Getting a List of provisioned contexts

2015-08-13 Thread Andreas Fett
Hello List, during connect the ModemManager debug logs show a List of provisioned contexts. I assume that those are stored on the sim or in the modem itself. Is there a way to query this list via the dbus api? Cheers Andreas ___ ModemManager-devel

Re: FCC authentication with QMI over MBIM; try 1

2016-06-13 Thread Andreas Fett
Hi Stefan, On 13/06/16 11:44, Stefan Armbruster wrote: > @Andreas: Can you check if you're seeing only outgoing packets on the > device as well using tcpdump? That's what I'm getting here in case I > do have weak signal. Yes, that's what I'm seeing. Although the Signal quality as reported by

Re: Huawei me906s-158

2016-03-11 Thread Andreas Fett
Hi Bjørn, On 11/03/16 12:16, Bjørn Mork wrote: > I went back to your lsusb output to see if I could see anything strange > wrt the LPM settings, but the whole dump was strange.. Did you use a > very old lsusb version? The device says > > bcdUSB 2.10 > > so it must have a BOS

Re: Huawei me906s-158

2016-03-11 Thread Andreas Fett
Hi Bjørn, On 10/03/16 18:39, Bjørn Mork wrote: > Andreas Fett <andreas.f...@secunet.com> writes: >> I still have to load the mbim_module manually and sometimes I'm able to >> "talk" to it. I have no clue which factors lead to success or failure here. > > H

Re: Huawei me906s-158

2016-04-07 Thread Andreas Fett
Hi Bjørn, On 06/04/16 13:00, Bjørn Mork wrote: > So your best option at the moment is probably to run a script from udev > using delays tuned to whatever seems to work. Yes, we did that for now and have a working setup. If you have any patches you would like me to test, either for the

Re: Huawei me906s-158

2016-04-12 Thread Andreas Fett
Hi Bjørn, On 12/04/16 14:13, Bjørn Mork wrote: > Andreas Fett <andreas.f...@secunet.com> writes: >> System (cold) boots with /sys/bus/usb/devices/1-2/bConfigurationValue of >> "2". >> >> echo 0 > /sys/bus/usb/devices/1-2/bConfigurationValue >> e

Re: Huawei me906s-158

2016-03-03 Thread Andreas Fett
Hello Bjørn, On 02/03/16 23:11, Bjørn Mork wrote: > Andreas Fett <andreas.f...@secunet.com> writes: >> Interface Descriptor: >> bLength 9 >> bDescriptorType 4 >> bInterfaceNumber0 >> bAlternat

Re: Huawei me906s-158

2016-03-03 Thread Andreas Fett
Hi Aleksander, On 03/03/16 16:24, Aleksander Morgado wrote: > I'm assuming ModemManager runs as root; is there any other program > making use of the proxy here? mbimcli maybe? In order to avoid these > kind of issues, the quickest solution is to always run everything as > root, or under sudo for

Re: Huawei me906s-158

2016-04-04 Thread Andreas Fett
Hi Bjørn, sorry for the delay, but I wanted to give a quick update. On 11/03/16 14:29, Bjørn Mork wrote: > Thanks. Looks good to me, but I don't understand much of this. Like: > The device support SS and is internally connected to an xhci controller > via an m.2 slot, but still runs in HS

Sierra Wireless EM7455

2016-04-05 Thread Andreas Fett
Hi list, I'm dealing with a Sierra Wireless EM7455 as used in Lenovos T460s. For this modem the mbim driver attaches and works well (ie the sim can be unlocked) until I try to connect. It then fails during a "set radio-state" command. I tried mbimcli with --set-radio-state=on with the same

Re: mbim Bearer reports IP_METHOD_DHCP when namesservers are missing

2016-04-20 Thread Andreas Fett
Hi, any news on this one? On 03/12/15 17:54, Dan Williams wrote: > For IPv6 MM should report "DHCP" if there is *any* information missing > (DNS or Gateway) because that may have to be acquired via SLAAC or > DHCPv6. MM should also fill in any information it already has, even if > it sets DHCP

Re: mbim Bearer reports IP_METHOD_DHCP when namesservers are missing

2016-04-21 Thread Andreas Fett
Hi Dan, On 20/04/16 18:13, Dan Williams wrote: > Does the following patch work for you? > It does, although I could not test the v6 part. Andreas signature.asc Description: OpenPGP digital signature ___ ModemManager-devel mailing list

Re: Huawei ME906s does not connect

2016-06-29 Thread Andreas Fett
Hi Philipp, On Wed, Jun 29, 2016 at 10:01:42PM +0200, Philipp Hagemeister wrote: > Just to be certain, I have most definitly attempted a connection here > (after /sys/bus/usb/devices/1-5/bConfigurationValue = 3, i.e. MBIM): As Bjørn said, the trick is to unconditionally switch first to 0, wait a

Re: Huawei ME906s: mbim transaction timeout

2016-11-14 Thread Andreas Fett
Hi list, just to give you an update on this: On 02/11/16 15:15, Andreas Fett wrote: > for certain SIM cards (Vodafone Germany) and in certain Systems (ie. > Lenovo t460s) ModemManager seems to have trouble detecting the modem. Lenovo changed the modems firmware somewhere between 04/16 and

Re: Huawei ME906s: mbim transaction timeout

2016-11-14 Thread Andreas Fett
Hi Aleksander, On 14/11/16 15:31, Aleksander Morgado wrote: > On Mon, Nov 14, 2016 at 3:06 PM, Andreas Fett <andreas.f...@secunet.com> > wrote: >> >> ModemManager 1.6.x however has no trouble dealing with either one >> which is why I won't investigate this a

Huawei ME906s: mbim transaction timeout

2016-11-02 Thread Andreas Fett
Hi, for certain SIM cards (Vodafone Germany) and in certain Systems (ie. Lenovo t460s) ModemManager seems to have trouble detecting the modem. We have observed this for a couple of those combinations. Other SIM cards seem to work fine and other thinkpad models aren't affected either. The log

Re: Huawei ME906s: mbim transaction timeout

2016-11-02 Thread Andreas Fett
Hi, On 02/11/16 17:15, Dan Williams wrote: > > How long after the transaction timeout does the MBIM reply come in? > Also, how long until the indication for SIM/PAC? > That question I asked myself, too... Is there any way of enabling the timestamping for the libmbim logs/dumps, too? I will

Sierra Wireless em7345 disconnects from USB Bus

2018-08-27 Thread Andreas Fett
Hi, recently we got reports from customers in the Netherlands and some parts of Germany that their Sierra Wireless EM7345 modems (all build into various Lenovo laptops) stopped working. In Germany this has so far only be the case for Deutsche Telekom SIM cards. I strongly suspect this has

bearer mbim: ipv6_config set to dhcp when no ipv6 is available

2018-10-05 Thread Andreas Fett
Hi list, I noticed, that in ip_configuration_query_ready() ipv6_config will be allocated and method will be set to MM_BEARER_IP_METHOD_DHCP even when ipv6configurationavailable is false, just based on the value of ctx->ip_type. So essentially every bearer which was *configured* with ip_type v6

Re: bearer mbim: ipv6_config set to dhcp when no ipv6 is available

2018-10-07 Thread Andreas Fett
Hi, On Sat, Oct 06, 2018 at 02:49:32PM +0200, Aleksander Morgado wrote: > > I could be mis-remembering, but I don't think this was intentional and > > if MBIM says IPv6 isn't available, then MM shouldn't say it's available > > either. > > > > Bjorn or Aleksander, do you have more experience here

Re: Re: bearer mbim: ipv6_config set to dhcp when no ipv6 is available

2018-10-09 Thread Andreas Fett
Hi Reinhard, On Tue, Oct 09, 2018 at 10:27:41PM +0200, Reinhard Speyerer wrote: > for IPType IPv4v6 the IPType returned may be IPv4 or IPv6 instead of IPv4v6 > in the case where PDP context activation is accepted by the network but it > returns a SM Cause 2 IE like this: > ... Yes, thank you. I

Re: Problems compiling with clang (3.8.21)

2019-04-05 Thread Andreas Fett
Hi, On 05/04/19 10:03, Aleksander Morgado wrote: >> >> and the compilation was successful with clang 3.8.21. >> Would it be possible to add a clang build the freedesktop gitlab CI? I looked around a little bit, but unfortunately couldn't figure out what image to use. Maybe there is someone on

Re: Regression regarding ip_type when updating from 1.10.4 to 1.12.0

2019-11-14 Thread Andreas Fett
Hi Aleksander, On Thu, Nov 14, 2019 at 06:57:54PM +0100, Aleksander Morgado wrote: > > > > Has the interpretation of the ip_type MM_BEARER_IP_FAMILY_IPV4V6 changed > > when performing the connect? > > > > No it hasn't really. I really think you need to know whether the > network supports ipv4v6

Re: Fibocom L850-GL / Intel XMM7360

2020-06-21 Thread Andreas Fett
Hello list, On Thu, Jun 18, 2020 at 03:36:25PM +0200, Bjørn Mork wrote: > Anyway, FWIW, I'd explore the PCIe driver option first if I were you. > That's the only mode tested by anyone, so it is more likely to work. Is there anybody reading this willing and knowlegable enough to work on a kernel

Re: [RFC] New 'ConnectionError' property in the Bearer objects

2021-05-18 Thread Andreas Fett
Hi Aleksander On Tue, May 18, 2021 at 11:35:56PM +0200, Aleksander Morgado wrote: > The merge request also includes a bunch of improvements regarding to > error handling inside the MM daemon; like updated mobile equipment > errors per the latest 3GPP specs or improved QMI/MBIM error mappings > to