Hello,
I made fresh installation (first time ever) Everything works fine about 24h. I
change default theme to dffrent and then something went broken.
if i start mythfrontend I can hear sound but tv-picture is missing. Only black
screen. It gives error like this and screen is 640x480.
[EMAIL
Hey All,
Any help in isolating this problem would be great.
I can watch live TV with TVtime. Mythtv will not tune-in channels.
Mythtv seems to be set up correctly as the channels appear to change
and the channel descriptions correctly indicate the show which is
currently broadcast.
I use an
H P Ladds wrote:
Hey All,
Any help in isolating this problem would be great.
I can watch live TV with TVtime. Mythtv will not tune-in channels.
Mythtv seems to be set up correctly as the channels appear to change
and the channel descriptions correctly indicate the show which is
Richard,
Thank you.
1) I don't have ivtv-tune installed; however, I don't use Conextent's
CX23415/CX23416 chips. I DO user their Bt878 chipset. From what I've
briefly read, IVTV is not for use with BT878. Should I install it
anyway?
2) Nor do I have /etc/conf.d/mythbackend; however, my
1) I don't have ivtv-tune installed; however, I don't use Conextent's
CX23415/CX23416 chips. I DO user their Bt878 chipset. From what I've
briefly read, IVTV is not for use with BT878. Should I install it
anyway?
2) Nor do I have /etc/conf.d/mythbackend; however, my backend seems
to be
I have tried this. It is possible by using alsactl to capture the line out and redirect. The problem is that the sound quality is very poor when you do this. I beleive the artical on how to do this was on the myth wiki site. My advice is not to try.
On 12/23/05, Rajeev Goonewardene [EMAIL
I thought I was having a problem when I first tried this, but it turned out to be a lot of excess in/outputs turned on that didn't need to be causing insane amounts of noise. I also didn't have my capture level high enough so I was blasting my receiver to compensate. Once I turned off anything I
Hi,
I have successfully got mythtv working and it works great - very
impressed by the work, thank you Issac and Jarod for the great
software and howtos. One small question, I have the PVR-350 card and
I was wondering if I can get mplayer to play the DVD sound through
the PVR350's audio
Rajeev Goonewardene wrote:
I have successfully got mythtv working and it works great - very
impressed by the work, thank you Issac and Jarod for the great
software and howtos. One small question, I have the PVR-350 card and
I was wondering if I can get mplayer to play the DVD sound
Hi All,
I have just configured MythTV on a FC4 install and it workins fine. i have
two DVB cards a DVICO and a NEBULA. Picture is pretty good on both (some
breakup on HD but maybe a aerial prob or some fine tuning), but I have a
problem on the Australian SD channel 7, no sound, picture is fine.
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
I having problems compiling mythtv on slackware 10.1 and qt 4.0.1
could it be qt 4 incompatibility problems?
Thanks.
ERROR:
dialogbox.cpp:22: error: `WordBreak' undeclared in namespace `Qt'
dialogbox.cpp:24: error: no matching function for call to `QVBoxLayout::
QVBoxLayout(DialogBox* const,
Bruno Miguel wrote:
I having problems compiling mythtv on slackware 10.1 and qt 4.0.1
could it be qt 4 incompatibility problems?
Thanks.
MythTV has not been ported to Qt 4 yet. Use Qt 3.3.x instead.
-JAC
___
mythtv-users mailing list
hi there all
i'm a complete linux newbie and have tried the knopmyth cd yesterday for the first time. I like what it offers but had some problems allready. However before i will start takling the problems i encountered running some of the options i would like to know if there is a way if running
michel moalem wrote:
hi there all
i'm a complete linux newbie and have tried the knopmyth cd yesterday
for the first time. I like what it offers but had some problems
allready. However before i will start takling the problems i
encountered running some of the options i would like to know if
On 10/21/05, michel moalem [EMAIL PROTECTED] wrote:
hi there all
i'm a complete linux newbie and have tried the knopmyth cd yesterday
for the first time. I like what it offers but had some problems
allready. However before i will start takling the problems i
encountered running some of the
If noise is the problem, go to www.silentpcreview.com they have lots of information on quieting a loud case.
On 10/21/05, Mercury Morris [EMAIL PROTECTED] wrote:
On 10/21/05, michel moalem [EMAIL PROTECTED]
wrote:
hi there alli'm a complete linux newbie and have tried the knopmyth cd
Folks,
I'm building a frontend box to go with a tv that is 1080i capable. I'm
not
planning on tuning HDTV, and I'm not likely to play dvds through the myth
box, so I don't have a compelling reason to drive the tv as an HDTV.
The question is: For regular format tv, would I be
I'm new to this list
but have thinking about building a MythTV box of a year or so. I've now
started ordering bits (well a antec overture II case) and am planning on using
a Hauppauge WinTV NOVA-t freeview PCI card and Ubuntu/512MB memory.
As you can probably imagine, I have a few
I use twin Hauppauge NovaT PCIs on a Celeron 2.4Ghz, and there is CPU
space aplenty for recording TV on both cards, and watching a recording
at the same. They take very little CPU at all , its mainly the
playback (mpeg decoding) that has the cpu hit, but even then, I'm well
under 20% CPU usage.
Firstly what
processor should I get. I had a AMD Sempron 3000+to 3400+ in mind.
If you have not planned to do HDTV, then these processors are overkill.
I use an AMD 1800+, which uses around 25% of its CPU when decoding to a
GeForce4 MX440.
What I was hoping on being able to do is allow the TV
[mailto:[EMAIL PROTECTED]Sent: 26 September 2005
10:26To: Discussion about mythtvSubject: Re:
[mythtv-users] (no subject)
Firstly what processor should I get. I
had a AMD Sempron 3000+to 3400+ in mind.
If you have not planned to do HDTV, then these processors
On 26/09/05, Ben Edwards [EMAIL PROTECTED] wrote:
I'm new to this list but have thinking about building a MythTV box of a year
or so. I've now started ordering bits (well a antec overture II case) and
am planning on using a Hauppauge WinTV NOVA-t freeview PCI card and
Ubuntu/512MB memory.
-Original Message-
From: David Watkins [mailto:[EMAIL PROTECTED]
Sent: 26 September 2005 10:43
To: MythTV Users List
Subject: Re: [mythtv-users] (no subject)
...
The NOVA-t PCI card writes the incoming mpeg stream to a file on your
hard disk. Multiple cards allow you
Now I get it ;) So it is a graphics card with TV out connected to the TV, I
guess the TV outs on the TV cards are all daisy chained into the Graphics
card (with TV in/out). I did not realise I would need a graphics card with
TV out as well as the freeview cards. I thought the TV out on the
On 26/09/05, Ben Edwards [EMAIL PROTECTED] wrote:
-Original Message-
From: David Watkins [mailto:[EMAIL PROTECTED]
Sent: 26 September 2005 10:43
To: MythTV Users List
Subject: Re: [mythtv-users] (no subject)
...
The NOVA-t PCI card writes the incoming mpeg stream to a file
Please unsubrcribe me, thanks
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Thanks !
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Thanks for letting me play and thanks to all those who've given there own time.
I installed mythtv-suite on FC4 per Jarod's excellent FC3 instructions
--before the recent updates to Jarod's page.
All was well except mythmusic. I had the same buffer overrun described by
others (link to that
[EMAIL PROTECTED]
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Hi,
I've got and ATI TV Wonder Pro card (cx88 chip set) and I understand
the latest version of the Wonder Pro does not work with Myth?
I only get static when I use the MPEG2 driver. The card does work
with my FC3 system, and I can watch TV with other TV Tuner
applications. I get this over and
I am having a problem with my new KnoppMyth box.
1. Everytime I change the channel the video and sound skip some.
Sometimes this continues, but can be fixed by pausing the video and
waiting a few seconds
2. Both Live tv and recorded seem to have extremely low frame rates.
The video is much more
Looks like Xbox myth packages are up. I checked
http://dijkstra.csh.rit.edu/~mdz/debian/dists/unstable/mythtv/ today
and saw a bunch of 18's, but I haven't tried upgrading yet.
The name at the bottom of the page says Matt Zimmerman. Thanks Matt.
___
Just finished upgrading. It didn't get the themes package, so I tar'd
it up from my red hat backend and copied it over to the xbox. It's up
and working now. Thanks!
On 5/12/05, Brian Meehan [EMAIL PROTECTED] wrote:
Looks like Xbox myth packages are up. I checked
mythtv'quot;
lt;mythtv-users@mythtv.orggt;
gt;Subject: RE: [mythtv-users] (no subject)
gt;Date: Sun, 1 May 2005 11:27:00 -0700
gt;
gt;
gt;
gt; gt; -Original Message-
gt; gt; From: [EMAIL PROTECTED]
gt; gt; [mailto:[EMAIL PROTECTED] On Behalf Of Jerry
Danzinger
gt; gt; Sent: Sunday, May 01
I am looking to set my computer up with mythtv so I can watch/record shows on my computer. The problem is I am using Direct Tv's satellite service and i have found no information on what tuner card to use, and how to set it up. I was wondering if anyone else sucessfully did this, and if they
I have read some about this. Theoretically you can use any card you
want to record the video, but none that I know of will change the
channels directly. There is some stuff out there about serial control
of the DTV box by using a special serial cable from your computer to
the data port on the back
--- Jerry Danzinger [EMAIL PROTECTED]
wrote:
-
I am looking to set my computer up with mythtv so I
can watch/record shows on my computer. The problem is
I am using Direct Tv's satellite service and i have
found no information on what tuner card to use, and
how to
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jerry Danzinger
Sent: Sunday, May 01, 2005 9:21 AM
To: mythtv-users@mythtv.org
Subject: [mythtv-users] (no subject)
I am looking to set my computer up with mythtv so I can watch/record
shows
[EMAIL PROTECTED] wrote:
same...just static. Watching videos (from other sources) play just fine
in both mplayer
and mythtv.
/sbin/modprobe i2c-core
/sbin/modprobe i2c-algo-bit
/sbin/modprobe tuner type=47
/sbin/modprobe msp3400
/sbin/modprobe videodev
/sbin/modprobe saa7115
/sbin/modprobe ivtv
[EMAIL PROTECTED] 04/03/05 7:30 AM
I am building a PVR with a Hauppauge PVR-350, Mandrake 10.1, Maiku's
guide
(http://www.byopvr.com/Sections+index-req-viewarticle-artid-13-page-1.html).
Everything is installed/compiled and configured, but when I try to
watch
TV or record something, all
: [EMAIL PROTECTED]
To: mythtv-users@mythtv.org
Sent: Sun, 3 Apr 2005 06:30:08 -0500 (CDT)
Subject: [mythtv-users] (no subject)
I am building a PVR with a Hauppauge PVR-350, Mandrake 10.1, Maiku's guide
(http://www.byopvr.com/Sections+index-req-viewarticle-artid-13-page-1.html).
Everything
Can someone please help me with this.
All I need mysql for is to run mythtv.
To use SET PASSWORD on Unix, do this:
shell mysql -u root
mysql SET PASSWORD FOR ''@'localhost' = PASSWORD('newpwd');
mysql SET PASSWORD FOR ''@'host_name' = PASSWORD('newpwd');
In the second SET PASSWORD statement,
On Wed, 23 Mar 2005 10:06:57 -0800, Don [EMAIL PROTECTED] wrote:
Can someone please help me with this.
All I need mysql for is to run mythtv.
To use SET PASSWORD on Unix, do this:
shell mysql -u root
mysql SET PASSWORD FOR ''@'localhost' = PASSWORD('newpwd');
mysql SET PASSWORD FOR
Brad Benson wrote:
On Wed, 23 Mar 2005 10:06:57 -0800, Don [EMAIL PROTECTED] wrote:
Can someone please help me with this.
All I need mysql for is to run mythtv.
To use SET PASSWORD on Unix, do this:
shell mysql -u root
mysql SET PASSWORD FOR ''@'localhost' = PASSWORD('newpwd');
mysql SET
On Wed, 23 Mar 2005 10:34:32 -0800, Don [EMAIL PROTECTED] wrote:
Brad Benson wrote:
mysql hostname;
ERROR 1064: You have an error in your SQL syntax. Check the manual that
corresponds to your MySQL server version for the right syntax to use
near 'hostname' at line 1
Don, i believe you
Andrew Close wrote:
On Wed, 23 Mar 2005 10:34:32 -0800, Don [EMAIL PROTECTED] wrote:
Brad Benson wrote:
mysql hostname;
ERROR 1064: You have an error in your SQL syntax. Check the manual that
corresponds to your MySQL server version for the right syntax to use
near 'hostname' at line 1
Yes, 'hostname' at the $ promt worked. Thank you.
Ahh...so I can clean up my act, what exactly is top posting?
dlw
Posting above the other people's posts. It makes the discussion travel
from the bottom up rather than the prefered top down. Basically when
you post people would prefer you
Is there any way to configure MythTV to use a Proxy for HTTP
access? I am behind a firewall and a direct connection will not
work for me.
Thanks in advance,
Mike
___
mythtv-users mailing list
mythtv-users@mythtv.org
Cook, Michael J. (Business Development) wrote:
Is there any way to configure MythTV to use a Proxy for HTTP access? I
am behind a firewall and a direct connection will not work for me.
If you're talkabout about the datadirect grabber, yes. It uses wget and
you need to set wget for proxy
Cook, Michael J. (Business Development) wrote:
Is there any way to configure MythTV to use a Proxy for HTTP access? I am
behind a firewall and a direct connection will not work for me.
export HTTP_PROXY=http://proxyserver.com:port/
signature.asc
Description: OpenPGP digital signature
This is on a Gentoo system. I checked all the flags that I can find
and
rebuilt FFMPEG. Still no joy. :(
nuvexport --transcode
Dunno what's up with gentoo and ffmpeg, lots of people seem to have
trouble with it.
Thanks, I'll give that a try.
I'm prepared to investigate this a bit if
xebian using software from http://bit.blkbk.com/
I had to use mythtv-xbox.0.4.5-beta.tar.gz since the perl script in the
latest (stable?) just hangs and dies on me.
got a strange issue with mplayer and lirc. this actually happens in
mythfrontend or outside of it, so its not myth specific. with
Hi again!
I sent some questions just an hour ago and got some good replies that really helped me figure out how to start my emulator in mythgames correct. However I still have one problem the emulator won't function at fullscreen however I can live with that if I only can get the emulator window
Radek Wrote:
Hi everybody,
today, I tried to flash (using ASUS windows Update utility from the
file) the Pundit BIOS from the 1005 to latest release found on the web -
1009. During the flash process it failed to verify - checksum failed. I
tried multiple times, but without success. So I
I have been struggling, on and off, with getting my DVD player
working with Myth for months (Its actually a DVD writer -- but I'll
wait to tackle that until I can at least get the player part working).
I eventually got it setup and could play dvds, but couldn't transcode
them. Well, I finally
Greetings,
I originally posted this on the ivtv-devel list but there's not much
activity there so I decided to try here.
I just purchased some new hardware and am building a MythTV box based on
Jarod Wilson's HOWTO at http://wilsonet.com/mythtv/fcmyth.php. I've gotten
to the portion of the
Greetings,
I originally posted this on the ivtv-devel list but there's not much
activity there so I decided to try here.
I just purchased some new hardware and am building a MythTV box based on
Jarod Wilson's HOWTO at http://wilsonet.com/mythtv/fcmyth.php. I've
gotten
to the portion of
I just purchased some new hardware and am building a MythTV box
based on
Jarod Wilson's HOWTO at http://wilsonet.com/mythtv/fcmyth.php.
I've gotten
to the portion of the HOWTO, after installing the ivtv stuff using
apt-get,
where I send a test signal to the TV-Out of the PVR-350. When
___
mythtv-users mailing list
[EMAIL PROTECTED]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
60 matches
Mail list logo
