getting NetMos Nm9835 addon adapter to work gaining two more serial ports
Hi! I am having hard time getting NetMos Nm9835 addon PCI adapter going for gaining two more com ports. OpenBSD 5.2-current of Nov 13 says on commodity i386 hardware # dmesg ... puc0 at pci0 dev 8 function 0 NetMos Nm9835 rev 0x01: ports: 2 com, 1 lpt com3 at puc0 port 0 irq 10: ns16550a, 16 byte fifo com4 at puc0 port 1 irq 10: ns16550a, 16 byte fifo lpt3 at puc0 port 2 irq 10 and /etc/ttys has # cat /etc/ttys ... tty03 /usr/libexec/getty std.9600 vt200 off secure tty04 /usr/libexec/getty std.9600 vt200 off secure Issuing usual cu gives # cu -l /dev/cua03 -s 9600 Connected and stays here # cu -l /dev/cua03 -s 9600 Connected and stays here I would be thankful if somebody comments whether i am doing wrong something obious or this particular device isnt supposed to work on OpenBSD although man puc kind of says it should. (Actually haven't tried this particular piece on anything else yet). Or some advice how to debug it to get some meaningful information to make it possible to help me further. (And i also tried to serve serial console from this computer on cua03 and cua04, no luck). Best regards, Imre PS This computer has two onboard com ports and they work both ways, i.e. as serial consoles and as means to get connected to serial consoles elsewhere. So cable should be good (so to say factory null modem cable). OpenBSD 5.2-current (GENERIC) #82: Tue Nov 13 13:09:22 MST 2012 dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: AMD Duron(tm) Processor (AuthenticAMD 686-class, 64KB L2 cache) 698 MHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,MMXX,3DNOW2,3DNOW real mem = 2146955264 (2047MB) avail mem = 2100928512 (2003MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 10/06/00, BIOS32 rev. 0 @ 0xfb350, SMBIOS rev. 2.3 @ 0xf0800 (38 entries) bios0: vendor Award Software International, Inc. version 6.00 PG date 10/06/2000 bios0: VIA Technologies, Inc. VT8363 apm0 at bios0: Power Management spec V1.2 (slowidle) acpi at bios0 function 0x0 not configured pcibios0 at bios0: rev 2.1 @ 0xf/0xb7d0 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdd00/176 (9 entries) pcibios0: PCI Exclusive IRQs: 5 10 pcibios0: PCI Interrupt Router at 000:07:0 (VIA VT82C596A ISA rev 0x00) pcibios0: PCI bus #1 is the last bus bios0: ROM list: 0xc/0x1 0xd/0x1000 0xd1000/0x1800 cpu0 at mainbus0: (uniprocessor) pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 VIA VT8363 Host rev 0x03 viaagp0 at pchb0: v2 agp0 at viaagp0: aperture at 0xd000, size 0x1000 ppb0 at pci0 dev 1 function 0 VIA VT8363 AGP rev 0x00 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 NVIDIA Vanta rev 0x15 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) pcib0 at pci0 dev 7 function 0 VIA VT82C686 ISA rev 0x22 pciide0 at pci0 dev 7 function 1 VIA VT82C571 IDE rev 0x10: ATA66, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: WDC WD2000JB-32EVA0 wd0: 16-sector PIO, LBA48, 190781MB, 390719855 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: HL-DT-ST, CD-RW GCE-8520B, 1.03 ATAPI 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 uhci0 at pci0 dev 7 function 2 VIA VT83C572 USB rev 0x10: irq 5 uhci1 at pci0 dev 7 function 3 VIA VT83C572 USB rev 0x10: irq 5 viapm0 at pci0 dev 7 function 4 VIA VT82C686 SMBus rev 0x30: SMI iic0 at viapm0 spdmem0 at iic0 addr 0x50: 1GB SDRAM registered ECC PC133CL2 spdmem1 at iic0 addr 0x51: 1GB SDRAM registered ECC PC133CL2 viapm0: 24-bit timer at 3579545Hz auvia0 at pci0 dev 7 function 5 VIA VT82C686 AC97 rev 0x20: irq 10 ac97: codec id 0x83847609 (SigmaTel STAC9721/23) ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D audio0 at auvia0 puc0 at pci0 dev 8 function 0 NetMos Nm9835 rev 0x01: ports: 2 com, 1 lpt com3 at puc0 port 0 irq 10: ns16550a, 16 byte fifo com4 at puc0 port 1 irq 10: ns16550a, 16 byte fifo lpt3 at puc0 port 2 irq 10 em0 at pci0 dev 9 function 0 Intel PRO/1000GT (82541GI) rev 0x05: irq 10, address 00:0e:0c:b0:96:b6 em1 at pci0 dev 10 function 0 Intel PRO/1000MT (82545GM) rev 0x04: irq 10, address 00:04:23:bd:17:d9 fxp0 at pci0 dev 11 function 0 Intel 8255x rev 0x0c, i82550: irq 5, address 00:03:47:9b:76:56 inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4 re0 at pci0 dev 12 function 0 Realtek 8169 rev 0x10: RTL8169/8110SB (0x1000), irq 10, address 00:06:4f:63:e3:d7 rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 3 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo com1: console pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using
Re: getting NetMos Nm9835 addon adapter to work gaining two more serial ports
On Tue, Nov 20, 2012 at 12:33 AM, Imre Oolberg i...@auul.pri.ee wrote: Hi! I am having hard time getting NetMos Nm9835 addon PCI adapter going for gaining two more com ports. OpenBSD 5.2-current of Nov 13 says on commodity i386 hardware # dmesg ... puc0 at pci0 dev 8 function 0 NetMos Nm9835 rev 0x01: ports: 2 com, 1 lpt com3 at puc0 port 0 irq 10: ns16550a, 16 byte fifo com4 at puc0 port 1 irq 10: ns16550a, 16 byte fifo lpt3 at puc0 port 2 irq 10 and /etc/ttys has # cat /etc/ttys ... tty03 /usr/libexec/getty std.9600 vt200 off secure tty04 /usr/libexec/getty std.9600 vt200 off secure But you need to have on here http://www.openbsd.org/faq/faq7.html#SerCon Issuing usual cu gives # cu -l /dev/cua03 -s 9600 Connected and stays here # cu -l /dev/cua03 -s 9600 Connected and stays here I would be thankful if somebody comments whether i am doing wrong something obious or this particular device isnt supposed to work on OpenBSD although man puc kind of says it should. (Actually haven't tried this particular piece on anything else yet). Or some advice how to debug it to get some meaningful information to make it possible to help me further. (And i also tried to serve serial console from this computer on cua03 and cua04, no luck). Best regards, Imre PS This computer has two onboard com ports and they work both ways, i.e. as serial consoles and as means to get connected to serial consoles elsewhere. So cable should be good (so to say factory null modem cable). OpenBSD 5.2-current (GENERIC) #82: Tue Nov 13 13:09:22 MST 2012 dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: AMD Duron(tm) Processor (AuthenticAMD 686-class, 64KB L2 cache) 698 MHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,MMXX,3DNOW2,3DNOW real mem = 2146955264 (2047MB) avail mem = 2100928512 (2003MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 10/06/00, BIOS32 rev. 0 @ 0xfb350, SMBIOS rev. 2.3 @ 0xf0800 (38 entries) bios0: vendor Award Software International, Inc. version 6.00 PG date 10/06/2000 bios0: VIA Technologies, Inc. VT8363 apm0 at bios0: Power Management spec V1.2 (slowidle) acpi at bios0 function 0x0 not configured pcibios0 at bios0: rev 2.1 @ 0xf/0xb7d0 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdd00/176 (9 entries) pcibios0: PCI Exclusive IRQs: 5 10 pcibios0: PCI Interrupt Router at 000:07:0 (VIA VT82C596A ISA rev 0x00) pcibios0: PCI bus #1 is the last bus bios0: ROM list: 0xc/0x1 0xd/0x1000 0xd1000/0x1800 cpu0 at mainbus0: (uniprocessor) pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 VIA VT8363 Host rev 0x03 viaagp0 at pchb0: v2 agp0 at viaagp0: aperture at 0xd000, size 0x1000 ppb0 at pci0 dev 1 function 0 VIA VT8363 AGP rev 0x00 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 NVIDIA Vanta rev 0x15 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) pcib0 at pci0 dev 7 function 0 VIA VT82C686 ISA rev 0x22 pciide0 at pci0 dev 7 function 1 VIA VT82C571 IDE rev 0x10: ATA66, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: WDC WD2000JB-32EVA0 wd0: 16-sector PIO, LBA48, 190781MB, 390719855 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: HL-DT-ST, CD-RW GCE-8520B, 1.03 ATAPI 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 uhci0 at pci0 dev 7 function 2 VIA VT83C572 USB rev 0x10: irq 5 uhci1 at pci0 dev 7 function 3 VIA VT83C572 USB rev 0x10: irq 5 viapm0 at pci0 dev 7 function 4 VIA VT82C686 SMBus rev 0x30: SMI iic0 at viapm0 spdmem0 at iic0 addr 0x50: 1GB SDRAM registered ECC PC133CL2 spdmem1 at iic0 addr 0x51: 1GB SDRAM registered ECC PC133CL2 viapm0: 24-bit timer at 3579545Hz auvia0 at pci0 dev 7 function 5 VIA VT82C686 AC97 rev 0x20: irq 10 ac97: codec id 0x83847609 (SigmaTel STAC9721/23) ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D audio0 at auvia0 puc0 at pci0 dev 8 function 0 NetMos Nm9835 rev 0x01: ports: 2 com, 1 lpt com3 at puc0 port 0 irq 10: ns16550a, 16 byte fifo com4 at puc0 port 1 irq 10: ns16550a, 16 byte fifo lpt3 at puc0 port 2 irq 10 em0 at pci0 dev 9 function 0 Intel PRO/1000GT (82541GI) rev 0x05: irq 10, address 00:0e:0c:b0:96:b6 em1 at pci0 dev 10 function 0 Intel PRO/1000MT (82545GM) rev 0x04: irq 10, address 00:04:23:bd:17:d9 fxp0 at pci0 dev 11 function 0 Intel 8255x rev 0x0c, i82550: irq 5, address 00:03:47:9b:76:56 inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4 re0 at pci0 dev 12 function 0 Realtek 8169 rev 0x10: RTL8169/8110SB (0x1000), irq 10, address 00:06:4f:63:e3:d7 rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 3 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4:
