-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sunday 08 Aug 2004 23:21, Ronald Bultje wrote:
Hi,
Hi, Ronald.
On Sun, 8 Aug 2004, Anne Wilson wrote:
If you use -p C/H it might be that you don't se anything. Does -p S
work ?
If I try -p S I just get the parameters list. C and H
Hallo
Good news at last! With help from the Mandrake list we tracked down the xawtv
problem. I was given an example of the home dir. .xawtv entry, and I created
mine from that - it was originally blank. Now xawtv can play material
streamed from my camcorder, and LVS can play back avi
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sunday 08 Aug 2004 08:54, Bernhard Praschinger wrote:
After recording you can do a scendetection, or on the commandline with
that command: lav2yuv -S list.eli file.avi
Cutting the videos is not possible in LVS. For that you have glav.
OK - no
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sunday 08 Aug 2004 08:54, Bernhard Praschinger wrote:
Cutting the videos is not possible in LVS. For that you have glav.
When opening either the .eli or the .avi in glav I hear the audio, but no
video shows. Is this the same problem as in LVS
Hallo
Cutting the videos is not possible in LVS. For that you have glav.
When opening either the .eli or the .avi in glav I hear the audio, but no
video shows. Is this the same problem as in LVS or a different one?
What command do you use and what output do you get ?
Please do add to the
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sunday 08 Aug 2004 19:03, Bernhard Praschinger wrote:
Hallo
Cutting the videos is not possible in LVS. For that you have glav.
When opening either the .eli or the .avi in glav I hear the audio, but no
video shows. Is this the same
Hi,
On Sun, 8 Aug 2004, Anne Wilson wrote:
If you use -p C/H it might be that you don't se anything. Does -p S work
?
If I try -p S I just get the parameters list. C and H are the only options I
am given.
That means you compiled it without SDL support. Compile with SDL support
or use the
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Saturday 07 Aug 2004 10:49, Bernhard Praschinger wrote:
Nothing special should be needed. just installing and starting.
By now you should have seen the message I sent a few minutes ago - it needed
the creation of a personal .xawtv config file.
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Friday 06 Aug 2004 05:03, Bernhard Praschinger wrote:
Hallo
Hello, Bernie.
Depending on your card you should have loded that modules for your
DC10+:
saa7110, adv7175, zr36060, zoran.
I had all those except 'zoran'. I've added that and
Hallo
BTW: Which distribution/kernel do you use ?
Depending on your card you should have loded that modules for your
DC10+:
saa7110, adv7175, zr36060, zoran.
I had all those except 'zoran'. I've added that and restarted.
If you are not soure if the driver is correct loaded take a
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi again, Bernie. Well, I'mmaking progress at last.
I checked with Mandrake Control Centre, and it was seeing the card, but it
said that it needed the zr36067 module. I loaded that as well as all the
others that were already listed, and now glav
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Friday 06 Aug 2004 10:52, you wrote:
You don
't have a /dev/v4l/video[0-4] ?
At boot-up, no. Only when I plug in my webcam.
Do you have the /dev/video0 /dev/video1 ? And what is the stat of those
dev ? (with v4l-info)
I didn't have,
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
We first need ifnformation if you sucsessfully loaded the zoran driver.
OK - I have a working mjpegtools. I can record and play back. I've installed
LVS, and can record from there. However, I can't play back or edit. Perhaps
we now have to
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Thursday 05 Aug 2004 05:52, you wrote:
Hallo
After a change to hardware a lot of things were affected and I ended up
having to do a new install. You may recall that I have a DV10+ and am
working with an NVidia card. I have not yet
Hallo
After a change to hardware a lot of things were affected and I ended up
having to do a new install. You may recall that I have a DV10+ and am
working with an NVidia card. I have not yet reinstalled LVS. I tried to
view a previously recorded avi, but hit problems:
Does you
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
After a change to hardware a lot of things were affected and I ended up having
to do a new install. You may recall that I have a DV10+ and am working with
an NVidia card. I have not yet reinstalled LVS. I tried to view a
previously recorded avi,
16 matches
Mail list logo
