Chris Petersen wrote:
Just checked into this further.. the sql is wrong.. 'record' is not
in the from part of the sql clause..
I have a patch to fix this. Looks like whoever sent the recording
group patch put his mods into the wrong part of teh query. Will try
to apply it tonight after
Need IR receiver recommendation. Needs to be compatible with MythTV. I
would also like to use it with xine and tvtime. I don't want to build
one. I want to buy one. Recommendations?
I got mine from
http://lnx.manoweb.com/lirc/?partType=sectionpartName=buy
It was only 12EUR (£9) including
Hi Mark,
I can't see how the offset is supposed to straddle daylight saving
change. Perldoc reports 'tz_local_offset() determins the offset from
GMT time in seconds. It only does the calculation once.' Date::Manip
is also brain dead.
Modified the rating fix and seems to work.
Left out a few
Hi All,
I have a few questions regarding the captioned:
1) Does LIRC now have support for the USB-UIRT ?
2) Specifically, do the LIRC rpms provided by ATrpms have this support ?
3) If not does anyone know where to get a recent patch that enables full
USB-UIRT functionality with LIRC whether
On Wed, 01 Dec 2004 14:25:30 +0700, Ketut Putu Kumajaya
[EMAIL PROTECTED] wrote:
Mythfm is a good module for mythtv, but I wait too long to see it fully
useable and easy. Easy for me and my wife, too.
So I build a module base on kradio-0.3.0-snapshot-2004-02-28. I have no
idea
for module
. . wrote:
Hello all,
FC2 and HD3000 hints below
Short question: How to enable sound out on HD3000 in Mythtv?
[snip]
I am running the card as a generic v4l caputure card.
As you have probably guessed, you are in uncharted territory here. Most
people use the HD3000 to capture digital HDTV
This is proving to be a tough nut to crack.
Met with success last night! I had stopped off and bought some DVD-Rs and on a
whim picked up a another brand of CD-RWs (Maxell) I gave the CD-RWs a try first
and it booted right up.
(And there was great rejoicing..yeaah)
So now I'm onto the
On Tue, Nov 30, 2004 at 10:34:15PM -0800, Darren Martz wrote:
I am wondering if there is support for the Twinhan VP-1020A DVB card?
It's rather difficult to determine from google :)
I am not familiar with the 1020a (I have a 1020) but if the card is
supported by Linux, it'll be supported by
I have that same model card and had both issues you're describing.
On Wed, 1 Dec 2004 11:04:53 -0500, sdk [EMAIL PROTECTED] wrote:
1) If I run that command after depmod -a and before modprobe ivtv, I
am able to see the output clearly on the TV, with the exception of a
light blue vertical
On Wed, 1 Dec 2004 10:09:49 -0500, Paul Kidwell [EMAIL PROTECTED] wrote:
This is proving to be a tough nut to crack.
Met with success last night! I had stopped off and bought some DVD-Rs and on a
whim picked up a another brand of CD-RWs (Maxell) I gave the CD-RWs a try
first
and it
On Wednesday 01 December 2004 11:30, nate s wrote:
Well, firstly, the fundamental difference between RF and IR is that IR
requires line of sight, RF does not.
RF typically has much better range also.
Second, the recievers on the PVR
cards only support one remote protocol, so it's hard to
On Tue, 30 Nov 2004 21:10:27 -0800, Jarod Wilson [EMAIL PROTECTED] wrote:
On Tuesday 30 November 2004 07:48, Shawn wrote:
You want a good universal receiver with 56KHz capability? Go with the
USB-UIRT with the 56K option from http://www.usbuirt.com/, but be sure
to get the 56K option.
Lane Schwartz wrote:
From: Matthew Laird [EMAIL PROTECTED]
Reply-To: Discussion about mythtv [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: [mythtv-users] Manual record/stop
Date: Mon, 29 Nov 2004 12:48:00 -0800 (PST)
I have a question about Myth's abilities is there the an ability to
start
I can confirm that I've noticed the same problem. In my case, when I
try to jump back one frame, it instead goes foward 2 frames. I can
work around by jumping back 1/2 sec, then going foward. Also, jumping
back to the last cutpoint doesn't work either, though, again, foward
works fine (and it
You can get at the RGB signal of most any video card through the VGA
connector. In fact, I believe you can even get pre-made VGA to
SCART-RGB adapters.
As far as for providing low line rate and interlaced output, I believe
that most any card can do that if you can find the right modeline.
-Nate
On Wed, 1 Dec 2004, Kyle Rose wrote:
I posted a message on the pcHDTV forums about this, but they don't
appear to read their own forum because I have gotten zero response
about this. So, I figured I'd try here since we are probably the
largest easily-characterizable subset of pcHDTV users.
If for any reason anyone needs a patch, I have one.
On Wed, 2004-12-01 at 14:06 -0800, nate s wrote:
1) yes
2) don't know
3) you can pick up the latest tarball with the usb-uirt support at
www.lirc.org.
-Nate
On Wed, 1 Dec 2004 9:49:48 -0500, [EMAIL PROTECTED]
[EMAIL PROTECTED]
On Fri, 2004-11-26 at 17:07 -0500, Khanh Tran wrote:
Yes, in almost all cases the frontend needs to be faster.
I hate to hijack the thread but i'm just curious. I just bought a PVR
350 card and have a Athlon XP 2400 w/ 512 Ram. Will that be enough
to watch live TV? and will that be
Jeff Thompson wrote:
Try:
apt-get remove myth*
and if that doesn't get it all, then add:
apt-get remove libmyth*
Hmmm, I see from my reading and your post
that apt-get supports regex in the package name.
Interesting, and I will probably get by with this, but
it seems to
I was wondering if there is a way to play tivo (I have a directTivo
series 2), inside mythtv.
My goal is to utilize myth's commercial skipping featuring. I can
currently play the files in mplayer.
There was a thread on a BB about adding this to tivo-player (or some
such name), but I have not
Okay, I'm definitely scratching my head on this one...
I recently got a new Chaintech 7NIF2 mobo w/nForce2 (MCP) sound.
Everything's good, except no matter what I do I can't control the
volume! I've tried the i810 OSS driver (what FC1 detected), and I've
also tried the nvsound.o module from
I have the same thing. I have build my FC3 machine with jarods guide,
using stable packages. Altho my pvr worked when I had just installed
it. I think it startead doing this
writeblock thing after first boot. And I did not get the ivtv driver
to load automatically.
I don't realiy know that could
what xbox version do you have?
I have the same problem with one of my xboxes and have been trying to
get the image to fill the screen and was wondering if you would mind
posting the kernel args etc?
thanks
anders
On Wed, 1 Dec 2004 15:10:44 -0500, Jonathan Oexner
[EMAIL PROTECTED] wrote:
Sorry to reply to my onw post, but just to be clear, this happens when
I go into Watch Recordings, and the live preview tries to start.
On Thu, 2 Dec 2004 01:14:28 -0600, Shawn Leas [EMAIL PROTECTED] wrote:
It only happens when myth is currently recording something, and I have
it setup where
24 matches
Mail list logo