Hi,
i finally did a test with mbim and the firmware I got from HP, without
success.
So we will stuck with the option driver here, which will be okay for me
and most of the users.
Thx for you help, I never had a device which sucked more and there about
500 Notebooks with this crap in it, which
Hi,
finally it works with the option driver.
We'll need this firmware update:
12.500.00.09.1803 Rev.A(7 Mai 2015)
http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_149013_1#tab3
--- drivers/usb/serial/option.c~2014-09-06 01:34:59.0 +0200
+++ drivers/usb/serial/option.
Hi,
any idea whats wrong trying, with the option driver?
Nov 8 17:29:39 ThinClient ModemManager[4131]: (ttyUSB0): -->
'ATD*99***1#'
Nov 8 17:29:39 ThinClient ModemManager[4131]: (ttyUSB0): <--
'+CME ERROR: 4'
Nov 8 17:29:39 ThinClient ModemManager[4131]: Simple connect
started...
N
cdc_mbim 1-3:2.0 wwan0: register 'cdc_mbim' at usb-:00:14.0-3, CDC
MBIM, 26:02:bf:cc:23:fc
usbcore: registered new interface driver cdc_mbim
usbnet_bh: cdc_mbim 1-3:2.0 wwan0: rxqlen 0 --> 5
cdc_ncm_rx_verify_nth16: cdc_mbim 1-3:2.0 wwan0: invalid NTH16 signature
<0x686d636e>
8021q: adding
Hi,
sorry... after a poweroff it is the same as before:
Nov 8 14:54:57 ThinClient ModemManager[2418]: Modem
/org/freedesktop/ModemManager1/Modem/0: state changed (connecting ->
registered)
Nov 8 14:54:57 ThinClient NetworkManager[2511]:
[1478613297.3220] (ttyUSB0): modem state changed, '
Hi,
I've tried again with option (kernel 4.8.6, ModemManager 1.6.2),
something changed.
Nov 8 14:44:05 ThinClient ModemManager[2416]: Creating modem
with plugin 'Generic' and '4' ports
Nov 8 14:44:05 ThinClient ModemManager[2416]: Could not grab
port (tty/ttyUSB2): 'Cannot add port 'tty
Hi,
I tried again with mbim, because its a branded huawei mu736.
Same results as before:
ifconfig shows errors and I don't receive any bytes.
option 1-3:2.2: GSM modem (1-port) converter detected
usb 1-3: GSM modem (1-port) converter now attached to ttyUSB0
usbcore: registered new interface driv
Nachricht-
Von: Bjørn Mork
Gesendet: Don 3 November 2016 15:42
An: Harald Jung - ECOS Technology
CC: Dan Williams ; ModemManager (development)
Betreff: Re: AW: 03f0:521d Hewlett-Packard again
Harald Jung - ECOS Technology writes:
> Hi,
>
>
>
> now i've got two notebooks wit
Hi,
I've enabled the quirk and made shure that it is active, but it doesn't make
any difference.
With ifconfig I see only tx packets, but no rx packets.
regards
Harald
-Ursprüngliche Nachricht-
Von: Bjørn Mork
Gesendet: Don 3 November 2016 15:42
An: Harald J
bNumConfigurations 1
Device Status: 0x
(Bus Powered)
regards
Harald
-Ursprüngliche Nachricht-----
Von: Harald Jung - ECOS Technology
Gesendet: Mit 21 September 2016 00:37
An: Bjørn Mork
CC: Dan Williams ; ModemManager (development)
Betreff: Re: 03f0:521d Hewlett-P
27;ll take a look in the source code tommorow.
Harald
On 22.09.2016 17:41, Dan Williams wrote:
On Thu, 2016-09-22 at 12:55 +0200, Harald Jung - ECOS Technology wrote:
Hi,
how can i tell Networkmanager to setup the IP Parameters with dhcp?
I had a problem like this with another huawei device
Hi,
how can i tell Networkmanager to setup the IP Parameters with dhcp?
I had a problem like this with another huawei device.
Harald
-Ursprüngliche Nachricht-
Von: Harald Jung - ECOS Technology
Gesendet: Mit 21 September 2016 15:12
An: Bjørn Mork
CC: Dan Williams
I've put this entry in the usb_device_id mbim_devs struct:
{ USB_VENDOR_AND_INTERFACE_INFO(0x03f0, USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM,
USB_CDC_PROTO_NONE),
.driver_info = (unsigned long)&cdc_mbim_info,
},
now the mbim driver binds to the interface and it gets a data connection
includ
c_mbim +fp"
>/sys/kernel/debug/dynamic_debug/control
ThinClient,initial:root:~ $ echo -n "1-3:2.0" >
/sys/bus/usb/drivers/cdc_mbim/bind
bash: echo: write error: No such device
Harald
On 20.09.2016 19:55, Bjørn Mork wrote:
Harald Jung writes:
Hi,
no idea what I'm doing wrong h
n 20.09.2016 13:06, Bjørn Mork wrote:
Harald Jung writes:
Hi,
to be shure i removed usb_modeswitch from the last build and i added
an udev rule, that the bConfiguration switch happened before
modemmanager was started.
usbcore: registered new interface driver usbfs
usbcore: registered new in
mbim driver detects the mbim capabilities of a device?
On 19.09.2016 23:02, Dan Williams wrote:
On Mon, 2016-09-19 at 22:06 +0200, Harald Jung wrote:
At this point i have no idea why cdc_mbim doen't grab the device.
Just that it is loaded but i think it is just loaded by cdc_ncm
depende
I was able to switch it to Configuration 2 but the mbim driver didn't
grab the device.
On 20.09.2016 04:26, Sebastian Sjoholm wrote:
I use following for Huawei ME936 to force it to MBIM;
ACTION=="add|change", SUBSYSTEM=="usb", \
ENV{DEVTYPE}=="usb_device", \
ATTR{idVendor}=="12d1", ATTR{idProd
"03f0",
ATTRS{idProduct}=="301d", ENV{ID_MM_ERICSSON_MBM}="1"
77-mm-ericsson-mbm.rules:ATTRS{idVendor}=="03f0",
ATTRS{idProduct}=="2f1d", ENV{ID_MM_ERICSSON_MBM}="1"
77-mm-fix-unexpected.rules:ATTRS{idVendor}=="03f0",
ATTRS{id
At this point i have no idea why cdc_mbim doen't grab the device.
Just that it is loaded but i think it is just loaded by cdc_ncm
dependencies.
On 19.09.2016 22:03, Bjørn Mork wrote:
Harald Jung writes:
echo "03f0 521d" > /sys/bus/usb/drivers/cdc_mbim/new_id
had no eff
figurations 1
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x
(Bus Powered)
On 19.09.2016 19:43, Bjørn Mork wrote:
Harald Jung writes:
Hi,
two years ago we had some trouble with the HP hs3110 HSPA+
https://lists.freedesktop.org/archives/
Hi,
two years ago we had some trouble with the HP hs3110 HSPA+
https://lists.freedesktop.org/archives/modemmanager-devel/2014-September/001553.html
The last time the job was done to patch the option driver, this doesn'
work with the variant of the moden i have in another HP notebook.
My last t
On 13.07.2016 12:33, Bjørn Mork wrote:
Do you have dual boot Windows or any other way to confirm whether the
modem works in that notebook? No need to make the testing harder than
necessary.
just a SSD with linux on it :/
I'll go to the office later and ask if it is possible to install a
windo
n 13.07.2016 10:20, Bjørn Mork wrote:
Harald Jung - ECOS Technology writes:
when I try to run the modem with qmi support, nm-applet askes for the
pin. The SIM accepts the PIN and after a while the motdem resets
itself and disappears from the usb bus, to show up after 1-2 seconds
again.
Hi,
when I try to run the modem with qmi support, nm-applet askes for the pin.
The SIM accepts the PIN and after a while the motdem resets itself and
disappears from the usb bus, to show up after 1-2 seconds again.
If I do it to often, the Modem changes its product_id to 9040 and has only 1
I
Hi,
Huawei/Option Device doesn't work after upgrade
Vendor=12d1 ProdID=1001 Rev=01.0
ModemManager 1.4.10
Kernel 4.1.15
Info/Logs:
http://www.hjit.de/hwtest_huawei_option.txt
regards
Harald
___
ModemManager-devel mailing list
ModemManager-devel@lists.f
Hi,
the "HP lt4112 Gobi 4G Module" can't establish a network connection.
The device is recognozied by the system, but the IP connection fails.
Details and logs can be found here: http://www.hjit.de/lt4112.txt
regards
Harald
___
ModemManager-devel mai
nope, it didn't help
Am 31.08.2015 um 20:22 schrieb João M. S. Silva:
On 08/26/2015 05:51 PM, Harald Jung wrote:
I've built a version with ModemManager started seperatly from
NetworkManager.
I can check it tommorow with a notebook, which has this problem.
D
regards
Harald
Am 26.08.2015 um 19:05 schrieb João M. S. Silva:
Hi Herald,
Did you do like this:
$ cat /etc/init/modemmanager.override
start on starting dbus
stop on stopped dbus
?
On 08/26/2015 05:51 PM, Harald Jung wrote:
Hi,
I've built a version with ModemManager started sepera
Hi,
I've built a version with ModemManager started seperatly from
NetworkManager.
I can check it tommorow with a notebook, which has this problem.
Am 26.08.2015 um 17:55 schrieb Aleksander Morgado:
On Wed, Aug 26, 2015 at 4:17 PM, João M. S. Silva
wrote:
I'm not sure I understood all the i
Hi,
we are running a selfmade Distro, which is gentoo based.
Modemmanager is started by Networkmanager via dbus.
Here is the order of the services, started by our runlevel script:
syslogd
klogd
udev
dbus
networkmanager
8 different networkservices
X
xfce (which starts nm-applet via autostart)
The
30 matches
Mail list logo