Jon Wanderer wrote:
Hi there,
I've spent a few months assembling and using my mythbox, and I'd just
like to say thanks to everyone who has put this software together--it's
great. I saw some room for improvement in the mythgame interface that
the updates in 0.18 made possible and I put this patch
Daniel Kristjansson writes:
On Sat, 2005-04-23 at 02:05 +, [EMAIL PROTECTED] wrote:
Changes committed by danielk on Sat Apr 23 02:04:33 2005
snip
Log Message:
NOTE: I recommend a make distclean...
Since moving to 0.18 and switching to tv-out on an Nvidia
card. I have noticed that the on screen menus and channel information
frequently appear offset to the right on some sometimes chopping the roght hand
edge of the display. Sometimes a channel will start with the displays correctly
--- Roger James [EMAIL PROTECTED] wrote:
Since moving to 0.18 and switching to tv-out on an
Nvidia card. I have
noticed that the on screen menus and channel
information frequently appear
offset to the right on some sometimes chopping the
roght hand edge of the
display. Sometimes a channel
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
--- Roger James [EMAIL PROTECTED] wrote:
Since moving to 0.18 and switching to tv-out on an
Nvidia card. I have
noticed that the on screen menus and channel
information frequently appear
offset to the right
Hi All,
Im a new member of this list - and fairly new to mythtv (since just before
0.17)
now im running CVS (due to daniels XvMC patches :P your a champ!)
however after reading through some discussion on reducing channel change
time (and having done some of my own dvb grabbing code) i find it
On Sat, 2005-04-23 at 22:19 -0600, Devan Lippman wrote:
may be related, all the tools built from the CVS seem to end with
segmentaiton faults now. Before they all ran fine.
I can trace it back as far as mythtv/libs/libmyth/util-x11.h
not sure the debug mode compiled correctly so here's the
On Sun, 2005-04-24 at 17:14 +0930, Ian Dall wrote:
However, switching between SD and HD channels in Live TV browse mode
triggered this SIGABRT:
Does this happen only on the switch to HD, or also on the switch to SD?
-- Daniel
___
mythtv-dev mailing
Daniel Kristjansson wrote:
This is the first report of this. Can you try an early version of the
patch, 1-5 ish to see if this happens in that patch. Also, what kind
of hardware and drivers are you using?
I was trying v1 of the patch, and to do so, I had to revert back to Mar
30 CVS. However,
The attached patch and file allow full scanning for dvb-t channels in
various countries. (UK and Aus mainly).
dvbtypes.cpp need to be in libmythtv which is where the patch needs to
be applied.
I'd appreciate some testing from people, (not just dvb-t) since I've
touched just about all the ui in
Daniel Kristjansson writes:
On Sun, 2005-04-24 at 17:14 +0930, Ian Dall wrote:
However, switching between SD and HD channels in Live TV browse mode
triggered this SIGABRT:
Does this happen only on the switch to HD, or also on the switch to SD?
Channel switching in general seems to
Nothing changed :- (
used today's CVS
--
Thanks,
Devan Lippman [EMAIL PROTECTED]
On 4/24/05, Daniel Kristjansson [EMAIL PROTECTED] wrote:
On Sat, 2005-04-23 at 22:19 -0600, Devan Lippman wrote:
may be related, all the tools built from the CVS seem to end with
segmentaiton faults now.
Hello all!
I have made Debian packages for mythtv that have via XvMC support
compiled in. So far (for me) they have worked very well. I have also
made debs for the unichrome X drivers/xvmc libraries.
The repositories are located at
http://www.csd.uwo.ca/~mfgalizi/debian, along with
John Pullan skrev:
The attached patch and file allow full scanning for dvb-t channels in
various countries. (UK and Aus mainly).
dvbtypes.cpp need to be in libmythtv which is where the patch needs to
be applied.
I'd appreciate some testing from people, (not just dvb-t) since I've
touched just
Quoting Trey Boudreau [EMAIL PROTECTED]:
-PID--FREQ-BANDWIDTH-BANDWIDTH-
9 p/s 1 kb/s14 kbit
0030 2 p/s 0 kb/s 4 kbit
0031 10372 p/s 1904 kb/s 15599 kbit
0034 264 p/s48 kb/s 397 kbit
0035 132 p/s24 kb/s 198 kbit
2000 10781 p/s 1979 kb/s
[Using this thread, but it applies to my other patches as well]
With 0.18 out of the way, I thought it might be a nice time to apply my
patches, before 0.19 will come along :-)
Herman
-
Herman Kuiper - m: [EMAIL PROTECTED] -
Personally, I'm never too keen on hardcoding stuff like this - for
every person with 11,000 games there's probably someone else with 100
games or so who doesn't need all these different roots.
I am. I hate having quite so many config options. There isn't enough
time in the day to figure out
Hi,
When I'm editing a particular recording I get a SEGV with the backtrace
shown belowIt always happens at around the same point in the
recording, and It seems to only be this recording, so maybe the
recording has some corruption? This is with a CVS from around 00:00GMT
24/04/05. Let me know
How's this?
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 1224739760 (LWP 22077)]
0x41c1d7da in memcpy () from /lib/tls/libc.so.6
(gdb) bt full
#0 0x41c1d7da in memcpy () from /lib/tls/libc.so.6
No symbol table info available.
#1 0x402a4d7d in OSDTypeImage::Draw
Your carrier is not sending PSIP at all.. There is supposed to be data on the
1FFB PID, and that is why the scan is hanging..
This happened again tonight on WFXT (Boston area FOX affiliate). There
needs to be a workaround for this: I'm perfectly willing to deal with
the extra space taken up by
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Kyle Rose wrote:
Your carrier is not sending PSIP at all.. There is supposed to be data on the
1FFB PID, and that is why the scan is hanging..
This happened again tonight on WFXT (Boston area FOX affiliate). There
needs to be a workaround for
Kyle == Kyle Rose [EMAIL PROTECTED] writes:
Taylor Your carrier is not sending PSIP at all.. There is supposed to
Taylor be data on the 1FFB PID, and that is why the scan is hanging..
Kyle This happened again tonight on WFXT (Boston area FOX affiliate).
Kyle There needs to be a workaround for
Hi,
I haven't been able to get live to tv to work with the XVMC-VLD driver
since 0.16. I just updgraded to 0.18 and I get the same problem.
I can watch DVDs, videos and even live dvb streams perfectly (4-10%
CPU usage) using xine with the XVMC-VLD driver, so I'm pretty sure my
setup is correct.
Personally, I'm never too keen on hardcoding stuff like this - for
every person with 11,000 games there's probably someone else with
100 games or so who doesn't need all these different roots.
I am. I hate having quite so many config options. There isn't enough
time in the day to
Hi,
The current MythTv CVS version (2004-04-25) of the Xv/XvMC merge appears
to be broken on a Via M10K box using XvMC VLD acceleration.
Problems are:
1. If DVB-T cards are set to TS mode the system will show TV
on startup, but will fail on channel change.
Before changing channel
25 matches
Mail list logo