Re: [mkgmap-dev] Problems with routing on Etrek 20 with latest firmware

Try running a zip program on the non gcd file. (I normally use 7z, but I assume other will work as well) It should let you extract the GUPDATE.GCD from the .exe Bill On 08/20/2016 12:54 PM, ael wrote: On Sat, Jul 30, 2016 at 03:38:30PM -0400, Mark Bradley wrote: You may be able to locate

Re: [mkgmap-dev] Problems with routing on Etrek 20 with latest firmware

On Sun, Aug 21, 2016 at 11:28:07AM -0400, Greg Troxel wrote: > > > Thanks for posting your resolution. If I follow correctly, it sounds > like once you normalize the waypoint files, then your only real complaint > about 4.30 is startup slowness. It sounds like you can display >

Re: [mkgmap-dev] Problems with routing on Etrek 20 with latest firmware

On Thu, Jul 28, 2016 at 08:25:32PM +0100, ael wrote: > On Thu, Jul 28, 2016 at 10:29:07AM -0700, nwillink wrote: > > 2) "Route calculation error"; > > > > 3) "The route does not match the available maps. Cannot follow the roads > > > > ie > > > > 1) I have previously routed from A to B using

Re: [mkgmap-dev] Problems with routing on Etrek 20 with latest firmware

On Sat, Jul 30, 2016 at 03:38:30PM -0400, Mark Bradley wrote: > > You may be able to locate firmware for your unit at > www.gawisp.com/perry/agree.html. Thanks again for the suggestion. Unfortunately that is just an archive of the dumbed down Webupdaters (which assumes particular operating

Re: [mkgmap-dev] Problems with routing on Etrek 20 with latest firmware

> Message: 3 > Date: Thu, 28 Jul 2016 20:06:46 +0100 > From: ael > To: mkgmap-dev@lists.mkgmap.org.uk > Subject: Re: [mkgmap-dev] Problems with routing on Etrek 20 with > latest firmware > Message-ID: <20160728190646.GA4953@shelf.conquest> > Content-Type:

Re: [mkgmap-dev] Problems with routing on Etrek 20 with latest firmware

I've noted that recently Basecamp routing is very problematic if you don't start or end on a street. In general Basecamp routing got much worse with the last 2-3 versions. Also on some devices there are degradations. On 28 July 2016 at 21:34, ael wrote: > On Thu, Jul

Re: [mkgmap-dev] Problems with routing on Etrek 20 with latest firmware

On Thu, Jul 28, 2016 at 05:43:53PM +, Gary Bamford wrote: > I have seen something similar, but only when i copy a map to the gps, rather > than copy it to the sd card and then put the sd card into the gps, power > cycling the gps after copying your new map may solve the problem Again,

Re: [mkgmap-dev] Problems with routing on Etrek 20 with latest firmware

On Thu, Jul 28, 2016 at 10:29:07AM -0700, nwillink wrote: > 2) "Route calculation error"; > > 3) "The route does not match the available maps. Cannot follow the roads > precisely. Do you want to recalculate the the route?" Choosing [Yes] > gives "Route calculation error. Maps do not have

Re: [mkgmap-dev] Problems with routing on Etrek 20 with latest firmware

On Thu, Jul 28, 2016 at 04:51:11PM +0200, Thomas Morgenstern wrote: > Basecamp is available also for MAC, not only windows. I know. But I am using linux. Wine is a Windows emulation on linux, so I might try that, as I noted earlier. >Your problems are dependent from the map. Unless the reverse

Re: [mkgmap-dev] Problems with routing on Etrek 20 with latest firmware

On Thu, Jul 28, 2016 at 12:36:03PM -0400, Greg Troxel wrote: > > do you have pointers to older firmware, and can you roll back to 4.20? Garmin seem to do their best to make it difficult to get their firmware images. Anyway, I seem to remember reading that it was not possible to roll back to

Re: [mkgmap-dev] Problems with routing on Etrek 20 with latest firmware

I have seen something similar, but only when i copy a map to the gps, rather than copy it to the sd card and then put the sd card into the gps, power cycling the gps after copying your new map may solve the problem From: mkgmap-dev

Re: [mkgmap-dev] Problems with routing on Etrek 20 with latest firmware

2) "Route calculation error"; 3) "The route does not match the available maps. Cannot follow the roads precisely. Do you want to recalculate the the route?" Choosing [Yes] gives "Route calculation error. Maps do not have routable roads in this area." I ALWAYS get this on my Oregon 450 and

Re: [mkgmap-dev] Problems with routing on Etrek 20 with latest firmware

Basecamp is available also for MAC, not only windows. Your problems are dependent from the map. I would try other map. here: http://wiki.openstreetmap.org/wiki/DE:OSM_Map_On_Garmin/Download are many other sources. thomas -- Von: "ael"

Re: [mkgmap-dev] Problems with routing on Etrek 20 with latest firmware

On Thu, Jul 28, 2016 at 01:05:40PM +, Gary Bamford wrote: > Hi Ael. > > > That's a strange on, I have no experience with the Etrek 20, but my starting > point would be to load the map up into Basecamp, I would do this by putting > the sd micro into a reader that way basecamp sees exactly

Re: [mkgmap-dev] Problems with routing on Etrek 20 with latest firmware

Hi Ael. That's a strange on, I have no experience with the Etrek 20, but my starting point would be to load the map up into Basecamp, I would do this by putting the sd micro into a reader that way basecamp sees exactly the same map as the Garmin device. Regards Gary

[mkgmap-dev] Problems with routing on Etrek 20 with latest firmware

I hope this is an appropriate post for this list. Since I updated my Garmin Etrex 20 to the latest firmware (4.30 [http://www8.garmin.com/support/download_details.jsp?id=5553]), I have had problems with routing with OSM maps generated with mkgmap. So far, I have only tried standard maps from