Claudio Jeker writes:
> Yeah, the documentation is not great.
>
> You need to add 'net' to the mount options in /etc/fstab for iscsi drives.
> Then our rc script will do the right thing and mount these drives late
> (after iscsid started).
>
> .a /mnt/test ffs
On Fri, Feb 19, 2021 at 07:48:25PM -0500, Ashton Fagg wrote:
> I'm curious as to what other folks are doing for mounting iSCSI volumes
> at boot time. I've successfully configured iscsid, and mounting the
> volume manually works as expected.
>
> I found this articl
I'm curious as to what other folks are doing for mounting iSCSI volumes
at boot time. I've successfully configured iscsid, and mounting the
volume manually works as expected.
I found this article [1] which suggests that hotplugd should be used.
I also found this old presentation
This is some kind of BIOS boot-up support
The chips on this board are run-of-the-mill em
OpenBSD 4.9-current (GENERIC.MP) #32: Sat Apr 23 18:16:16 PDT 2011
ch...@celery.ykwc.com:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8580038656 (8182MB)
avail mem = 8337596416 (7951MB)
mainbus0
Hello.
Does anybody know about iSCSI BIOS settings in recent Supermicro boards?
For example, manual for X8SIL family says:
1-7 iSCSI Support
The X8SIL/X8SIL-F/X8SIL-V motherboard supports the iSCSI Internet
Protocol. iSCSI
is an IP networking standard used to link and manage data storage, and
hello,
i would encourage people to consider sending donations in for this, i think it
would be an extremely good investment. claudio already has a good start on an
implementation of an iscsi initiator, but he's at the point where he needs
real gear to work and test against. given the gear i
On 30/01/2010, at 10:34 PM, Claudio Jeker wrote:
> On Tue, Jan 19, 2010 at 08:08:51PM +1000, David Gwynne wrote:
>> On 19/01/2010, at 7:04 PM, Michael Lechtermann wrote:
>>
>>> Hi,
>>>
>>> Is it already possible to mount iSCSI devices with OpenBSD(-c
On Tue, Jan 19, 2010 at 08:08:51PM +1000, David Gwynne wrote:
> On 19/01/2010, at 7:04 PM, Michael Lechtermann wrote:
>
> > Hi,
> >
> > Is it already possible to mount iSCSI devices with OpenBSD(-current)?
>
> no.
>
You're such a pessimist, dlg.
--
:wq Claudio
On 19/01/2010, at 7:04 PM, Michael Lechtermann wrote:
> Hi,
>
> Is it already possible to mount iSCSI devices with OpenBSD(-current)?
no.
Hi,
Is it already possible to mount iSCSI devices with OpenBSD(-current)?
Michael
Aaron Mason wrote:
On Wed, Dec 2, 2009 at 8:44 AM, Robert wrote:
On Tue, 01 Dec 2009 19:30:27 +0100
carlopmart wrote:
Hi all,
I am trying to find some info to boot an openbsd from a SAN
(iSCSI). Is it possible with the latest openbsd release?
Thanks.
No.
- Robert
It would be
On Wed, Dec 2, 2009 at 8:44 AM, Robert wrote:
> On Tue, 01 Dec 2009 19:30:27 +0100
> carlopmart wrote:
>
>> Hi all,
>>
>> I am trying to find some info to boot an openbsd from a SAN
>> (iSCSI). Is it possible with the latest openbsd release?
>>
>>
On Tue, 01 Dec 2009 19:30:27 +0100
carlopmart wrote:
> Hi all,
>
> I am trying to find some info to boot an openbsd from a SAN
> (iSCSI). Is it possible with the latest openbsd release?
>
> Thanks.
>
No.
- Robert
Hi all,
I am trying to find some info to boot an openbsd from a SAN (iSCSI). Is it
possible with the latest openbsd release?
Thanks.
--
CL Martinez
carlopmart {at} gmail {d0t} com
On Thu, 11 Jun 2009 14:03:43 -0300, Friedrich Locke wrote
> Hello,.
>
> i am in need to setup a box to works as a iSCSI target. My operating
> system of choice is OpenBSD.
> I found netbsd iSCSI and would like to install it on OpenBSD.
>
> Does anybody already implemented it
Hello,.
i am in need to setup a box to works as a iSCSI target. My operating
system of choice is OpenBSD.
I found netbsd iSCSI and would like to install it on OpenBSD.
Does anybody already implemented it on OpenBSD? Is there any thing i
should be aware about it?
Thanks in advance.
Best Regards
Internet access.
>
> I need to grant access from dmz servers to iscsi storage servers located on
> internal lan. Which can be the best form to accomplish this??
Depends on how you define 'best' ;)
> a) Connect DMZ servers directly to iscsi servers using another private la
Hi all,
Sorry for the off-topic but I need some help with a specific implemantation. I
have two OpenBSD firewalls with 4 interfaces each one: one for internal lan, one
for sync lan, one for dmz lan and another for Internet access.
I need to grant access from dmz servers to iscsi storage
id
>> however that is further out.
>>
>> *sigh* so much code so little time...
>
> So the information under
>
> http://en.wikipedia.org/wiki/ISCSI#Operating-system_support
>
> about OpenBSD supporting iSCSI is nonsense?
>
>>
>> On Sun, Jul 06, 2008 at 0
On 8/8/08, Heinrich Rebehn <[EMAIL PROTECTED]> wrote:
> So the information under
>
> http://en.wikipedia.org/wiki/ISCSI#Operating-system_support
>
> about OpenBSD supporting iSCSI is nonsense?
The information under http://en.wikipedia.org/wiki/ is nonsense.
/wiki/ISCSI#Operating-system_support
about OpenBSD supporting iSCSI is nonsense?
On Sun, Jul 06, 2008 at 07:43:09PM +0200, Denis Fondras wrote:
Hello,
I'm doing some testing with iSCSI and I'd like to know if there is any plan
to add iSCSI support to OpenBSD (initiator and/or target)
What part isn't clear?
On Mon, Jul 07, 2008 at 08:18:51PM +0200, Denis Fondras wrote:
>> Eventually.
>>
>> I started writing the qli driver but have not had time to finish that.
>>
>> I also am planning to do a software initiator/target using softraid
>> however that is further out.
>>
>> *sigh* s
Eventually.
I started writing the qli driver but have not had time to finish that.
I also am planning to do a software initiator/target using softraid
however that is further out.
*sigh* so much code so little time...
Thank you for the answer.
Could you share what you've done please ?
Deni
llo,
>
> I'm doing some testing with iSCSI and I'd like to know if there is any plan
> to add iSCSI support to OpenBSD (initiator and/or target) ?
>
> Denis
Hello,
I'm doing some testing with iSCSI and I'd like to know if there is any
plan to add iSCSI support to OpenBSD (initiator and/or target) ?
Denis
> A quick Google search shows some people having success in porting NetBSD's
> iSCSI to OpenBSD.
>
>perhaps Marco will chime in on this.
>
>diana
If testers for an iSCSI initiator on OpenBSD should be needed, I am
glad to help out. I run i386.mp-current and sparc64-curr
On 10/18/07, Diana Eichert <[EMAIL PROTECTED]> wrote:
> On Thu, 18 Oct 2007, Steve Shockley wrote:
>
> > mickey wrote:
> >> On Thu, Oct 18, 2007 at 04:13:35PM +0200, Artur Litwinowicz wrote:
> >>>quick question: how can I connect OpenBSD box to iSCSI s
On Thu, 18 Oct 2007, Steve Shockley wrote:
mickey wrote:
On Thu, Oct 18, 2007 at 04:13:35PM +0200, Artur Litwinowicz wrote:
quick question: how can I connect OpenBSD box to iSCSI storage ?
by means of an iSCSI cable?
While that's true, I'm guessing he already has an Ethe
mickey wrote:
On Thu, Oct 18, 2007 at 04:13:35PM +0200, Artur Litwinowicz wrote:
quick question: how can I connect OpenBSD box to iSCSI storage ?
by means of an iSCSI cable?
While that's true, I'm guessing he already has an Ethernet cable...
A quick Google search shows s
On Thu, Oct 18, 2007 at 04:13:35PM +0200, Artur Litwinowicz wrote:
> Hi :),
>quick question: how can I connect OpenBSD box to iSCSI storage ?
by means of an iSCSI cable?
cu
--
paranoic mickey (my employers have changed but, the name has remained)
Hi :),
quick question: how can I connect OpenBSD box to iSCSI storage ?
Best regards,
Artur
Hi, I'd like to know if OpenBSD dev team is interested or is planning
to include iSCSI support in source tree. I know that NetBSD has
recently implemented a Target iSCSI support (not Initiator), but
NetBSD is not OpenBSD... Thanks
Fulvio
quote from http://www.netbsd.org/Changes/#iscsi-target
22 Feb 2006 - NetBSD iSCSI Status and HOWTOs (top)
Alistair G. Crooks has recently added support for an iSCSI target
to NetBSD, and written HOWTOs for using it. iSCSI is specified in
RFC 3720 and describes a method for encapsulating SCSI
Kenneth R Westerback wrote:
Nobody is working on iSCSI as far as I know, and I'm one of the scsi
developers at OpenBSD. Now if someone was to donate enough equipment
that someone could work on it, things might change.
Ken
Adaptec do a iscsi HBA, would you some more Adaptec kit?
34 matches
Mail list logo
