c-wdm0 --wds-start-network=
> --client-no-release-cid '...
> error: couldn't start network: QMI protocol error (14): 'CallFailed'
> call end reason (1): generic-unspecified
> verbose call end reason (2,208): [internal] pdn-ipv4-call-disallowed
This says you can't use IPv4 on this
-wdm0
--get-expected-data-format'...
Expected link layer protocol retrieved: raw-ip
Device and kernel link layer protocol match: raw-ip
Starting network with 'qmicli -d /dev/cdc-wdm0 --wds-start-network=
--client-no-release-cid '...
error: couldn't start network: QMI protocol error (14): 'CallFailed
dem to APN
After this step I always get the error:
error: couldn't connect the modem:
'GDBus.Error:org.freedesktop.libqmi.Error.Protocol.CallFailed: QMI protocol
error (14): 'CallFailed''
It looks like it is connecting right but then this error happens and I dont
achieve to set the status = Conne
2021 18:42
An: Federico Murciano
Cc: modemmanager-devel@lists.freedesktop.org
Betreff: Re: QMI protocol error (14): 'CallFailed''
Hi Federico,
On Sat, Feb 27, 2021 at 6:16 PM Federico Murciano
wrote:
>
>
> Hardware:
> Quectel
> RG500QEA_VH
> firmware revisio
yrak
Von: Giacinto Cifelli
Gesendet: Freitag, 26. Februar 2021 17:13
An: Federico Murciano
Cc: modemmanager-devel@lists.freedesktop.org
Betreff: Re: QMI protocol error (14): 'CallFailed''
Hi Federico,
On Fri, Feb 26, 2021 at 4:52 PM Federico Murciano
w
Hi Federico,
On Sat, Feb 27, 2021 at 6:16 PM Federico Murciano
wrote:
>
>
> Hardware:
> Quectel
> RG500QEA_VH
> firmware revision: RG500QEAAAR11A03M4G
according to the brochure it might support VoLTE.
I think the normal profile for t-mobile uses CID #2 for the combined
attach (and
?
>
>
> Could someone give me a hint? Thanks. The error is the following:
>
>
> sudo mmcli -m 0 --simple-connect="apn=internet.telekom"
>
> error: couldn't connect the modem:
> 'GDBus.Error:org.freedesktop.libqmi.Error.Protocol.CallFailed: QMI protocol
> error (14)
