Soekris 4501 and OpenBSd 5.7

2015-09-16 Thread Markus Rosjat
Hi there, just a simple question, is it possible to install a 5.7 on a soekris 4501? It seems when I try to load the bsd.rd ftom the tftp server the soekris isnt able to handle it. I redirected the console but it get stuck on the entry point msg. Regards Markus -- Markus Rosjatfon:

Re: Soekris 4501 and OpenBSd 5.7

2015-09-16 Thread Devin Reade
> On Sep 16, 2015, at 00:40, Markus Rosjat wrote: > > Hi there, > > just a simple question, is it possible to install a 5.7 on a soekris 4501? I don't know about the 4501, but the 5501 works fine. Any chance you grabbed the 64 bit image by mistake? Devin

Re: Soekris 4501 and OpenBSd 5.7

2015-09-16 Thread Nayden Markatchev
4801 worked fine for me until it died (hardware failure) On Wed, Sep 16, 2015 at 8:35 AM, Devin Reade wrote: >> On Sep 16, 2015, at 00:40, Markus Rosjat wrote: >> >> Hi there, >> >> just a simple question, is it possible to install a 5.7 on a soekris 4501? > > I

Re: Soekris 4501 and OpenBSd 5.7

2015-09-16 Thread Adam Jeanguenat
rosjat wrote: > stuck on the entry point msg. You need to create a boot.conf file with a couple of commands. Read this: http://www.openbsd.org/faq/faq6.html#PXE The contents of the file will likely need to be as follows: stty com0 115200 set tty com0 The default baud rate is 9600 --

Re: Soekris 4501 and OpenBSd 5.7

2015-09-16 Thread Christian Weisgerber
On 2015-09-16, Devin Reade wrote: > I don't know about the 4501, but the 5501 works fine. Also, lunch was okay. Since we are talking about totally different things. -- Christian "naddy" Weisgerber na...@mips.inka.de

Re: Soekris 4501 and OpenBSd 5.7

2015-09-16 Thread Stuart Henderson
On 2015-09-16, Adam Jeanguenat wrote: > rosjat wrote: >> stuck on the entry point msg. > > You need to create a boot.conf file with a couple of commands. Read > this: > >http://www.openbsd.org/faq/faq6.html#PXE > > The contents of the file will likely need to be as follows: >

Re: Soekris 4501 and OpenBSd 5.7

2015-09-16 Thread Markus Rosjat
yeah basically :-P but the hint with the version of the image seems to be the right thing to check. I had the image laying arround since earlier this yeah when I set up a 6501 so this should be a 64bit image and if I remember right 4501 is only capable of 32bit. So I'll give it a try with a