: BIOCINQ: Operation not supported by device # bioctl -Dv ami0 bioctl: cookie = 0xd0f51e90 bio_inq bioctl: BIOCINQ: Operation not

Re: bioctl Device Support

2005-11-23 Thread Marco Peereboom
Ah ok so this is a PERC 2/SC. There is a bug in the driver or firmware which causes the firmware to hang whenever there is access to more than 1 LD at the same time. To prevent hangs I marked these cards as broken to prevent access to more than 1 LD, unfortunately the broken flag also

Re: bioctl Device Support

2005-11-23 Thread Gaby vanhegan
On 23 Nov 2005, at 20:34, Otto Moerbeek wrote: Don't know how you upgraded, but one thing that might be wrong is de bio dev entry: [EMAIL PROTECTED]:35]$ ls -l /dev/bio* crw--- 1 root wheel 79, 0 Jul 7 20:34 /dev/bio [EMAIL PROTECTED]:36]$ I followed all the instructions in the