If you're really *that* worried you should build everything you use from
source after trawling through the source.
Personally I'd be much more concerned about all the other components on
your internet connection from router to ISP.
Then of course there's your mobile phone...
On May 9,
On Thu, May 10, 2012 at 2:34 AM, Brett brett.ma...@gmx.com wrote:
I would like to hear your arguments on this and if there is a simple way to
disable fw_update and uninstall in general everything propietary
affecting the network card that I have not been warned about.
If you're using a PC you
On 2012-05-10, Predrag Punosevac punoseva...@gmail.com wrote:
I would like to hear opinion about:
Dell PowerEdge R210 II Ultra-compact Rack Server
These work fine, quite nice machines.
I am looking at the one with
Intel Gigabit ET Quad Port Adapter, Gigabit Ethernet NIC, PCIe x4
I think
Hi,
I have a few OpenBSD boxes, including two firewalls at my house that I
just upgraded to 5.1.
Unfortunately post-upgrade I seem to have triggered some unusual
condition with them where they go completely unresponsive
(network/console don't respond at all). Keyboard lights do continue to
On 10.5.2012 3:28, Predrag Punosevac wrote:
Dear All,
I am resurrecting this thread which I followed carefully because I need
some hardware advice for the firewall machine which is going to serve
our new scientific computing laboratory. Initially behind this firewall,
we will have only two
Please see
http://www.openbsd.org/faq/faq2.html
and
http://www.openbsd.org/report.html
Regards.
--
JC)rC)mie CourrC(ges-Anglas
GPG fingerprint: 61DB D9A0 00A4 67CF 2A90 8961 6191 8FBF 06A1 1494
On Tue, May 08, 2012 at 07:58:30PM -0400, Simon Perreault wrote:
On 2012-05-08 19:08, Per-Olov Sjvholm wrote:
It says em1: watchdog timeout -- resetting
aol
I saw the same on an amd64 VPS from arpnetworks.com. Network was not
functional. Backed out. Did not investigate further.
/aol
Hello,
From man pf.conf:
Options returning ICMP packets currently have no effect if pf(4)
operates on a bridge(4), as the code to support this feature has
not yet been implemented.
Just wondering, will this be implemented?
If I understand correctly, if block return is set on a bridging
On 05/10/2012 09:14 AM, Garry Dolley wrote:
On Tue, May 08, 2012 at 07:58:30PM -0400, Simon Perreault wrote:
On 2012-05-08 19:08, Per-Olov Sjvholm wrote:
It says em1: watchdog timeout -- resetting
aol
I saw the same on an amd64 VPS from arpnetworks.com. Network was not
functional. Backed
On Thu, 10 May 2012 00:46:05 +0200
Alexander Hall wrote:
revision 1.654
date: 2011/11/08 19:55:52; author: deraadt; state: Exp; lines: +2 -6
Now that the code is well tested, don't ask the firmware question
anymore. Saves 141 precious bytes on the inside of the media.
ok krw
I bet he
I used iRedMail . Good work. Thanks.
On Thu, May 10, 2012 at 3:34 PM, Zhang Huangbin
zhbmaillisto...@gmail.comwrote:
Dear list,
I'd like to introduce iRedMail[1] to you, a free, open source mail
server solution
for OpenBSD and other Linux/BSD distributions: http://www.iredmail.org/
Resimleri gvremiyor musunuz? Resimleri gvsteri segin ya da bu iletiyi
tarayD1cD1nD1zda gvr|nt|leyin.
Bilgilendirme e-postalarD1nD1 almak istemiyorsanD1z l|tfen tD1klayD1n.
[IMAGE]
0212 252 15 75
[IMAGE]
KullanmadD1D D1nD1z arD1zalD1 veya galD1E D1r durumdaki
bilgisayarlarD1nD1z bizim igin deD
If you have concerns with firmwares, swap your card with, for example, an
atheros or another card that doesn't need a firmware.
Some atheros does use firmware, eg athn(4).
Not all the athns. Only USB ones, like the AR9271, need a firmware.
Mine is an Atheros (athn, I don't know the model now
Wed, 9 May 2012 09:20:44 -0600 PQ Alvaro Mantilla Gimenez
alv...@alvaromantilla.com:
According these guys connect trough SSH to a remote server is not secure...
http://www.wziss.com/
Look in Case Studies
What a disgusting way of promoting one's product!
Content of Case Studies is
On Thu, May 10, 2012 at 12:03 PM, mark sullivan mark.sulli...@gmx.fr wrote:
I didn't even have the chance to test if it would work without it.
Yes, it should work.
Just remove the package with pkg_delete athn-firmware.
On Thu, May 10, 2012 at 1:18 PM, mxb m...@alumni.chalmers.se wrote:
On 05/10/2012 09:14 AM, Garry Dolley wrote:
On Tue, May 08, 2012 at 07:58:30PM -0400, Simon Perreault wrote:
On 2012-05-08 19:08, Per-Olov Sjvholm wrote:
It says em1: watchdog timeout -- resetting
aol
I saw the same on an
On Thu, 10 May 2012 12:49:09 +0400
Mo Libden wrote:
You can make it as secure as you want, then
there is also the wrench solution:
I used to work somewhere with a steel door. Downstairs made copper
wire. There was some building work going on across the road. One
morning there was a whole in
On 10 maj 2012, at 19:18, mxb wrote:
On 05/10/2012 09:14 AM, Garry Dolley wrote:
On Tue, May 08, 2012 at 07:58:30PM -0400, Simon Perreault wrote:
On 2012-05-08 19:08, Per-Olov Sjvholm wrote:
It says em1: watchdog timeout -- resetting
aol
I saw the same on an amd64 VPS from
My advice is to not use a computer at all.
Stick to pen and paper.
P.S. You are a fucking stupid fucking moron.
I would suggest that you fashion a hat
out of aluminum foil and wear it firmly
on your head. This way you will stop
wasting the time of rational people.
On Thu, May
Also, while I recognize this is an edge case, I have in the past sold
systems with OpenBSD installed on them to other people, and now that I
come to think of it I have no idea whether that's legal to do with, say,
iwn-firmware installed on it (it's probably not).
Every firmware package includes a
On Wed, May 09, 2012 at 05:59:55PM +, Miod Vallat wrote:
It's only as secure as the local and/or remote machine.
There's nothing SSH can do about that
I have a bucket of water. Can anyone tell me why my hand gets wet if I
put it inside the bucket.
That's because you need
In gmane.os.openbsd.misc, Garry Dolley wrote:
On Tue, May 08, 2012 at 07:58:30PM -0400, Simon Perreault wrote:
On 2012-05-08 19:08, Per-Olov Sjvholm wrote:
It says em1: watchdog timeout -- resetting
aol
I saw the same on an amd64 VPS from arpnetworks.com. Network was not
functional. Backed
!Muy Importante!
Si no puede visualizar correctamente este correo, le pedimos que lo arrastre a
su Bandeja de Entrada
Apreciable Ejecutivo:
Debido al exito obtenido ponemos a su disposicisn una nueva fecha para el
curso de:
Administracisn y Optimizacisn del Tiempo
Esta Programado para el dma:
On 05/10/12 04:24, JC)rC)mie CourrC(ges-Anglas wrote:
Please see
http://www.openbsd.org/faq/faq2.html
and
http://www.openbsd.org/report.html
Regards.
Hi,
Thanks for that.
So i'm basically looking for ps/registers since I don't have any panic
message? I was able to get that far, but it
I want to setup sendmail so that I can send mail from my home network.
I have no experience with sendmail outside a corporate environment where
DNS makes everything happen automagically.
I have a Gmail account. Is sending via Gmail possible or sensible?
Any advice would be appreciated.
Hey, newbie here,
I had major freezes very early in the CD install process (kbd dead, no log, PC
has no serial) because of mistaken softraid detection. It happened on
exceptionally crappy hardware: a Dell Vostro 200 w/ Intel rapid storage RAID,
i.e. latest BIOS is still old. BIOS UI has only
On Thu, May 10, 2012 at 10:34:14AM +1000, Brett wrote:
Easiest way to disable the uvideo firmware (and any bios video spyware) is to
stick black electrical tape over the webcam lens.
When I was a kid, one of the science experiments we did was to use a
speaker as a microphone.
Electrical
Laurence Rochfort laurence.rochf...@gmail.com writes:
I want to setup sendmail so that I can send mail from my home network.
Shouldn't be too hard, but make sure you get your mail server machine a
static IP address *and* a correct DNS entry, complete with reverse
resolution. Largish chunks of
You can easily send receive using gmail, either with a gmail account or
with google apps and your domain at home, though neither of these likely
involve your own sendmail setup. If you want your own mailserver, you need
port 25 to be allowed both ways and a static IP (more proper) or dynamic
dns
On Wed, May 9, 2012 at 3:33 PM, mark sullivan mark.sulli...@gmx.fr wrote:
I would like to hear your arguments on this and if there is a simple way
to disable fw_update and uninstall in general everything propietary
affecting the network card that I have not been warned about. I read on the
Para visualizar correctamente este newsletter ingresa a
http://news1.bonuscupon.com.ar/r.html?uid=1.d.29hh.5s.kk7kfzmz5e
On Thu, May 10, 2012 at 03:31:27PM +0100, Stuart Henderson wrote:
In gmane.os.openbsd.misc, Garry Dolley wrote:
On Tue, May 08, 2012 at 07:58:30PM -0400, Simon Perreault wrote:
On 2012-05-08 19:08, Per-Olov Sjvholm wrote:
It says em1: watchdog timeout -- resetting
aol
I saw the same
At 12:30 PM 5/10/2012, you wrote:
I want to setup sendmail so that I can send mail from my home network.
I have no experience with sendmail outside a corporate environment where
DNS makes everything happen automagically.
I have a Gmail account. Is sending via Gmail possible or sensible?
Any
[IMAGE]
Pms de Mixico prestigiada firma de Capacitacisn presenta:
Excelencia Estratigica para el Gerente de Marketing
Znico taller diseqado para Marketing donde de forma integral elabore el
plan de medios adecuado a su empresa
Con Mitricos efectivos.
RESERVE YA!
25 de Mayo, Ciudad de Mixico.
* Siju George sgeorge@gmail.com [2012-05-08 10:54]:
On Fri, May 4, 2012 at 5:39 PM, Stuart Henderson s...@spacehopper.org wrote:
Realtek 8188CE rev 0x01 at pci4 dev 0 function 0 not configured
urtwn(4) is for USB-attached devices, your wlan controller is an
unsupported PCIE device.
Any
* Matt Hamilton ma...@netsight.co.uk [2012-05-04 11:22]:
I know that OSPF can be configured to demote the carp group until it
has at least one active neighbor, but this is too late. The carp
interface is brought up on boot before the ospfd is started.
carp is demoted until rc is finished, and
[IMAGE]
Pms de Mixico prestigiada firma de Capacitacisn presenta:
Licitaciones Pzblicas para PEMEX, CFE y Salud
Un programa diseqado para brindar soluciones contundentes a obstaculos
que se puedan enfrenta en sus procesos de Licitaciones.
28 de Mayo en Mixico D.F. !Reciba la informacisn completa
On Thu, May 10, 2012 at 11:30 AM, Laurence Rochfort
laurence.rochf...@gmail.com wrote:
I want to setup sendmail so that I can send mail from my home network.
I have no experience with sendmail outside a corporate environment where
DNS makes everything happen automagically.
I have a Gmail
On Wed, May 09, 2012 at 02:35:42PM -0300, Christiano F. Haesbaert wrote:
That's because you need to buy AutoBucket.
Made my day.
While I was configuring a new ALIX to my MPLS setup a panic ocurred
while starting LDPd daemon.
Steps:
1. Configure all interfaces using /etc/hostname.*, then run 'sh
/etc/netstart'
2. Configure ospfd.conf, then start it: ospfd -dv
3. Configure ldpd.conf, then start it: ldpd -dv
4. Panic
I'll
On Thu, May 10, 2012 at 8:19 PM, Rafael Zalamena rzalam...@gmail.com wrote:
While I was configuring a new ALIX to my MPLS setup a panic ocurred
while starting LDPd daemon.
Steps:
1. Configure all interfaces using /etc/hostname.*, then run 'sh /etc/netstart'
2. Configure ospfd.conf, then
On Thu, May 10, 2012 at 12:32 AM, Weldon Goree wel...@b.rontosaur.us wrote:
Right... because AutoSFTP and AutoSSH do not allow an administrator to
tamper with *them* at all?
I guess it's because they have Anti-Trojan capabilities so
presumably the binaries will detect if they have been tampered
Were there ever 4.4 m68k packages? I can only find 4.3 packages for m68k on ftp
sites.
Or, is it possible to cross compile for m68k arch on i386? Or if I can't
compile 4.4 packages either cross compile, or on the SE/30 itself, I will
downgrade the SE/30 to 4.3 The Quadra 700 I was using to
On 5/9/2012 12:32 PM, Weldon Goree wrote:
only our AutoSSH and AutoSFTP can detect
truss/tusc/strace and dtrace attack, and detect Trojan Horse attack.
See, now we know why people keep asking for dtrace in OpenBSD, it's to
get our passwords. I knew it was a trap!
On 5/10/12 4:24 AM, JC)rC)mie CourrC(ges-Anglas wrote:
Please see
http://www.openbsd.org/faq/faq2.html
and
http://www.openbsd.org/report.html
Regards.
Hi,
I did do a sendbug, but i'm not sure if gnats@ goes anywhere (seems
query-pr page is broken?).
In any event, this is the ddb
Nevermind, I'll make things easy on myself, and downgrade it to 4.2 - the most
recent with a fairly complete set of m68k packages. :-)
On Fri, May 11, 2012 at 07:57:11AM +1000, David Diggles wrote:
Were there ever 4.4 m68k packages? I can only find 4.3 packages for m68k on
ftp sites.
Or,
色々な最新情報メールを配信しております。
今後、最新情報をお送りさせて頂くにあたり最終確認を行っております。
お手数をお掛け致しますが、今後最新情報メールを
希望されない方はこちらまで「希望しない」とご連絡ください。
47 matches
Mail list logo
