Re: update to docs/faq for partition sizes ?
howdee, wellp - it took 36-ish hours, but after swapping my /xtra and /usr/obj partitions the following seems to be the "answer" for my single-data point... fw$ df -h Filesystem SizeUsed Avail Capacity Mounted on /dev/sd0a 986M121M816M13%/ /dev/sd0k 18.8G1.5G 16.3G 8%/home /dev/sd0d 3.9G 11.2M3.7G 0%/tmp /dev/sd0f 5.8G2.8G2.7G51%/usr /dev/sd0g 986M236M701M25%/usr/X11R6 /dev/sd0h 15.7G286K 14.9G 0%/usr/local /dev/sd0n 27.1G 11.9G 13.9G46%/usr/obj /dev/sd0i 1.9G1.3G592M68%/usr/src /dev/sd0e 11.6G8.8M 11.0G 0%/var /dev/sd0l 1.9G380K1.8G 0%/var/log /dev/sd0m 9.7G1.3M9.2G 0%/var/www /dev/sd0j 5.8G4.9G636M89%/xtra ie - you'd need 12gb for the /usr/obj directory for full-base-with-debug... (or increase by a factor of 3, the default amounts - ish...) in case it is useful for anyone else - fyi... have fun, h. On Mon, Feb 15, 2021 at 4:07 AM harold felton wrote: > Got it. > If i sort out the answer (since i noticed a spare xtra-partition i had > made) > i will go ahead and followup... > thx, h. > > On Mon, Feb 15, 2021 at 3:28 AM Otto Moerbeek wrote: > >> On Mon, Feb 15, 2021 at 01:57:23AM -0800, harold felton wrote: >> >> > howdee, >> > >> > this is totally not critical, but i will go ahead and ask: >> > >> > assuming that i have added the following to /etc/mk.conf... >> > DEBUG=-g >> > KEEPKERNELS=yes >> > SUDO=doas >> > WARNINGS=-Wall >> > >> > how big do i need the /usr/obj partition to be ? >> >> DEBUG=-g makes things way bigger. KEEPKERNELS is also leaving more >> cruft afaik. >> >> You are not compiling with standard options, so how should we know? >> >> -Otto >> > >> > i do not remember specifically adjusting the /usr/xxx partitions >> > when i was initially installing this system - but i clearly changed >> > something... >> > because the answer for 'df -h' is as follows: >> > Filesystem SizeUsed Avail Capacity Mounted on >> > /dev/sd0a 986M121M816M13%/ >> > /dev/sd0k 18.8G1.5G 16.3G 8%/home >> > /dev/sd0d 3.9G 10.0K3.7G 0%/tmp >> > /dev/sd0f 5.8G2.8G2.7G51%/usr >> > /dev/sd0g 986M236M701M25%/usr/X11R6 >> > /dev/sd0h 15.7G286K 14.9G 0%/usr/local >> > /dev/sd0j 5.8G4.9G636M89%/usr/obj >> > /dev/sd0i 1.9G1.2G618M67%/usr/src >> > /dev/sd0e 11.6G8.8M 11.0G 0%/var >> > /dev/sd0l 1.9G344K1.8G 0%/var/log >> > /dev/sd0m 9.7G1.3M9.2G 0%/var/www >> > /dev/sd0n 27.1G2.0K 25.8G 0%/xtra >> > >> > i will include the dmesg below, altho i doubt it is critical other than >> > to note that the size of my sd0 is 120Gb... >> > >> [snip] > >
Re: update to docs/faq for partition sizes ?
Got it. If i sort out the answer (since i noticed a spare xtra-partition i had made) i will go ahead and followup... thx, h. On Mon, Feb 15, 2021 at 3:28 AM Otto Moerbeek wrote: > On Mon, Feb 15, 2021 at 01:57:23AM -0800, harold felton wrote: > > > howdee, > > > > this is totally not critical, but i will go ahead and ask: > > > > assuming that i have added the following to /etc/mk.conf... > > DEBUG=-g > > KEEPKERNELS=yes > > SUDO=doas > > WARNINGS=-Wall > > > > how big do i need the /usr/obj partition to be ? > > DEBUG=-g makes things way bigger. KEEPKERNELS is also leaving more > cruft afaik. > > You are not compiling with standard options, so how should we know? > > -Otto > > > > i do not remember specifically adjusting the /usr/xxx partitions > > when i was initially installing this system - but i clearly changed > > something... > > because the answer for 'df -h' is as follows: > > Filesystem SizeUsed Avail Capacity Mounted on > > /dev/sd0a 986M121M816M13%/ > > /dev/sd0k 18.8G1.5G 16.3G 8%/home > > /dev/sd0d 3.9G 10.0K3.7G 0%/tmp > > /dev/sd0f 5.8G2.8G2.7G51%/usr > > /dev/sd0g 986M236M701M25%/usr/X11R6 > > /dev/sd0h 15.7G286K 14.9G 0%/usr/local > > /dev/sd0j 5.8G4.9G636M89%/usr/obj > > /dev/sd0i 1.9G1.2G618M67%/usr/src > > /dev/sd0e 11.6G8.8M 11.0G 0%/var > > /dev/sd0l 1.9G344K1.8G 0%/var/log > > /dev/sd0m 9.7G1.3M9.2G 0%/var/www > > /dev/sd0n 27.1G2.0K 25.8G 0%/xtra > > > > i will include the dmesg below, altho i doubt it is critical other than > > to note that the size of my sd0 is 120Gb... > > > > i was also going to ask about a bunch of warnings that i saw scroll by > > "dwarf2 only supports one compilation unit" or something... > > i didnt think that these warning were important since i noticed that > freebsd > > had already dealt with them around 2016-2018 when compiling golang... > > (see: https://github.com/golang/go/issues/14705) > > > > anyways - i was going to try and learn how to use the debugger, etc... > > and thought it would be useful to have all the symbols and code > available... > > i got thru the https://man.openbsd.org/release step-2 and was trying to > > do the 'make build' of base when i ran-out-of-space... > > > > i have a feeling that i would have been fine only compiling non-debug, > > but figured this question might be an faq-type answer that i could ask... > > > > ok - heres my current dmesg (was running -current from a few days back > > until i had just-compiled the -current system i ran out of space on) > > > > fyi - this is a pcengines apu4d4 - if that helps... > > tia, h. > > > > > > > > OpenBSD 6.9-beta (GENERIC.MP) #0: Sat Feb 13 09:41:26 PST 2021 > > hfeltonad...@fw.hfelton.net:/sys/arch/amd64/compile/GENERIC.MP > > real mem = 4259868672 (4062MB) > > avail mem = 4115427328 (3924MB) > > random: good seed from bootblocks > > mpath0 at root > > scsibus0 at mpath0: 256 targets > > mainbus0 at root > > bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xcfe8a040 (13 entries) > > bios0: vendor coreboot version "v4.12.0.6" date 10/29/2020 > > bios0: PC Engines apu4 > > acpi0 at bios0: ACPI 6.0 > > acpi0: sleep states S0 S1 S4 S5 > > acpi0: tables DSDT FACP SSDT MCFG TPM2 APIC HEST SSDT SSDT DRTM HPET > > acpi0: wakeup devices PBR4(S4) PBR5(S4) PBR6(S4) PBR7(S4) PBR8(S4) > UOH1(S3) > > UOH2(S3) UOH3(S3) UOH4(S3) UOH5(S3) UOH6(S3) XHC0(S4) > > acpitimer0 at acpi0: 3579545 Hz, 32 bits > > acpimcfg0 at acpi0 > > acpimcfg0: addr 0xf800, bus 0-64 > > acpimadt0 at acpi0 addr 0xfee0: PC-AT compat > > cpu0 at mainbus0: apid 0 (boot processor) > > cpu0: AMD GX-412TC SOC, 998.29 MHz, 16-30-01 > > cpu0: > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT > > cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB > > 64b/line 16-way L2 cache > > cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully > associative > > cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully > associative > > cpu0: smt 0, core 0, package 0 > > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > > cpu0: apic clock running at 99MHz > > cpu0: mwait min=64, max=64, IBE > > cpu1 at mainbus0: apid 1 (application processor) > > cpu1: AMD GX-412TC SOC, 998.13 MHz, 16-30-01 > > cpu1: > > >
Re: update to docs/faq for partition sizes ?
On Mon, Feb 15, 2021 at 01:57:23AM -0800, harold felton wrote: > howdee, > > this is totally not critical, but i will go ahead and ask: > > assuming that i have added the following to /etc/mk.conf... > DEBUG=-g > KEEPKERNELS=yes > SUDO=doas > WARNINGS=-Wall > > how big do i need the /usr/obj partition to be ? DEBUG=-g makes things way bigger. KEEPKERNELS is also leaving more cruft afaik. You are not compiling with standard options, so how should we know? -Otto > > i do not remember specifically adjusting the /usr/xxx partitions > when i was initially installing this system - but i clearly changed > something... > because the answer for 'df -h' is as follows: > Filesystem SizeUsed Avail Capacity Mounted on > /dev/sd0a 986M121M816M13%/ > /dev/sd0k 18.8G1.5G 16.3G 8%/home > /dev/sd0d 3.9G 10.0K3.7G 0%/tmp > /dev/sd0f 5.8G2.8G2.7G51%/usr > /dev/sd0g 986M236M701M25%/usr/X11R6 > /dev/sd0h 15.7G286K 14.9G 0%/usr/local > /dev/sd0j 5.8G4.9G636M89%/usr/obj > /dev/sd0i 1.9G1.2G618M67%/usr/src > /dev/sd0e 11.6G8.8M 11.0G 0%/var > /dev/sd0l 1.9G344K1.8G 0%/var/log > /dev/sd0m 9.7G1.3M9.2G 0%/var/www > /dev/sd0n 27.1G2.0K 25.8G 0%/xtra > > i will include the dmesg below, altho i doubt it is critical other than > to note that the size of my sd0 is 120Gb... > > i was also going to ask about a bunch of warnings that i saw scroll by > "dwarf2 only supports one compilation unit" or something... > i didnt think that these warning were important since i noticed that freebsd > had already dealt with them around 2016-2018 when compiling golang... > (see: https://github.com/golang/go/issues/14705) > > anyways - i was going to try and learn how to use the debugger, etc... > and thought it would be useful to have all the symbols and code available... > i got thru the https://man.openbsd.org/release step-2 and was trying to > do the 'make build' of base when i ran-out-of-space... > > i have a feeling that i would have been fine only compiling non-debug, > but figured this question might be an faq-type answer that i could ask... > > ok - heres my current dmesg (was running -current from a few days back > until i had just-compiled the -current system i ran out of space on) > > fyi - this is a pcengines apu4d4 - if that helps... > tia, h. > > > > OpenBSD 6.9-beta (GENERIC.MP) #0: Sat Feb 13 09:41:26 PST 2021 > hfeltonad...@fw.hfelton.net:/sys/arch/amd64/compile/GENERIC.MP > real mem = 4259868672 (4062MB) > avail mem = 4115427328 (3924MB) > random: good seed from bootblocks > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xcfe8a040 (13 entries) > bios0: vendor coreboot version "v4.12.0.6" date 10/29/2020 > bios0: PC Engines apu4 > acpi0 at bios0: ACPI 6.0 > acpi0: sleep states S0 S1 S4 S5 > acpi0: tables DSDT FACP SSDT MCFG TPM2 APIC HEST SSDT SSDT DRTM HPET > acpi0: wakeup devices PBR4(S4) PBR5(S4) PBR6(S4) PBR7(S4) PBR8(S4) UOH1(S3) > UOH2(S3) UOH3(S3) UOH4(S3) UOH5(S3) UOH6(S3) XHC0(S4) > acpitimer0 at acpi0: 3579545 Hz, 32 bits > acpimcfg0 at acpi0 > acpimcfg0: addr 0xf800, bus 0-64 > acpimadt0 at acpi0 addr 0xfee0: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: AMD GX-412TC SOC, 998.29 MHz, 16-30-01 > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT > cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB > 64b/line 16-way L2 cache > cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative > cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > cpu0: apic clock running at 99MHz > cpu0: mwait min=64, max=64, IBE > cpu1 at mainbus0: apid 1 (application processor) > cpu1: AMD GX-412TC SOC, 998.13 MHz, 16-30-01 > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT > cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB > 64b/line 16-way L2 cache > cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative > cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative > cpu1: smt 0, core 1, package 0 > cpu2 at mainbus0:
update to docs/faq for partition sizes ?
howdee, this is totally not critical, but i will go ahead and ask: assuming that i have added the following to /etc/mk.conf... DEBUG=-g KEEPKERNELS=yes SUDO=doas WARNINGS=-Wall how big do i need the /usr/obj partition to be ? i do not remember specifically adjusting the /usr/xxx partitions when i was initially installing this system - but i clearly changed something... because the answer for 'df -h' is as follows: Filesystem SizeUsed Avail Capacity Mounted on /dev/sd0a 986M121M816M13%/ /dev/sd0k 18.8G1.5G 16.3G 8%/home /dev/sd0d 3.9G 10.0K3.7G 0%/tmp /dev/sd0f 5.8G2.8G2.7G51%/usr /dev/sd0g 986M236M701M25%/usr/X11R6 /dev/sd0h 15.7G286K 14.9G 0%/usr/local /dev/sd0j 5.8G4.9G636M89%/usr/obj /dev/sd0i 1.9G1.2G618M67%/usr/src /dev/sd0e 11.6G8.8M 11.0G 0%/var /dev/sd0l 1.9G344K1.8G 0%/var/log /dev/sd0m 9.7G1.3M9.2G 0%/var/www /dev/sd0n 27.1G2.0K 25.8G 0%/xtra i will include the dmesg below, altho i doubt it is critical other than to note that the size of my sd0 is 120Gb... i was also going to ask about a bunch of warnings that i saw scroll by "dwarf2 only supports one compilation unit" or something... i didnt think that these warning were important since i noticed that freebsd had already dealt with them around 2016-2018 when compiling golang... (see: https://github.com/golang/go/issues/14705) anyways - i was going to try and learn how to use the debugger, etc... and thought it would be useful to have all the symbols and code available... i got thru the https://man.openbsd.org/release step-2 and was trying to do the 'make build' of base when i ran-out-of-space... i have a feeling that i would have been fine only compiling non-debug, but figured this question might be an faq-type answer that i could ask... ok - heres my current dmesg (was running -current from a few days back until i had just-compiled the -current system i ran out of space on) fyi - this is a pcengines apu4d4 - if that helps... tia, h. OpenBSD 6.9-beta (GENERIC.MP) #0: Sat Feb 13 09:41:26 PST 2021 hfeltonad...@fw.hfelton.net:/sys/arch/amd64/compile/GENERIC.MP real mem = 4259868672 (4062MB) avail mem = 4115427328 (3924MB) random: good seed from bootblocks mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xcfe8a040 (13 entries) bios0: vendor coreboot version "v4.12.0.6" date 10/29/2020 bios0: PC Engines apu4 acpi0 at bios0: ACPI 6.0 acpi0: sleep states S0 S1 S4 S5 acpi0: tables DSDT FACP SSDT MCFG TPM2 APIC HEST SSDT SSDT DRTM HPET acpi0: wakeup devices PBR4(S4) PBR5(S4) PBR6(S4) PBR7(S4) PBR8(S4) UOH1(S3) UOH2(S3) UOH3(S3) UOH4(S3) UOH5(S3) UOH6(S3) XHC0(S4) acpitimer0 at acpi0: 3579545 Hz, 32 bits acpimcfg0 at acpi0 acpimcfg0: addr 0xf800, bus 0-64 acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: AMD GX-412TC SOC, 998.29 MHz, 16-30-01 cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB 64b/line 16-way L2 cache cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 99MHz cpu0: mwait min=64, max=64, IBE cpu1 at mainbus0: apid 1 (application processor) cpu1: AMD GX-412TC SOC, 998.13 MHz, 16-30-01 cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB 64b/line 16-way L2 cache cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative cpu1: smt 0, core 1, package 0 cpu2 at mainbus0: apid 2 (application processor) cpu2: AMD GX-412TC SOC, 998.14 MHz, 16-30-01 cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT cpu2: 32KB
