Hi Aleksander,
On Thu, Jul 23, 2020 at 8:28 AM Aleksander Morgado
wrote:
>
> Hey
>
> > > > I need to set up the default LTE bearer settings: APN, type of APN,
> > > > authentication parameters, in the Cinterion plugin.
> > > >
> > > > And for this, I am going to add the two methods:
> > > >
Hey
> > > > > > I will have to run the following sequence:
> > > > > > -go in AT+CFUN=4 (airplane mode with SIM connected). This is
> > > > > > necessary because the CID might be locked or not taken into account
> > > > > > immediately (in case there is an attach attempt ongoing).
> > > >
On Thu, Jul 23, 2020 at 8:16 AM Aleksander Morgado
wrote:
>
> > > > > I will have to run the following sequence:
> > > > > -go in AT+CFUN=4 (airplane mode with SIM connected). This is
> > > > > necessary because the CID might be locked or not taken into account
> > > > > immediately (in
Hey
> > > I need to set up the default LTE bearer settings: APN, type of APN,
> > > authentication parameters, in the Cinterion plugin.
> > >
> > > And for this, I am going to add the two methods:
> > > void (* set_initial_eps_bearer_settings)
> > > (MMIfaceModem3gpp *self, ..
> > >
> > > > I will have to run the following sequence:
> > > > -go in AT+CFUN=4 (airplane mode with SIM connected). This is
> > > > necessary because the CID might be locked or not taken into account
> > > > immediately (in case there is an attach attempt ongoing).
> > > > -set
Hi Aleksander,
> >
> > > I will have to run the following sequence:
> > > -go in AT+CFUN=4 (airplane mode with SIM connected). This is
> > > necessary because the CID might be locked or not taken into account
> > > immediately (in case there is an attach attempt ongoing).
> > > -
Hi Aleksander,
On Wed, Jul 22, 2020 at 3:47 PM Aleksander Morgado
wrote:
>
> Hey Giacinto!
>
> >
> > I need to set up the default LTE bearer settings: APN, type of APN,
> > authentication parameters, in the Cinterion plugin.
> >
> > And for this, I am going to add the two methods:
> > void
Hey Giacinto!
>
> I need to set up the default LTE bearer settings: APN, type of APN,
> authentication parameters, in the Cinterion plugin.
>
> And for this, I am going to add the two methods:
> void (* set_initial_eps_bearer_settings)
> (MMIfaceModem3gpp *self, ..
> gboolean (*
Dear all,
I need to set up the default LTE bearer settings: APN, type of APN,
authentication parameters, in the Cinterion plugin.
And for this, I am going to add the two methods:
void (* set_initial_eps_bearer_settings)
(MMIfaceModem3gpp *self, ..
gboolean (*
